MACK Recalls

Mar 08, 2012 – MACK IS RECALLING CERTAIN MODEL YEAR 2010-2012 LEU AND MODEL YEAR 2011-2012 MRU VEHICLES, MANUFACTURED FROM MAY 14, 2009, THROUGH OCTOBER 31, 2011, AND BUILT TO OPERATE ON COMPRESSED NATURAL GAS. ON THESE VEHICLES THE ALTERNATOR GROUND CABLE RUNS DIRECTLY TO THE STARTER, WHICH DEFEATS THE CIRCUIT PROTECTION.

Feb 21, 2012 – MACK IS RECALLING CERTAIN MODEL YEAR 2009-2011 MRU AND MODEL YEAR 2010-2011 LEU VEHICLES, MANUFACTURED FROM JANUARY 1, 2009, THROUGH SEPTEMBER 30, 2010 BECAUSE THE FRONT AXLE MAY CRACK AND FRACTURE.

Feb 01, 2012 – MACK IS RECALLING CERTAIN MODEL YEAR 2012-2013 GU, MANUFACTURED FROM DECEMBER 2, 2010, THROUGH JANUARY 18, 2012, AND EQUIPPED WITH BENDIX ATR-6 TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKE CAUSING CONTINUOUS BRAKE APPLICATION.

Jan 20, 2012 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2002-2005 MR AND LE HEAVY TRUCKS, MANUFACTURED FROM FEBRUARY 1, 2002, THROUGH DECEMBER 22, 2004. OVER TIME, THE VEHICLE?S LOAD MAY RESULT IN FATIGUE CRACKS OF THE FRONT AXLE BEAM. THESE CRACKS CAN PROPAGATE AND RESULT IN COMPLETE FRACTURE OF THE AXLE BEAM.

Sep 01, 2011 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011-2012 CXU TRUCKS MANUFACTURED FROM MAY 1, 2010, THROUGH JANUARY 31, 2011. DURING THE COUPLING PROCESS, IT IS POSSIBLE FOR THE DRIVER TO PARTIALLY CLOSE THE FIFTH WHEEL LOCK AND IF SOLELY RELYING ON A TUG TEST (PULL TEST), THE DRIVER MAY THINK THAT THE FIFTH WHEEL LOCK IS PROPERLY COUPLED TO THE TRAILER KING PIN WHEN IN FACT IT IS NOT PROPERLY COUPLED.

Jul 21, 2011 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2010-2011 CHU, CXU AND GU HEAVY TRUCKS MANUFACTURED FROM JULY 12, 2010, THROUGH JULY 23, 2010 FOR A POTENTIALLY DEFECTIVE WELD ON THE SHAFT THAT THE CLUTCH PEDAL ATTACHES TO.

Jul 20, 2011 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2009-2012 MRU HEAVY TRUCKS MANUFACTURED FROM NOVEMBER 26, 2008, THROUGH APRIL 26, 2011. THE BOLTS USED TO MOUNT THE STEERING GEAR WERE NOT TIGHTENED TO SPECIFICATION. THE BOLTS CAN LOOSEN WHICH OVER TIME MAY CAUSE THE STEERING GEAR TO DISCONNECT FROM ITS MOUNTING BRACKET.

May 20, 2011 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2008-2011 GU HEAVY TRUCKS MANUFACTURED FROM SEPTEMBER 12, 2007, THROUGH APRIL 8, 2011, WITH A FOUR BATTERY CABLE DESIGN. AS A RESULT OF THE ROUTING AND CLIPPING USED, THE BATTERY CABLES MAY COME INTO CONTACT WITH FRAME HARDWARE, WHICH, AS A RESULT OF CHAFING, MAY CAUSE THE INSULATION TO BECOME WORN TO A POINT WHERE A SHORT OCCURS.

May 20, 2011 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2012, CHU, CXU, GU, MRU, LEU, AND TD TRUCKS EQUIPPED WITH A MERITOR DRIVELINE. THE TUBING USED TO ASSEMBLE THE AFFECTED DRIVELINES HAS A NONCONFORMING SEAM WELD WITH INSUFFICIENT BONDING OF THE MATERIAL.

May 03, 2011 – MACK TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011-2012 CHU, CXU, GU, LEU AND MRU TRUCKS MANUFACTURED FROM OCTOBER 15, 2010, THROUGH JANUARY 31, 2011, AND EQUIPPED WITH GUNITE AUTOMATIC SLACK ADJUSTERS. DUE TO AN INCOMPLETE "KNITTING" OF THE IRON AT THE TIME OF CASTING, INADEQUATE STRUCTURAL INTEGRITY OF THE SLACK ADJUSTER HOUSING CAN OCCUR, WHICH COULD CAUSE THE HOUSING TO BREAK AT THE HANDLE UNDER NORMAL OPERATING LOADS.