GLAVAL Recalls

Mar 20, 2009 – ATLANTIC BUS SALES IS RECALLING 42 RICON WHEELCHAIR LIFTS WHICH IT INSTALLED ON CERTAIN MY 2006 AND 2007 ELDORADO AND GLAVAL TRANSIT BUSES. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 404, "PLATFORM LIFT INSTALLATIONS IN MOTOR VEHICLES." THE ANTI-STOW INTERLOCK MAY NOT DETECT THE PRESENCE OF A WHEELCHAIR OR MOBILITY AID USER. THE PRESSURE SENSING SWITCH THAT DETECTS THE PRESENCE OF WEIGHT ON THE PLATFORM WAS NOT ADJUSTED TO THE NECESSARY SENSITIVITY LEVEL. THE LIFT COULD STOW EVEN THOUGH SOMEONE OR SOMETHING IS STILL ON THE LIFT.

Feb 18, 2009 – GLAVAL BUS IS RECALLING 117 MY 2003-2006 CONCORDE AND MY 2003-2004 STAR CRUISER EQUIPPED WITH ARVINMERITOR OR AXLE ALLIANCE COMPANY 6,000 THROUGH 8,000 POUND FRONT AXLES UTILIZING A FOUR PIECE SPINDLE-NUT SET. INSTALLATION OF A FOUR-PIECE SPINDLE NUT SET WITH A THIN SPINDLE NUT MAY LEAD TO DAMAGE OF THE WHEEL END, INCLUDING INCORRECT END PLAY, DEGRADATION OF LUBRICATION, WEAR OF THE SPINDLE NUT AND BEARING JOURNAL, OIL CONTAMINATION WITH METAL SHAVINGS, AND PREMATURE BEARING FAILURE.

Sep 24, 2008 – GLAVAL BUS IS RECALLING 171MY 2005-2006 UNIVERSAL, PRIMETIME, TITAN, AND APOLLO TRANSIT AND SHUTTLE BUSES EQUIPPED WITH RICON PLATFORM STYLE WHEELCHAIR LIFTS. THESE LIFTS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 403, "PLATFORM LIFT SYSTEMS FOR MOTOR VEHICLES." THE ANTI-STOW INTERLOCK MAY NOT DETECT THE PRESENCE OF A WHEELCHAIR OR MOBILITY AID USER. THE PRESSURE SENSING SWITCH THAT DETECTS THE PRESENCE OF WEIGHT ON THE PLATFORM WAS NOT ADJUSTED TO THE NECESSARY SENSITIVITY LEVEL. THE LIFT COULD STOW EVEN THOUGH SOMEONE OR SOMETHING IS STILL ON THE LIFT.

Apr 07, 2008 – GLAVAL BUS IS RECALLING 466 BUSES EQUIPPED WITH RICON PLATFORM STYLE WHEELCHAIR LIFTS. THESE BUSES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 404, "PLATFORM LIFT INSTALLATIONS IN MOTOR VEHICLES." THE THRESHOLD WARNING SYSTEM MAY NOT DETECT THE PRESENCE OF A WHEELCHAIR OR MOBILITY AID USER IN A CERTAIN SPOT WITHIN THE DEFINED THRESHOLD AREA.

Jan 28, 2008 – ON CERTAIN BUSES BUILT ON FREIGHTLINER XB-R CHASSIS AND EQUIPPED WITH ZF MODEL 8018 STEERING GEARS, THESE GEARS MAY HAVE BEEN ASSEMBLED WITH THE INCORRECT RECIRCULATING BALL SPACER. THIS COULD POTENTIALLY ALLOW THE RECIRCULATION BALLS TO ESCAPE FROM THE RECIRCULATION BALL CIRCUIT RESULTING IN A LOSS OF STEERING.

Jan 20, 2008 – CERTAIN TRANSIT BUSES EQUIPPED WITH BRAUN PLATFORM LIFTS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 404, "PLATFORM LIFT INSTALLATIONS IN MOTOR VEHICLES." A PASSENGER CAN APPROACH THE EXPOSED LIFT DOORWAY WITHOUT THE AUDIBLE ALARM ALERTING THEM OF THEIR PROXIMITY TO THE THRESHOLD.

Jul 18, 2007 – FREIGHTLINER IS RECALLING CERTAIN SCHOOL BUS CHASSIS, HEAVY TRUCKS, VAN CHASSIS, RV MOTORHOME CHASSIS MANUFACTURED FROM JANUARY 5 TO MAY 17, 2007, EQUIPPED WITH AXLE ALLIANCE COMPANY (AAC) FRONT AXLES. DURING THE FRONT AXLE ASSEMBLY, THE FASTENERS THAT ATTACH THE STEERING ARM OR TIE ROD ARMS TO THE SPINDLE MAY BE OVER OR UNDER TIGHTENED.

Mar 01, 2007 – CERTAIN BUSES EQUIPPED WITH RICON PLATFORM STYLE WHEELCHAIR LIFTS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 403, "PLATFORM LIFT SYSTEMS FOR MOTOR VEHICLES." THE INNER BARRIER INTERLOCK SWITCH SYSTEM IN THE LIFT BASEPLATE MAY NOT DETECT THE PRESENCE OF A PASSENGER (EITHER WHEELCHAIR OR STANDEE) ON THE BARRIER AND CAN ALLOW THE PLATFORM TO MOVE DOWN MORE THAN ONE INCH BELOW FLOOR LEVEL WHEN OCCUPIED.

Aug 31, 2006 – CERTAIN BUSES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 120, 'TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS.' AN INCORRECTLY LABELED WEIGHT STICKER WAS ATTACHED.

Aug 07, 2006 – CERTAIN TRANSIT BUSES, BUILT ON FORD, FREIGHTLINER, AND GENERAL MOTORS CHASSIS, FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, 'SEAT BELT ASSEMBLY ANCHORAGES.' THE SEATS EQUIPPED WITH SEAT BELTS MAY HAVE BEEN BOLTED TO THE BUS STRUCTURE INCORRECTLY.