INTERNATIONAL LONESTAR Recalls

Jul 19, 2012 – Navistar is recalling certain model year 2010-2011 International Lonestar vehicles, manufactured from January 29, 2009, through February 21, 2011 and equipped with the Harley Davidson option package with feature codes 27DRV and 28DRV. Over time, due to corrosion and fatigue, the wheels may crack, resulting in possible wheel separation from the vehicle.

May 02, 2012 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2010 THROUGH 2013 PAYSTAR, WORKSTAR, TRANSTAR, AND PROSTAR, AND MODEL YEAR 2012 AND 2013 LONESTAR COMMERCIAL TRUCKS MANUFACTURED FROM JUNE 1, 2009, THROUGH APRIL 4, 2012, EQUIPPED WITH A MAXXFORCE 11 OR 13 ENGINE (FEATURE CODE 12UXJ OR 12UXH) AND WITH BOSCH ALTERNATOR FEATURE CODES 08GGN, 08GGR, 08GHG, OR 08GHH. THE ALTERNATOR CABLE MAY RUB ON THE HIGH PRESSURE POWER STEERING HOSE, POSSIBLY CHAFING ITS INSULATION AND CAUSING AN ELECTRICAL SHORT.

Mar 22, 2012 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012 INTERNATIONAL LONESTAR AND PROSTAR TRUCKS, MANUFACTURED FROM MARCH 24, 2011, THROUGH NOVEMBER 22, 2011, EQUIPPED WITH a FEATURE CODE 08VTS, 08JAU, OR 08JAW BATTERY BOX. THE MOUNTING BRACKETS USED TO INSTALL THE BATTERY BOX LOWER STEP WERE ASSEMBLED WITH TWO WELDS INSTEAD OF THREE WELDS AND MAY CAUSE THE STEP MOUNT TO BREAK OFF FROM THE BRACKET.

Feb 13, 2012 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012-2013 IC BUS CE-C, HC, AND INTERNATIONAL 9400 AND CERTAIN MODEL YEAR 2011 THROUGH 2013 INTERNATIONAL DURASTAR, PAYSTAR, WORKSTAR, TRANSTAR, LONESTAR, PROSTAR, 9200, AND 9800, AND CERTAIN MODEL YEAR 2013 INTERNATIONAL 9900, VEHICLES, MANUFACTURED FROM DECEMBER 2, 2010, THROUGH JANUARY 26, 2012, AND EQUIPPED WITH BENDIX ATR-6 TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKES CAUSING CONTINUOUS BRAKE APPLICATION.

Apr 19, 2011 – NAVISTAR IS RECALL CERTAIN MODEL YEAR 2011 AND 2012 INTERNATIONAL DURASTAR, PAYSTAR, WORKSTAR, TRANSTAR, LONESTAR AND PROSTAR COMMERCIAL TRUCKS MANUFACTURED FROM NOVEMBER 5, 2010, THROUGH MARCH 10, 2011, FOR FAILING TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 121, "AIR BRAKE SYSTEMS (ABS)." THE TRAILER ABS FAULT INDICATOR LAMP IN THE INSTRUMENT CLUSTER WILL NOT ILLUMINATE DUE TO A PROGRAMMING OR HARDWARE ISSUE WITH THE BRAKE SYSTEM ELECTRONIC CONTROL UNIT.

Sep 14, 2010 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 INTERNATIONAL LONESTAR HEAVY TRUCKS MANUFACTURED FROM JUNE 11, 2008 THROUGH JUNE 14, 2010, EQUIPPED WITH STYLED ALUMINUM WHEELS, FEATURE CODE 27DRS OR 27DRT. ON SOME VEHICLES, THE WHEELS MAY DEVELOP CRACKS IN THE SPOKES. THE CRACKS MAY PROGRESS OVER TIME TO THE POINT OF WHEEL FAILURE POSSIBLY RESULTING IN WHEEL SEPARATION FROM THE VEHICLE.

Aug 24, 2010 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2011 INTERNATIONAL PROSTAR AND LONESTAR HEAVY TRUCKS MANUFACTURED FROM JANUARY 2, 2007 THROUGH JUNE 1, 2010. THE PASSENGER SIDE WINDSHIELD WIPER LINKAGE ROD MAY SEPARATE FROM EITHER THE WIPER DRIVE ARM OR PASSENGER SIDE PIVOT ASSEMBLY.

Jun 14, 2010 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 INTERNATIONAL 4300M, 8600, LONESTAR AND PROSTAR BRAND TRUCKS MANUFACTURED FROM MAY 6, 2009 THROUGH MAY 25, 2010. THE FASTENER THAT CLAMPS THE PITMAN ARM TO THE STEERING GEAR SHAFT MAY HAVE BEEN UNDERTORQUED UPON ASSEMBLY. AN UNDER TORQUE CONDITION MAY CAUSE WEAR OF THE INTERCONNECTING SPLINES OF THE ARM AND THE SHAFT POSSIBLY ALLOWING THE PITMAN ARM TO SLIP OVER THE SHAFT RESULTING IN A REDUCTION OF STEERING CONTROL.

Mar 18, 2010 – NAVISTAR HAS NOTIFIED NHTSA OF A DEFECT ON CERTAIN MODEL YEAR 2008-2011 INTERNATIONAL TRUCKS EQUIPPED WITH AN OPTIONAL JUMP START STUD. CORROSION AT THE BASE OF THE STUD MAY CAUSE AN ELECTRICAL SHORT BETWEEN THE STUD AND BATTERY BOX.

Feb 03, 2010 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2009-2010 INTERNATIONAL PROSTAR AND LONESTAR TRUCKS EQUIPPED WITH FEATURE CODE 04AZT ROLL STABILITY CONTROL. THE AIR LINE THAT SUPPLIES THE TRACTION SOLENOID VALVE OF THE ROLL STABILITY CONTROL (RSC) SYSTEM MAY HAVE BEEN CONNECTED TO AN INCORRECT PORT ON THE AIR TANK. THIS CONDITION WILL AFFECT AIR MODULATION TO THE TRAILER BRAKES IF RSC IS ACTIVATED DURING A ROLL STABILITY EVENT. THIS CONDITION AT NO TIME AFFECTS THE NORMAL DESIGN FUNCTION OF THE TRACTOR AND TRAILER SERVICE BRAKES WHEN ACTIVATED BY THE DRIVER, OR THE FUNCTION OF THE TRACTOR RSC SYSTEM.