HME 1871 Recalls

Feb 18, 2022 – HME, Inc. (HME) is recalling certain 2019-2021 AF1 and 1871 vehicles. The fuel tubes between the fuel rail and the injectors for cylinders four, five, and six may fatigue and crack, which can result in a high pressure fuel leak.

Oct 11, 2021 – HME, Inc. (HME) is recalling certain 2017-2020 Ahrens-Fox model 34 Type 3, Rescue, Pumper, Tanker, Aerial, CommFox, WolfSA Tanker, 1871-SFO, 1871-W, 1871-Spectr, and AF1 fire trucks. The sealing washer may not seat correctly in the pilot boreholes, allowing the high-pressure fuel rail assembly to leak.

Apr 22, 2021 – HME, Inc. (HME) is recalling certain 2013-2021 AF1, 1871, and SFO vehicles. Insufficient voltage and/or cracked wiring insulation may cause the aerial controls system to fail.

Apr 22, 2021 – HME, Inc. (HME) is recalling certain 2016-2021 AF1 and 1871 vehicles. The self-leveling function may malfunction, causing the aerial bucket to move beyond the level position.

Feb 24, 2020 – HME, Inc. (HME) is recalling certain 2016-2020 AF1, 1871 and SFO emergency vehicles. The fuse box may be missing an O-Ring seal, potentially allowing moisture or contaminants into the fuse box.

Jan 11, 2019 – HME, Inc (HME) is recalling certain 2017-2018 1871 vehicles, equipped with Whelen accessory brake lights. Depending on the specific wiring of the vehicle, the brake lights may falsely illuminate even without the brake pedal being pressed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Nov 03, 2014 – HME, Inc. (HME) is recalling certain model year 2000-2006 1871 emergency vehicles manufactured January 1, 2000, to March 15, 2006. The mechanical springs used to return the accelerator pedal to idle after the driver lifts their foot off the pedal may break.

Jan 26, 2012 – HME IS RECALLING TWO MODEL YEAR 2011 1871 FIRE TRUCKS EQUIPPED WITH CUMMINS ENGINES. THE V-BAND CLAMP ASSEMBLY USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC) DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.

Nov 10, 2011 – HME CORPORATION IS RECALLING CERTAIN MODEL YEAR 2009 THROUGH 2012 FIRE TRUCKS MANUFACTURED FROM JANUARY 16, 2009, THROUGH NOVEMBER 1, 2011, BUILT WITH MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC) SYSTEM MANUFACTURED FROM SEPTEMBER 15, 2005 THROUGH SEPTEMBER 1, 2011, WITH PART NUMBER 446 065 027 0. UNDER CERTAIN ROAD AND DRIVING CONDITIONS, VEHICLE BODY ROLL AND ROAD INCLINATION CHARACTERISTICS MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION OF THE ELECTRONIC STABILITY CONTROL (ESC) SYSTEM. THIS MIGHT CAUSE THE ESC TO PERCEIVE AN OVER STEERING SITUATION AND THEREFORE APPLY THE OUTER WHEEL BRAKE ON THE FRONT AXLE UNTIL THE VEHICLE IS PERCEIVED TO BE STABLE.

Aug 28, 2009 – HME IS RECALLING MODEL YEAR 2009 1871 FIRE TRUCKS BUILT ON CUMMINS' DIESEL ENGINE. THE VEHICLES MAY BE DESIGNED WITH A HARD WIRED, DASH-MOUNTED SWITCH THAT ENABLES THE VEHICLE OPERATOR TO INHIBIT AFTERTREATMENT DIESEL PARTICULATE FILTER REGENERATION IN ENVIRONMENTS WHERE THE OPERATOR BELIEVES IT MAY BE UNSAFE FOR ELEVATED EXHAUST TEMPERATURES. DUE TO AN ISSUE WITH THE LOGIC IN THE ECM SOFTWARE IN THESE ENGINES, THE SWITCH MAY NOT FUNCTION CORRECTLY, LEADING THE OPERATOR TO BELIEVE THAT THE SWITCH IS IN "INHIBIT" MODE WHEN IT IS NOT.