SPARTAN ADVANTAGE Recalls

May 29, 2018 – Spartan Motors USA (Spartan) is recalling certain 2001-2018 Spartan Gladiator, Diamond, MetroStar, and Advantage emergency response vehicles. The affected vehicles may not be equipped with a pressure protection valve installed between the air reservoir and the lubrication control module. If the air line were to become disconnected between the lubrication control module and the air reservoir, a loss of air to the air brake system could occur. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."

Jul 15, 2015 – Spartan Motors, Inc. (Spartan) is recalling certain model year 2007-2015 Advantage, Diamond, Gladiator, and MetroStar emergency response vehicles manufactured January 18, 2007 to February 9, 2015. The front wheels of the affected vehicles have valve stems that may rub against the brake caliper.

Oct 06, 2014 – Spartan Motors, Inc. (Spartan) is recalling certain model year 2006-2013 Advantage, Diamond, Gladiator, and MetroStar emergency vehicles manufactured November 29, 2005, to June 19, 2013. In the affected vehicles, the transmission fluid cooler may fail, allowing the engine coolant to mix with the transmission fluid.

Dec 18, 2013 – Spartan Motors Chassis, Inc. (Spartan Chassis) is recalling certain model year 2006-2007 Diamond, model year 2006-2010 Gladiator, model year 2009-2010 Metrostar and one model year 2007 Advantage emergency response vehicles manufactured December 22, 2005, through October 13, 2010, and equipped with independent front suspensions (IFS) by Ridgewell Corporation. In the affected vehicles, welds on the IFS cradles may crack.

May 14, 2010 – SPARTAN IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2009 GLADIATOR, METROSTAR, ADVANTAGE, AND DIAMOND FIRE APPARATUS CHASSIS MANUFACTURED FROM JANUARY 1, 2007 THROUGH APRIL 15, 2010, EQUIPPED WITH INDEPENDENT FRONT SUSPENSIONS SUPPLIED BY RIDEWELL CORPORATION. BELL CRANK SUPPORT BRACKETS INSTALLED ON THE SUSPENSION CRADLE MAY CRACK, OR SEPARATE, FROM THE MAIN STRUCTURE (CRADLE ASSEMBLY). CERTAIN WELDS THAT ATTACH THE BELL CRANK SUPPORT BRACKETS MAY HAVE BEEN OMITTED DURING THE WELDMENT OPERATION OF THE SUSPENSION CRADLE.

Feb 05, 2010 – SPARTAN IS RECALLING CERTAIN MODEL YEAR 1998 THROUGH 2010 ADVANTAGE, BARRON, GLADIATOR, METROSTAR, MOUNTAIN STAR, AND TR-1 FIRE APPARATUS CHASSIS CABS MANUFACTURED BETWEEN FEBRUARY 27, 2003 AND NOVEMBER 17, 2009 AND BELTS SOLD TO VARIOUS VEHICLE ALTERS. CERTAIN SEAT BELT ANCHORAGES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES."

Sep 19, 2002 – ON CERTAIN MOTOR HOMES AND FIRE TRUCKS EQUIPPED WITH ELECTRONIC THROTTLE CONTROL/ACCELERATOR PEDALS SUPPLIED BY WILLIAMS CONTROLS INDUSTRIES, THE WELD ATTACHING THE CLEVIS TO THE PLATE HAS INSUFFICIENT PENETRATION AND COULD ALLOW THE CLEVIS TO SEPARATE FROM THE PLATE.

Apr 15, 2002 – ON CERTAIN MOTOR HOMES AND FIRE TRUCKS EQUIPPED WITH MERITOR WABCO PNEUMATIC ANITLOCK BRAKE SYSTEM (ABS) VALVE PACKAGES, THE ASSEMBLY BOLTS ON THESE VALVE PACKAGES WERE NOT TIGHTENED CORRECTLY.

May 12, 1999 – VEHICLE DESCRIPTION: FIRE TRUCKS. THESE FIRE TRUCKS ARE ALL 4-DOOR MODELS WHICH CONTAIN DUAL, FORWARD FACING PASSENGER SEATS. THE HARDWARE UTILIZED TO MOUNT THE SEAT BOX TO THE CAB FLOOR AND TO THE BACKWALL STRUCTURE, AND ALSO TO MOUNT THE TYPE 1 SEAT BELT SYSTEMS, WAS INADEQUATE TO MEET THE REQUIREMENTS OF FMVSS NOS. 207/210, ""SEATING SYSTEMS" AND "SEAT BELT ASSEMBLY ANCHORAGES."

Jan 20, 1999 – VEHICLE DESCRIPTION: FIRE TRUCKS. THE CAB TILT SYSTEM CONTAINS A 12 VOLT ELECTRICAL SOLENOID ASSEMBLY AS AN ACCESSORY TO THE CAB TILT ELECTRIC MOTOR/HYDRAULIC PUMP ASSEMBLY. RAIN, SNOW, SALT SPRAY OR OTHER CORROSIVE ENVIRONMENT CAN CORRODE THE SOLENOID OR "BRIDGE" THE ENERGIZING COIL WIRE TERMINAL CAUSING THE CAB TILT SYSTEM TO OPERATE UNCONTROLLABLY.