SPARTAN K3 Recalls

Oct 17, 2011 – SPARTAN IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 INCOMPLETE RECREATIONAL VEHICLE CHASSIS MANUFACTURED FROM JANUARY 4, 2010, THROUGH JANUARY 26, 2011, EQUIPPED WITH AN ELECTRONIC CONTROL MODULE, PART NUMBER 2791-NN2E-001 OR 2791-NN2E-002. WHEN THE BRAKE IS APPLIED, THE CRUISE CONTROL MAY NOT CANCEL. ADDITIONALLY, THESE VEHICLES MAY EXHIBIT AN INADVERTENT, MODERATE INCREASE IN VEHICLE SPEED UNTIL THE VEHICLES REACHES ITS GOVERNED SPEED AFTER THE VEHICLE'S CRUISE CONTROL IS SET.

Aug 17, 2011 – SPARTAN IS RECALLING CERTAIN MODEL YEAR 2010, 2011, AND 2012 RECREATIONAL VEHICLES, MODELS MM, K2, K3, BUS, FURION, GLADIATOR, AND METRO STAR, MANUFACTURED FROM SEPTEMBER 29, 2010, THROUGH JUNE 20, 2011, EQUIPPED WITH A CUMMINS ISB, ISC, ISL, OR ISX DIESEL ENGINE. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.

Aug 11, 2011 – Spartan Motors Chassis, Inc. (Spartan Chassis) is recalling certain 2011 SU and 2011 through 2012 model year MM, K2, and K3 recreational vehicle chassis manufactured from January 28, 2011, through June 28, 2011, equipped with air gauges supplied by Ametek. An incorrect value may have been used in the formula for calculating the sweep angle of the dial. This may have resulted in the accuracy of the gauge varying as much as eleven percent from the cutout pressure as opposed to the maximum allowable of +/- seven percent. Consequently, these chassis fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 121, "Air Brake Systems."

Dec 16, 2009 – SPARTAN IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 MM, K2, AND K3 MOTORHOME CHASSIS MANUFACTURED FROM APRIL 27, 2007 AND AUGUST 11, 2009, EQUIPPED WITH PNEUMATIC AND HYDRAULIC ADJUSTABLE BRAKE PEDAL ASSEMBLIES P/NOS. 6562618, 6565118, 77025-001, 77025-002, 77025-501, 77050-004, SUPPLIED BY KONGSBERG AUTOMOTIVE. SOME ASSEMBLIES COULD CONTAIN A DRIVE PIN THAT IS BELOW SPECIFICATION AND MAY BECOME DISENGAGED FROM THE BRAKE ARM CAUSING SEPARATION OR LOOSENING OF THE PEDAL FROM THE REMAINDER OF THE ASSEMBLY.

Nov 30, 2009 – SPARTAN IS RECALLING 14 MODEL YEAR 2005 AND 2006 MOTORHOMES MANUFACTURED BETWEEN NOVEMBER 12, 2004 AND MARCH 1, 2006, EQUIPPED WITH CATERPILLAR C15 ENGINE. THE VARIABLE VALVE ACTUATION OIL LINE MAY RUB AGAINST THE P-CLIPS RETAINING THE OIL LINE, CAUSING AN OIL LEAK.

May 28, 2009 – SPARTAN IS RECALLING 484 MODEL YEARS 2008-2010 ADV, BEY, FUR, GLC, GLD, K2, K3, MG, MM, MTR, AND NVS FIRE TRUCK, AMBULANCE, AND MOTOR HOME CHASSIS MANUFACTURED BETWEEN JULY 1 AND DECEMBER 16, 2008 EQUIPPED WITH CERTAIN HALDEX QUICK RELEASE VALVES (QRV). THE RUBBER DIAPHRAGM INSIDE THE QRV MAY EXPERIENCE DELAMINATION RESULTING IN SIGNIFICANT LEVELS OF AIR PRESSURE LEAKAGE PAST AND/OR THROUGH THE DIAPHRAGM, OR THE DEVELOPMENT OF A BUBBLE IN THE DIAPHRAGM WHICH MAY TRAP AIR PRESSURE IN THE VALVE AND NOT ALLOW THE SERVICE BRAKES TO RELEASE.

Jun 20, 2008 – SPARTAN CHASSIS IS RECALLING 213 MY 2007-2008 MM, AND MY 2008 K2, K3, AND SU MOTOR HOME CHASSIS. CERTAIN CHASSIS FASTENERS MAY FRACTURE RESULTING IN POOR HANDLING OF THE VEHICLE, LOSS OF STEERING, AND/OR REDUCED LEVEL OF SUSPENSION PERFORMANCE.

Jul 13, 2007 – ON CERTAIN MOTOR HOMES AND FIRE TRUCKS, THE STEERING GEAR ASSEMBLY CONTAINS A SPACER WITH INCORRECT DIMENSIONS. A SPACER OF INSUFFICIENT HEIGHT ALLOWS FOR EXCESSIVE PLAY IN THE RETURN FUNCTION OF THE RECIRCULATION BALLS AND, AS A CONSEQUENCE, THERE IS A FAILURE IN THE CIRCULATORY FUNCTION OF THESE BALLS.

Oct 31, 2006 – ON CERTAIN MOTOR HOME CHASSIS EQUIPPED WITH A CATERPILLAR C15 ENGINE IN A FLEETWOOD HERITAGE MOTOR HOME, THE VARIABLE VALVE ACTUATION (VVA) OIL LINE MAY WEAR CAUSING AN OIL LEAK.

Mar 31, 2006 – ON CERTAIN MOTOR HOMES, THE BUSSMAN BOX WAS INCORRECTLY SOLDERED AND COULD FAIL.