GMC C6500 Recalls

Feb 25, 2015 – Farber Specialty Vehicles (Farber) is recalling various specialty vehicles modified by Farber and equipped with model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack.

Nov 04, 2002 – CERTAIN MEDIUM DUTY C-SERIES AND B7 SCHOOL BUS CHASSIS EQUIPPED WITH A 7.4 LITER GAS ENGINE AND AN IMPCO LPG CONVERSION KIT. SOME OF THESE VEHICLES MAY HAVE ENGINE BACKFIRES WITH SUFFICIENT FORCE TO DAMAGE THE ENGINE AIR INTAKE SYSTEM AND THE AIR CLEANER FILTER ELEMENT.

Jul 11, 2002 – ON CERTAIN MEDIUM DUTY TRUCKS EQUIPPED WITH 8.1 L ENGINES AND LEFT HAND OR DUAL FUEL TANKS, SOME OF THESE VEHICLES HAVE A CONDITION WHERE THE FUEL FILTER-TO-COMPONENT BOX MOUNTING BOLTS ARE REVERSED. WITH THE BOLTS REVERSED, THE THREADED BOLT END IS ORIENTED TOWARD THE FRONT WALL OF THE LEFT HAND FUEL TANK.

Sep 07, 2000 – VEHICLE DESCRIPTION: SCHOOL BUSES, MEDIUM DUTY TRUCKS AND TRACTORS BUILT WITH BENDIX AIR ABS WITH AN EC-17 1030R ELECTRONIC CONTROL UNIT (ECU), THERE HAVE BEEN REPORTS OF UNWANTED ABS ACTIVATION AT LOW SPEEDS CAUSED BY 1) CHAFED ABS WHEEL SPEED SENSOR WIRES ON ROTATING PARTS OR 2) A DAMAGED COMPONENT AT THE WHEEL END THAT GENERATES A CERTAIN TYPE OF ERRATIC SENSOR SIGNAL.

Aug 23, 2000 – VEHICLE DESCRIPTION: MEDIUM DUTY TRUCKS. THE TRANSMISSION FLUID COULD LEAK FROM A HEAT DEGRADED TRANSMISSION FLUID COOLER HOSE ONTO THE EXHAUST SYSTEM ON THE PASSENGER'S SIDE OF THE VEHICLE.

Nov 15, 1999 – VEHICLE DESCRIPTION: MEDIUM DUTY CONVENTIONAL CAB TRUCKS AND SCHOOL BUS CHASSIS EQUIPPED WITH AN AUTOMATIC TRANSMISSION, HAVE TRANSMISSION SHIFT CABLE END RODS THAT HAVE NOT BEEN CRIMPED TO THE PROPER SPECIFICATION. OVER TIME, THE SHIFT CABLE COULD BE PULLED OUT OF THE ROD END CAUSING THE DRIVER TO LOSE THE ABILITY TO MANUALLY CHANGE TRANSMISSION GEARS.

Apr 08, 1998 – VEHICLE DESCRIPTION: MEDIUM DUTY TRUCKS EQUIPPED WITH AIR BRAKES AND ANTI-LOCK BRAKE SYSTEMS. CHAFFING OF THE ELECTRIC BRAKE CONTROL HARNESS CAN OCCUR RESULTING IN AN ELECTRICAL GROUNDING CONDITION. THIS WILL ILLUMINATE A WARNING LIGHT ON THE INSTRUMENT PANEL AND SHUT OFF THE ABS FEATURE.