IC BUS FECB Recalls

Dec 23, 2015 – Navistar, Inc. is recalling certain model year 2007-2015 IC CE transit buses, 2008-2011 IC FE transit buses and 2009-2013 IC RE transit buses equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts by Ricon. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.

Nov 03, 2014 – Navistar, Inc.(Navistar) is recalling certain model year 2007-2015 IC CE transit buses manufactured January 23,2006, to May 12, 2014, 2008, and 2011 IC FE transit buses manufactured October 5, 2006, to September 28, 2009, and 2009-2010, and 2013 IC RE transit buses manufactured September 19, 2007, to November 29, 2011, equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation after January 1, 2006. The platform side plate of the affected wheelchair lifts may crack.

Sep 27, 2012 – Navistar is recalling certain model year 2006 through 2010 IC transit buses, models 3300, 3200IM, CECB, FCCB, FECB, HCCB, RCCB, and RECB, manufactured from March 16, 2005, through February 24, 2009, equipped with I-6 engines within feature codes 12N (PL, PM, PN, PR, PS, PT, PU, PV, SA, SG, SK, SL, SM, SV, SZ, TB, UA, UB, UC, and UD). The high pressure engine oil line may develop a leak or possibly rupture.

Jun 14, 2010 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2009 THROUGH 2011 IC CE, FE, RE, AND BE MODEL NON SCHOOL BUSES MANUFACTURED FROM DECEMBER 10, 2007 THROUGH JANUARY 12, 2010 AND FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.

Feb 10, 2009 – NAVISTAR IS RECALLING 61,316 MY 2001 THROUGH 2009 IC BE, CE, AND FE MODEL COMMERCIAL AND SCHOOL BUSES MANUFACTURED BETWEEN FEBRUARY 2, 2000 AND JUNE 2, 2008, EQUIPPED WITH AN ENTRANCE DOOR STEPWELL HEATER FEATURE CODE 0048PMS OR 0548001 AND/OR A REAR WALL MOUNTED HEATER FEATURE CODE 0048TAR OR 0048PSX. THE AFFECTED HEATER UNITS MAY FAIL IN LOW SPEED OPERATION CAUSING ELEVATED TEMPERATURES.

Feb 27, 2008 – INTERNATIONAL IS RECALLING 34,993 MY 2006-2008 SCHOOL AND TRANSIT BUSES AND HEAVY DUTY TRUCKS/TRACTORS MANUFACTURED BETWEEN JUNE 1, 2006 AND JUNE 28, 2007, EQUIPPED WITH INTERNATIONAL DT466 OR DT570 ENGINES. THE BASE PLATE OF THE ENGINE OIL COOLER MAY CRACK ALLOWING PRESSURIZED OIL TO LEAK INTO THE ENGINE COMPARTMENT.

Jan 09, 2008 – INTERNATIONAL IS RECALLING 1,027 MY 2006-2007 BE, CE, FE, AND RE SCHOOL AND COMMERCIAL BUSES MANUFACTURED FROM JULY 11, 2005 THROUGH JULY 31, 2006, AND EQUIPPED WITH BRAUN PLATFORM LIFTS FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 404, "PLATFORM LIFT INSTALLATIONS IN MOTOR VEHICLES." A PASSENGER CAN APPROACH THE EXPOSED LIFT DOORWAY WITHOUT THE AUDIBLE ALARM ALERTING THEM OF THEIR PROXIMITY TO THE THRESHOLD.

Feb 23, 2007 – CERTAIN MY 2004-2007 IC CE, RE, AND FE COMMERCIAL AND SCHOOL BUSES MANUFACTURED BETWEEN MARCH 12, 2004, AND NOVEMBER 29, 2006. THE SIDE EMERGENCY DOOR HOLDBACK MECHANISM MAY NOT BE INSTALLED IN THE PROPER LOCATION. THIS MAY CAUSE THE MECHANISM TO HOLD THE DOOR IN THE CLOSED POSITION.

Dec 21, 2006 – CERTAIN IC SCHOOL AND COMMERCIAL BUSES MANUFACTURED BETWEEN OCTOBER 11, 2005, AND OCTOBER 31, 2006. THESE BUSES HAVE THE FOLLOWING SAFETY ISSUES: IF THE DRIVER'S SEAT IS IN THE HIGHEST AND MOST REAR POSITION, THE BACK OF THE SEAT MAY LEAN AGAINST A BARRIER BEHIND THE SEAT, OR AGAINST THE SEAT BACK. THIS WILL PREVENT THE SEAT BELT FROM RETRACTING WHICH FAILS TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, SEAT BELT ASSEMBLIES. WHEN ADJUST THE SEAT TO A HIGHER POSITION, THE DRIVER MAY PULL THE SEAT PAST THE LAST STOP SO THAT THE SEAT SITS ON THE ADJUSTING PIN, WHICH ALLOWS THE SEAT TO TEETER ON TOP OF THE PIN. IF OVER-TRAVEL OCCURS, THE UPPER SEAT PEDESTAL TUBE COULD SEPARATE FROM THE LOWER PEDESTAL TUBE DURING VEHICLE OPERATION. IF THE DRIVER IS SITTING IN THE DRIVER'S SEAT AND REACHES TO ADJUST THE SEAT HEIGHT, THEIR WEIGHT WILL CAUSE THE SEAT TO DROP, WHICH COULD RESULT IN THEIR HAND BEING PINCHED BETWEEN THE SEAT AND THE LEVER. THE DRIVER'S SEAT IS DIFFICULT TO ADJUST TO A HIGHER POSITION BECAUSE OF THE ADDITIONAL WEIGHT OF THE ALL BELTS TO SEAT (ABTS) DESIGN.