INTERNATIONAL DURASTAR Recalls

Feb 19, 2014 – Navistar, Inc. (Navistar) is recalling certain model year 2014 and 2015 International Durastar trucks manufactured January 11, 2014, through January 23, 2014, and equipped with steering feature codes 05PRG, 05PRR, 05PRU, 05PRV or 05PSM. The bolts used to mount the steering gear to the frame may fail, resulting in either looseness of steering or the loss of steering.

Feb 19, 2014 – Navistar, Inc. (Navistar) is recalling certain model year 2011-2014 International DuraStar Trucks and 2012-2014 International TerraStar trucks intended for emergency vehicle operations manufactured from February 25, 2010, through February 18, 2013, and equipped with 2010 MaxxForce 7 V8 diesel engines. In the affected vehicles, the Engine Warning Protection Shutdown (EWPS) was inadvertently re-enabled when the Engine Control Module (ECM) was recalibrated.

Apr 17, 2013 – Navistar is recalling certain model year 2011-2012 International Lonestar, model year 2012-2013 International Terrastar and model year 2011-2013 International DuraStar, ProStar, TranStar, and WorkStar commercial trucks manufactured from June 1, 2010, through March 7, 2012 and equipped with day cab codes 16CAB, 16030, or 16196 and feature codes 16WCE, 16WCR, 16XWD, 16XWE, 16XWV, 16XXB, 16XXD, 16XXE, 16XXG, or 16XYN sun shades. The sun shade may not be properly secured to the cab roof panel which may result in partial or full separation of the sun shade from the roof panel.

Jan 17, 2013 – Navistar is recalling certain model year 2012-2013 IC Bus brand model 1300FBC, CE, HC, and RE buses; model year 2011-2013 International brand model Durastar, model year 2013 International brand Workstar trucks; model year 2013 Holiday Rambler brand model Ambassador and Endeavor vehicles; and model year 2013 Monaco brand model Diplomat and Knight vehicles. These vehicles were manufactured August 5, 2010 through September 6, 2012 and are equipped with certain 2011-2013 model year I-6 engines with feature codes 12NUK, 12NUL, 12NUM, 12NUN, 12NUP, 12NUR, 12NUS, 12NUT, 12NUU, 12NUV, 12NUX, 12NUY and 12NUZ. The injection pressure regulator (IPR) harness wire may break due to vibrational damage. This could cause an unexpected shut down of the engine.

Oct 18, 2012 – Navistar is recalling certain model year 2012 International DuraStar and Workstar commercial trucks, manufactured from April 26, 2011, through December 19, 2011, and equipped with a 7 degree passenger seat (feature code 16JAJ or SCBA). During a load test, the front passenger seat separated from its mounting rails. Thus, the vehicles failed to conform to the requirements of Federal Motor Vehicle Safety Standard No. 207, "Seating Systems."

Sep 20, 2012 – Navistar is recalling certain model year 2013 International 8600, 2012 and 2013 Durastar, 2011-2013 ProStar, and 2012 WorkStar trucks, manufactured from November 23, 2010, through April 02, 2012, and equipped with piston spring brake feature code 04EVP. The piston bore area of the parking brake chamber may have an air leak could result in the parking brake not fully releasing.

Aug 14, 2012 – Navistar is recalling certain model year 2011-2013 International vehicles manufactured from November 2, 2010 through May 25, 2012, equipped with Bendix air disc brakes. Bolts that fasten the air disc brake caliper to the caliper mounting plate may not have been tightended to their specified torque. This may cause the mouting bolts to become loose and possibly allow the air disc brake caliper to separate from the caliper mounting plate, resulting in an unexpected pull condition during braking application or an unexpected increase in stopping distance.

Jun 20, 2012 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2013 INTERNATIONAL DURASTAR TRUCKS, MANUFACTURED FROM FEBRUARY 12, 2012, THROUGH MARCH 19, 2012, EQUIPPED WITH CAB CODES 16030 OR 16AAK. THE WINDSHIELD AND BACKLIGHT GLASS ON THESE VEHICLES WERE INSTALLED WITHOUT PRIMER SEAL APPLICATION. OVER TIME, THIS MAY CAUSE SEPARATION FROM THE CAB.

Feb 13, 2012 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012-2013 IC BUS CE-C, HC, AND INTERNATIONAL 9400 AND CERTAIN MODEL YEAR 2011 THROUGH 2013 INTERNATIONAL DURASTAR, PAYSTAR, WORKSTAR, TRANSTAR, LONESTAR, PROSTAR, 9200, AND 9800, AND CERTAIN MODEL YEAR 2013 INTERNATIONAL 9900, VEHICLES, MANUFACTURED FROM DECEMBER 2, 2010, THROUGH JANUARY 26, 2012, AND EQUIPPED WITH BENDIX ATR-6 TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKES CAUSING CONTINUOUS BRAKE APPLICATION.

Dec 19, 2011 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012 INTERNATIONAL DURASTAR AND IC BUS HC HEAVY TRUCKS AND BUSES MANUFACTURED FROM FEBRUARY 10, 2011, THROUGH FEBRUARY 18, 2011,THAT WERE EQUIPPED WITH A MERITOR MFS08 SERIES NON-DRIVE FRONT STEER AXLE. DURING THE ASSEMBLY PROCESS, THE STEERING ATTACHMENT BOLTS MAY HAVE BEEN INSUFFICIENTLY TORQUED.