MERCEDES-BENZ M CLASS Recalls

Mar 31, 2011 – MERCEDES-BENZ IS RECALLING CERTAIN MODEL YEAR 1999-2002 M-CLASS AND MODEL YEAR 2000-2003 M-CLASS AMG VEHICLES. THE CRUISE CONTROL SYSTEM IN THE AFFECTED VEHICLES ALLOWS THE DRIVER TO DISENGAGE THE SYSTEM IN A NUMBER OF WAYS, INCLUDING TAPPING THE BRAKE PEDAL, USING THE CRUISE CONTROL STALK, OR BRAKING THE VEHICLE ENOUGH TO REACH A CERTAIN RATE OF DECELERATION. MERCEDES-BENZ HAS DETERMINED THAT UNDER CERTAIN CIRCUMSTANCES USE OF THE BRAKE PEDAL MAY NOT AUTOMATICALLY DISENGAGE CRUISE CONTROL AS EXPECTED BY THE DRIVER, ALTHOUGH THE OTHER MEANS OF DEACTIVATING CRUISE CONTROL REMAIN FULLY OPERATIVE. SPECIFICALLY, WHERE THE DRIVER PUMPS THE BRAKES RATHER THAN APPLYING CONSISTENT PEDAL FORCE, THE LEVEL OF FORCE REQUIRED MAY BE UNUSUALLY HIGH.

Dec 19, 2008 – MERCEDES-BENZ IS RECALLING 577 MY 2008 GL-CLASS, M-CLASS, AND R-CLASS VEHICLES. A DEFECT MAY EXIST IN THE DRIVING PIN USED TO CONTROL THE OIL PRESSURE OF THE POWER STEERING.

Sep 17, 2008 – MERCEDES-BENZ IS RECALLING 125,228 MY 1998-2004 M-CLASS VEHICLES. THE HOSE CLAMP USED TO SECURE THE POWER STEERING FLUID COOLING HOSE TO THE POWER STEERING FLUID COOLER MAY NOT PROVIDE SUFFICIENT CLAMPING FORCE FOR THIS CONNECTION.

Jul 07, 2008 – MERCEDES-BENZ IS RECALLING MY 2006-2008 M-CLASS, R-CLASS, MY 2005-2009 SLK-CLASS, MY 2005-2008 C-CLASS, MY 2003-2004 AND 2006-2008 CLK-CLASS, MY 2003-2008 E-CLASS, MY 2004 AND 2008 CL-CLASS, MY 2008 CLS-CLASS, MY 2004 AND 2007-2008 S-CLASS, MY 2003 G-CLASS, AND MY 2003-2004, 2006 AND 2009 SL-CLASS VEHICLES. A SOFTWARE CALIBRATION NUMBER (SCN) CODING RECEIVED ON THE AFFECTED VEHICLES DURING A RECENT WORKSHOP VISIT WAS INCORRECT. DEPENDING ON THE MODEL YEAR AND MODEL AFFECTED, THE RESULTS OF AN INCORRECT SCN CODING CAN AFFECT A NUMBER OF VEHICLE SAFETY AND EMISSION FUNCTIONS INCLUDING THE FOLLOWING TYPES OF FUNCTIONS: (1) THE FUEL GAUGE READINGS MAY BE INCORRECT; (2) A STUCK FUEL-LEVEL SENSOR MAY NOT BE DISPLAYED IN THE INSTRUMENT CLUSTER; (3) THE OBD SYSTEM MAY CAUSE THE CHECK ENGINE LIGHT TO ILLUMINATE INCORRECTLY; AND, (4) THE SPEEDOMETER MAY BE OUT OF TOLERANCE.

Mar 27, 2003 – ON CERTAIN PASSENGER VEHICLES, THE HOSE CLAMP USED TO SECURE THE POWER STEERING FLUID COOLING HOSE TO THE POWER STEERING FLUID COOLER MAY NOT PROVIDE SUFFICIENT CLAMPING FORCE FOR THIS CONNECTION.

Jul 26, 2002 – CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, S7.3, "OCCUPANT CRASH PROTECTION." THE SEAT BELT CHIMES MAY NOT FUNCTION AS DESIGNED AND IS NOT CONSISTENT WITH THE REQUIREMENTS OF THE STANDARD.

Feb 13, 2002 – CERTAIN PASSENGER VEHICLES EQUIPPED WITH DUNLOP SP5000 TIRES. SOME OF THESE TIRES HAVE A SEPARATION AROUND THE ENTIRE CIRCUMFERENCE IN THE AREA OF THE SIDE WALL AND TREAD.

Feb 27, 2001 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. CERTAIN ALL ACTIVITY MODULE II (AAM II) COULD HAVE A SUB-COMPONENT THAT COULD CAUSE THE MODULE TO INTERMITTENTLY NOT FUNCTION PROPERLY. THE AAM II CONTROLS A NUMBER OF SYSTEMS INCLUDING THE HIGH BEAM LIGHTS, INSTRUMENT CLUSTER, DOOR LOCKS, AND WIPER SYSTEMS.

Oct 30, 2000 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE SEAT BELT ANCHOR IN THE REAR FOLDING MIDDLE SEATING POSITION MAY HAVE BEEN MANUFACTURED WITH OUT-OF-TOLERANCE HARDWARE.

Jul 26, 2000 – VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES FAIL TO CONFORM TO THE REQUIREMENTS OF FMVSS NO. 208, "OCCUPANT CRASH PROTECTION." AN AUDIBLE SEAT BELT BUZZER WARNING SOUNDS FOR APPROXIMATELY TWO SECONDS WHEN THE VEHICLE IGNITION IS TURNED TO THE ON OR START POSITION AND THE DRIVER SEAT BELT IS FASTENED. THIS BUZZER ACTIVATION EXCEEDS THE LIMITATIONS SET FORTH IN THE STANDARD.