MERCEDES-BENZ S Recalls

Dec 29, 2010 – MERCEDES BENZ IS RECALLING CERTAIN MODEL YEAR 2007 AND 2010 2500 AND 3500 SPRINTER VEHICLES. THE CORRECT INTERIOR TRIM COVERING THE A-PILLARS MAY NOT HAVE BEEN INSTALLED. IF INCORRECT TRIM WAS INSTALLED ON A VEHICLE, THE VEHICLE WOULD FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT."

Dec 21, 2010 – SPRINTER IS RECALLING CERTAIN MODEL YEAR 2010-2011 FREIGHTLINER 2500 SPRINTER AND MERCEDES-BENZ SPRINTER VEHICLES EQUIPPED WITH AN EMERGENCY EXIT WINDOW. THE ADHESIVE BOND BETWEEN THE GLASS AND THE HINGE ON THE TOP OF THE WINDOW MAY LOOSEN.

Jun 29, 2010 – SPRINTER IS RECALLING CERTAIN MODEL YEAR 2009 AND 2010 VEHICLES MANUFACTURED FROM NOVEMBER 2009 THROUGH MARCH 2010 AND SOLD UNDER THE MERCEDES-BENZ, FREIGHTLINER, AND DODGE BRAND NAME. THE SPRING PLATE WHICH ATTACHES THE OIL FILLER NECK TO THE CYLINDER-HEAD COVER MAY CRACK.

Apr 07, 2009 – SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

Mar 13, 2009 – MERCEDES BENZ IS RECALLING 54 MY 2009 S-CLASS, W221 VEHICLES. DURING PRODUCTION THE FRONT AND REAR PASSENGER SIDE DOOR LOCKS MAY HAVE BEEN MISTAKENLY INTERCHANGED DURING PRODUCTION. THE EXCHANGE OF A FRONT AND A REAR PASSENGER SIDE DOOR LOCK WOULD RESULT IN A PASSENGER SIDE DOOR THAT CANNOT BE OPENED BY MERELY PULLING ON THE INTERIOR HANDLE AND A REAR DOOR LOCK THAT CAN BE OPENED WITH A SIMPLE PULL OF THE INTERIOR DOOR HANDLE EVEN IF LOCKED.

Nov 24, 2008 – MERCEDES-BENZ IS RECALLING 1,515 MY 2007 S-CLASS VEHICLES. THE RADIAL KNUCKLE OF THE FRONT STRUT MAY FAIL. THE RADIAL KNUCKLE FLAW MAY OCCUR AFTER SIGNIFICANT MILEAGE ACCUMULATION COMBINED WITH EXPOSURE TO HIGH CONTINUOUS STRESS BY DRIVING ON ROUGH ROADS.

Aug 14, 2008 – MERCEDES BENZ IS RECALLING 4,564 MY 2001-2006 CL-CLASS (MODEL 215), MY 2002-2006 S-CLASS (MODEL 220), MY 2003-2007 SL-CLASS (MODEL 230), MY 2007-2008 CL-CLASS (MODEL 216), AND MY 2007 S-CLASS (MODEL 221)PASSENGER VEHICLES EQUIPPED WITH ACTIVE BODY CONTROL (ABC) ACCELERATION SENSORS ON THE FRONT STRUTS. THESE SENSORS MEASURE ACCELERATION AROUND THE Z-AXIS OF THE VEHICLE AND ASSURE AN AUTOMATIC ADAPTATION OF THE FRONT STRUTS TO MAINTAIN A RELATIVELY LEVEL BODY POSITION. VARIATIONS IN THE SOLDERING PROCESS RESULTED IN SOLDERING POINTS ON THE BOARD OF THE ABC SENSORS WHICH MAY NOT BE WITHIN DESIGN TOLERANCES. SIGNALS FROM THE AFFECTED SENSORS MEASURING THE ACCELERATION MAY NOT BE ACCURATELY TRANSMITTED TO THE ENGINE CONTROL UNIT.

Jul 07, 2008 – MERCEDES-BENZ IS RECALLING MY 2006-2008 M-CLASS, R-CLASS, MY 2005-2009 SLK-CLASS, MY 2005-2008 C-CLASS, MY 2003-2004 AND 2006-2008 CLK-CLASS, MY 2003-2008 E-CLASS, MY 2004 AND 2008 CL-CLASS, MY 2008 CLS-CLASS, MY 2004 AND 2007-2008 S-CLASS, MY 2003 G-CLASS, AND MY 2003-2004, 2006 AND 2009 SL-CLASS VEHICLES. A SOFTWARE CALIBRATION NUMBER (SCN) CODING RECEIVED ON THE AFFECTED VEHICLES DURING A RECENT WORKSHOP VISIT WAS INCORRECT. DEPENDING ON THE MODEL YEAR AND MODEL AFFECTED, THE RESULTS OF AN INCORRECT SCN CODING CAN AFFECT A NUMBER OF VEHICLE SAFETY AND EMISSION FUNCTIONS INCLUDING THE FOLLOWING TYPES OF FUNCTIONS: (1) THE FUEL GAUGE READINGS MAY BE INCORRECT; (2) A STUCK FUEL-LEVEL SENSOR MAY NOT BE DISPLAYED IN THE INSTRUMENT CLUSTER; (3) THE OBD SYSTEM MAY CAUSE THE CHECK ENGINE LIGHT TO ILLUMINATE INCORRECTLY; AND, (4) THE SPEEDOMETER MAY BE OUT OF TOLERANCE.

Mar 19, 2008 – MERCEDES-BENZ IS RECALLING 3,283 MY 2008 S-CLASS AND CL-CLASS PASSENGER VEHICLES. A MALFUNCTION MAY OCCUR ON THE SIGNAL ACQUISITION AND ACTUATION MODULE-FRONT (SAM-F) TRANSISTORS. THE SAM-F IS A DOUBLE TRANSISTOR THAT HELPS CONTROL VEHICLE FUNCTIONS AND THE LIGHTING OF THE CENTER CONSOLE. INCORRECT STORAGE OF THE TRANSISTORS LED THE TRANSISTORS TO BE EXPOSED TO EXCESS HUMIDITY.

Dec 20, 2007 – ON CERTAIN PASSENGER VEHICLES, THE WINDSHIELDS WERE NOT INSTALLED CORRECTLY. EITHER THE PRIMER OR ACTIVATOR WAS MISSING AT THE TIME OF INSTALLATION.