GIRARDIN Recalls

Aug 04, 2005 – CERTAIN GIRARDIN MY 2002 THROUGH 2005 MB II & MB IV SCHOOL BUSES MANUFACTURED BETWEEN JANUARY 1, 2002, AND AUGUST 8, 2005, AND EQUIPPED WITH "5" SERIES STOP ARMS MANUFACTURED BY SPECIALTY MANUFACTURING COMPANY. IN EXTREMELY COLD WEATHER, THE MICROSWITCHES USED INTERNALLY TO POSITION THE SIGN IN THE OPEN AND CLOSED POSITIONS MAY MALFUNCTION, CAUSING THE SIGN TO OPEN OR CLOSE IN AN IMPROPER POSITION, OR TO NOT OPEN AT ALL.

Apr 07, 2005 – CERTAIN MY 2003-2005 GIRARDIN MB II AND MB IV SCHOOL BUSES MANUFACTURED BETWEEN MARCH 20, 2003, AND DECEMBER 16, 2004, (SEE AMENDED NONCOMPLIANCE REPORT RECEIVED AUGUST 18, 2005) BUILT ON FORD AND GM CHASSIS. SEATS EQUIPPED WITH THE CHILD SEAT ANCHORAGE SYSTEM FAILS TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 222, 'SCHOOL BUS PASSENGER SEATING AND CRASH PROTECTION.'

Jan 24, 2005 – CERTAIN GIRARDIN MINIBUS MY 2004 AND 2005 MB II AND MBIV FORD DIESEL SCHOOL BUSES EQUIPPED WITH OPTIONAL BBX (BATTERY BOX) MANUFACTURED BETWEEN MAY 14, 2004 AND FEBRUARY 9, 2005. THE ELECTRICAL CABLES (P/NOS. 27DF01 AND 27DF3001) BETWEEN THE BATTERIES AND THE BATTERY JUNCTION BOX (UNDER THE HOOD) HAS NO FUSABLE LINK FOR CABLE PROTECTION.

Sep 07, 2004 – CERTAIN MBII AND MBIV SCHOOL AND COMMERCIAL BUSES BUILT ON FORD E-350 & E-450, GM 3500 CHASSIS, MANUFACTURED BETWEEN JUNE 1, 1999, AND DECEMBER 31, 2003, AND EQUIPPED WITH SURE-LOK WHEELCHAIR TIE-DOWN SECUREMENT ASSEMBLIES P/N 8625-13. THE SPROCKET TEETH OF THE RETRACTOR ASSEMBLY MAY BE OUT OF ALIGNMENT CAUSING THE LOAD PAWL NOT TO FULLY SEAT IN THE SPROCKET TEETH.

May 27, 2004 – CERTAIN MB IV SCHOOL BUSES BUILT ON FORD E-450 CHASSIS, MANUFACTURED BETWEEN FEBRUARY 26 AND MAY 7, 2004, WITH OPTION AWB-2, WAS EQUIPPED WITH A PRESSURE SWITCH FITTING P/N 23A200 ON THE POWER STEERING LINE TO ASSIST THE POWER BRAKE THIS FITTING MAY LEAK CAUSING LOSS OF POWER STEERING ASSIST.

Oct 03, 2003 – MY 2003 MBII & MBIV SCHOOL BUSES BUILT ON FORD E-350 & E-450, GM 3500 CHASSIS, AND MANUFACTURED BETWEEN AUGUST 25 AND SEPTEMBER 17, 2003. THESE BUSES ARE EQUIPPED WITH BEAM'S INDUSTRIES SEAT BELTS. THE METAL FRAME OF THE SEAT BELT BUCKLE MAY FRACTURE DUE TO POSSIBLE EMBRITTLEMENT OF THE STEEL, RESULTING IN A POTENTIAL RELEASE OF THE ENGAGED TONGUE DURING USE. THESE SEAT BELT ASSEMBLIES DO NOT COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES."

Aug 05, 2001 – VEHICLE DESCRIPTION: CERTAIN MINI SCHOOL BUSES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 222, "SCHOOL BUS PASSENGER SEATING AND CRASH PROTECTION." THE FOAM ON THE SEATS AND BARRIERS DO NOT ABSORB ENOUGH IMPACT ENERGY TO MEET THE STANDARD.

Apr 26, 2001 – VEHICLE DESCRIPTION: SCHOOL BUSES EQUIPPED WITH ROSCO CROSS OVER MIRRORS. THE POSITION OF THE DRIVER'S REAR VIEW MIRROR DOES NOT ALLOW COMPLETE VISIBILITY OF PEDESTRIANS AS REQUIRED UNDER FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 111, "REARVIEW MIRRORS."

Apr 24, 2001 – VEHICLE DESCRIPTION: COMMERCIAL AND SCHOOL BUS BODY MINIBUSES. THE INNER BODY PANEL COULD CONTACT AND DAMAGE THE WIRING HARNESS BY THE DRIVER'S SEAT. IF THE WIRES ARE DAMAGED, AND A CONTACT BETWEEN THOSE WIRES OCCURS, THE AIR BAG COULD INADVERTENTLY DEPLOY.

Jul 29, 1997 – VEHICLE DESCRIPTION: TRANSIT COACHES. THE SEAT SUPPORT CHANNELS OF THE FLOOR STRUCTURE IS LOCATED CLOSE TO THE FUEL FILLER PIPE. THE PIPE COULD BE PUNCTURED AND WHEN FILLING THE GASOLINE TANK, FUEL CAN BE SPILLED ON THE ROAD SURFACE.