MACK PINNACLE (CHU) Recalls

Oct 13, 2015 – Mack Trucks, Inc. (Mack) is recalling certain model year 2011-2014 Pinnacle (CHU and CXU) trucks manufactured September 10, 2010, to June 17, 2013. The affected trucks are equipped with Fontaine Ultra LT Fifth Wheel connectors, which, due to cumulative damage to the fifth wheel and its locking mechanism, have a locking mechanism that may fail to operate or to properly engage.

Aug 17, 2015 – Mack Trucks, Inc. (Mack) is recalling certain model year 2013 and 2015 Titan (TD), model year 2014 and 2015 Pinnacle (CHU), and model years 2009-2010, 2012, and 2014-2016 Granite (GU) trucks. The chassis harness and air lines may not be properly clipped to the crossmember, which can allow the cables and air lines to fall and get twisted in the driveline.

Apr 18, 2014 – Mack Trucks Inc. (Mack) is recalling certain model year 2010-2014 CHU, CXU, and MRU, 2007 CT and CV, 2008-2014 GU, and 2011-2014 LEU, and TD trucks manufactured February 28, 2006, through November 8, 2013, and equipped Hamsar Electronic Flasher. The hazard warning lights may fail.

Feb 21, 2014 – Mack Trucks, Inc. (Mack) notified the agency on February 20, 2014, that they are recalling certain model year 2010-2012 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. While continuing to research the scope of the issue, Mack expanded the recall on November 18, 2014 to include certain model year 2008-2009 and 2013-2014 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. Having completed its investigation, Mack once again expanded the recall during February 2015 to include an additional 53,780 vehicles from model years 2007 and 2015. The recall now covers model year 2007-2015 includes CHU, CXU, GU and TD vehicles produced October 13, 2006, through October 3, 2014. In the affected vehicles, the Electronic Power Distribution Module (EPDM) may be contaminated from water leaks in, and around, the windshield. If exposed to water leaks, contaminants such as road salts may deposit on the EPDM.

Jul 02, 2012 – MACK IS RECALLING CERTAIN MODEL YEAR 2012 CHU, CXU, AND GU VEHICLES, MANUFACTURED FROM OCTOBER 10, 2011, THROUGH NOVEMBER 17, 2011. HARDWARE USED TO SECURE THE WINDSHIELD WIPER LINKAGE TO THE WIPER MOTOR MAY NOT BE SUFFICIENTLY TORQUED, AND MAY CAUSE THE WINDSHIELD WIPER LINKAGE TO DETACH FROM THE WIPER MOTOR. AS A RESULT, THE WINDSHIELD WIPERS WILL NOT FUNCTION.

Jul 21, 2011 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2010-2011 CHU, CXU AND GU HEAVY TRUCKS MANUFACTURED FROM JULY 12, 2010, THROUGH JULY 23, 2010 FOR A POTENTIALLY DEFECTIVE WELD ON THE SHAFT THAT THE CLUTCH PEDAL ATTACHES TO.

May 20, 2011 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2012, CHU, CXU, GU, MRU, LEU, AND TD TRUCKS EQUIPPED WITH A MERITOR DRIVELINE. THE TUBING USED TO ASSEMBLE THE AFFECTED DRIVELINES HAS A NONCONFORMING SEAM WELD WITH INSUFFICIENT BONDING OF THE MATERIAL.

May 03, 2011 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011-2012 CHU, CXU, GU, LEU AND MRU TRUCKS MANUFACTURED FROM OCTOBER 15, 2010, THROUGH JANUARY 31, 2011, AND EQUIPPED WITH GUNITE AUTOMATIC SLACK ADJUSTERS. DUE TO AN INCOMPLETE "KNITTING" OF THE IRON AT THE TIME OF CASTING, INADEQUATE STRUCTURAL INTEGRITY OF THE SLACK ADJUSTER HOUSING CAN OCCUR, WHICH COULD CAUSE THE HOUSING TO BREAK AT THE HANDLE UNDER NORMAL OPERATING LOADS.

Mar 31, 2011 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008-2011 CHU AND CXU HEAVY TRUCKS MANUFACTURED FROM JANUARY 2008 THROUGH JULY 2010. THERE MAY BE AN INTERFERENCE WITH THE BOLTS USED TO SECURE THE FIFTH WHEEL TO THE FRAME THAT CAN PREVENT THE BOLTS FROM BEING TORQUED TO SPECIFICATION.

Oct 27, 2010 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011 CHU AND CXU, HEAVY TRUCKS MANUFACTURED FROM JULY 13, 2010, THROUGH AUGUST 13, 2010, WITHOUT REAR MUD FLAP HANGER BRACKETS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THE REAR CONSPICUITY TREATMENT TYPICALLY FOUND ON THE MUD FLAP HANGER BRACKETS MAY NOT HAVE BEEN INSTALLED IN THE ALTERNATE POSITIONS AS ALLOWED IN THE REGULATION ON VEHICLES MANUFACTURED WITHOUT REAR MUD FLAP HANGER BRACKETS.