GEORGIE BOY Recalls

Jun 21, 2006 – CERTAIN MOTOR HOMES BUILT ON WORKHORSE CHASSIS MAY HAVE BEEN EQUIPPED WITH INCORRECT STEERING INTERMEDIATE SHAFTS. THE SPLINE CAN STRIP WHILE THE STEERING WHEEL IS BEING TURNED.

Mar 17, 2005 – ON CERTAIN MOTOR HOMES BUILT ON WORKHORSE CHASSIS, FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD (FMVSS) NO. 101, "CONTROLS AND DISPLAY" AND STANDARD NO. 105 "HYDRAULIC AND ELECTRIC BRAKE SYSTEMS." MODELS WITH ACTIA INSTRUMENT CLUSTER, THE INCORRECT SOFTWARE PROGRAMMED INTO THE CLUSTER SUCH THAT CERTAIN WARNINGS ARE NOT DISPLAYED.

Dec 21, 2004 – CERTAIN MOTOR HOMES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 104, "WINDSHIELD WIPING AND WASHING SYSTEM." WHILE TRAVELING AT HIGH SPEEDS, THE WINDSHIELD WIPERS COULD EITHER SKIP ACROSS THE WINDSHIELD OR SWING TOO FAR OUTWARD CAUSING THE BLADE TO TRAVEL INTO THE RADIUS OF THE WINDSHIELD RESULTING IN THE SPLINE OF THE WIPER ARM AND THE SPINDLE TO FAIL. THE RESULT IS A WIPER STUCK IN THE OUT POSITION.

Jun 22, 2004 – ON CERTAIN MOTOR HOMES EQUIPPED WITH SAMSUNG MICROWAVE OVENS, MODELS MR1031WB, MR1032BB, MR1033SB, MR1351WB, AND MR1352BB, THE MICROWAVES WERE PRODUCED WITH A DEFECTIVE MEMBRANE PANEL. THESE MICROWAVE OVENS HAVE THE ONE TOUCH INSTANT COOK FUNCTION FOR ITEMS SUCH AS POPCORN, POTATO, ETC.

Oct 14, 2003 – ON CERTAIN MOTOR HOMES EQUIPPED WITH SAMSUNG MICROWAVE OVENS, THESE UNITS WERE PRODUCED WITH A DEFECTIVE PANEL. AN ELECTRICAL SHORT CAN OCCUR BETWEEN CIRCUIT PATTERNS ON THE MEMBRANE PANEL, ESPECIALLY OVERLAPPED BY A "JUMPER" OR JUMP WIRE. THIS MAY CAUSE THE OVEN TO ACTIVATE WITHOUT PRESSING ANY KEY PADS.

Feb 12, 2003 – CERTAIN MOTOR HOME CHASSIS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 105, "HYDRAULIC AND ELECTRIC BRAKE SYSTEMS." THE BRAKE SYSTEM WARNING INDICATOR MAY NOT FUNCTION AS REQUIRED BY THE STANDARD.

Jan 07, 2003 – ON CERTAIN MOTOR HOMES EQUIPPED WITH CATERPILLAR 3126E HYDRAULICALLY CONTROLLED ELECTRONICALLY ACTUATED UNIT INJECTED DIESEL ENGINES WITH HIGH EFFICIENCY PUMPS (HEP8). THE PUMP COMPONENTS MAY EXPERIENCE A HIGH PRESSURE SEAL FAILURE WHICH CAN RESULT IN A SHORT PERIOD OF ROUGH RUNNING AND SUBSEQUENT ENGINE STALL DUE TO A LOSS OF INJECTION ACTUATION PRESSURE.

Nov 20, 2002 – CERTAIN MOTOR HOMES EQUIPPED WITH NORCOLD REFRIGERATOR COOLING UNITS MODEL NUMBERS 1200LR AND 1200RIM WITH SERIAL NUMBERS BETWEEN 700000 AND 1008700 AND MANUFACTURED BETWEEN DECEMBER 1996 AND FEBRUARY 1999. THESE REFRIGERATORS CAN EXPERIENCE LOW CYCLE FATIGUE FAILURE WHICH CAN LEAD TO THE LIQUID SOLUTION SLOWLY LEAKING FROM THE SEALED, PRESSURIZED COOLING UNIT THROUGH A SMALL CRACK.

Nov 15, 2002 – CERTAIN MOTOR HOMES EQUIPPED WITH NORCOLD REFRIGERATOR COOLING UNITS MODEL NUMBERS 442, 443, 452, EV452, 453, 462, EV462, 463, EV463, 482, EV482, 483, EV483, 874, AND 875 MANUFACTURED BETWEEN JANUARY 1987 AND MAY 1995. THESE REFRIGERATORS CAN EXPERIENCE A BREAK DOWN IN A RUBBER SEAL WITHIN THE GAS VALVE. AS THE RUBBER SEAL AGES, A LEAK MAY OCCUR, ALLOWING PROPANE GAS TO ACCUMULATE IN THE BURNER AREA.

Mar 15, 2001 – VEHICLE DESCRIPTION: MOTOR HOMES EQUIPPED WITH NORCOLD REFRIGERATOR COOLING UNITS MODEL NUMBERS N841, N821, N641, AND N621. THESE REFRIGERATORS CAN EXPERIENCE A COOLING SYSTEM LEAK CAUSED BY OPERATION IN THE AC ELECTRIC MODE. IF A LEAK OCCURS, THE COOLING PERFORMANCE OF THE REFRIGERATOR WILL DETERIORATE, REQUIRING IMMEDIATE REPLACEMENT OF THE COOLING UNIT.