STARTRANS Recalls

Dec 02, 2011 – STARTRANS IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 MFSAB SCHOOL BUSES MANUFACTURED FROM APRIL 14, 2010, THROUGH JUNE 7, 2011, EQUIPPED WITH C. E. WHITE SELF-LATCHING SEAT CUSHIONS. THE SELF-LATCHING MECHANISM USED TO RETAIN THE SEAT CUSHION TO THE FRAME MAY NOT ACTIVATE. ACCORDINGLY, THESE SEATS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 222, "SCHOOL BUS PASSENGER SEATING AND CRASH PROTECTION."

Nov 09, 2011 – STARTRANS IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2011 MODEL MFSAB SCHOOL ACTIVITY BUSES. THE REAR DOOR EMERGENCY EXIT IS PARTIALLY BLOCKED BY THE BUS SEATS. ACCORDINGLY, THESE BUSES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 217, "BUS EMERGENCY EXITS AND WINDOW RETENTION AND RELEASE."

Oct 03, 2011 – CERTAIN MODEL YEAR 2007 THROUGH 2011 STARTRANS MFSAB SCHOOL ACTIVITY BUSES WERE PRODUCED WITHOUT THE REQUIRED DECAL ON THE REAR VIEW MIRROR WHICH WARNS THE BUS OPERATOR TO USE THE CROSS VIEW MIRRORS WHILE THE BUS IS STOPPED AND NOT TO USE THE CROSS VIEW MIRRORS WHILE THE BUS IS MOVING. ACCORDINGLY, THE BUSES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 111, "REARVIEW MIRRORS."

Apr 11, 2011 – STARTRANS IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2010 MFSAB SCHOOL BUSES EQUIPPED WITH CARRIER GENV EM-1 EVAPORATOR UNITS. DUE TO TIME, TEMPERATURE, AND/OR VIBRATION, THE FUSE MAY LOOSEN IN THE FUSE HOLDER RESULTING IN HIGH RESISTANCE AND ARCING.

Apr 11, 2011 – STARTRANS IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2010 TRANSIT BUSES EQUIPPED WITH CARRIER GENV EM-1 EVAPORATOR UNITS. DUE TO TIME, TEMPERATURE, AND/OR VIBRATION, THE FUSE MAY LOOSEN IN THE FUSE HOLDER RESULTING IN HIGH RESISTANCE AND ARCING.

Nov 15, 2010 – STARTRANS IS RECALLING CERTAIN MODEL YEAR 2003-2007 MFSAB SCHOOL ACTIVITY BUSES EQUIPPED WITH TRANS/AIR TA73 EVAPORATORS. THE EVAPORATOR UTILIZES A POWER RESISTOR TO REGULATE BLOWER SPEED. SHOULD A SHORT OCCUR IN THE "LOW OR MEDIUM SPEED" CIRCUIT WHILE THE BLOWER IS IN HIGH SPEED, THE SHORT WILL CAUSE THE SUPPLY VOLTAGE TO FEEDBACK THROUGH THE RESISTOR TO GROUND, NOT DRAWING ENOUGH CURRENT TO TRIP THE FUSE.

Nov 15, 2010 – STARTRANS IS RECALLING CERTAIN MODEL YEAR 2006 AND 2007 CANDIDATE, CANDIDATE II, SENATOR HD, TROLLEY, PRESIDENT, SENATOR, AND SENATOR II TRANSIT BUSES EQUIPPED WITH TRANS/AIR TA73 EVAPORATORS. THE EVAPORATOR UTILIZES A POWER RESISTOR TO REGULATE BLOWER SPEED. SHOULD A SHORT OCCUR IN THE "LOW OR MEDIUM SPEED" CIRCUIT WHILE THE BLOWER IS IN HIGH SPEED, THE SHORT WILL CAUSE THE SUPPLY VOLTAGE TO FEEDBACK THROUGH THE RESISTOR TO GROUND, NOT DRAWING ENOUGH CURRENT TO TRIP THE FUSE.

May 21, 2010 – STARTRANS IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 MFSAB MODEL SCHOOL BUSES MANUFACTURED FROM JANUARY 2008 THROUGH APRIL 9, 2010, EQUIPPED WITH FREEDMAN SEAT BARRIERS, P/NOS. 38764 AND 15198. THE BARRIER FOR LEG PROTECTION WAS BUILT USING THE WRONG GAUGE OF MATERIAL AND FAILS TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 222, "SCHOOL BUS PASSENGER SEATING AND CRASH PROTECTION."

May 10, 2010 – STARTRANS BUS IS RECALLING CERTAIN MODEL YEAR 2009 CANDIDATE, CANDIDATE II, SENATOR, SENATOR HD, PRESIDENT, TROLLEY, AND SENATOR II TRANSIT BUSES MANUFACTURED FROM SEPTEMBER 2007 THROUGH DECEMBER 18, 2009, AND FITTED WITH CERTAIN RICON S SERIES AND K SERIES L-MODEL WHEELCHAIR LIFTS. DUE TO A PROBLEM IN THE SOFTWARE THAT CONTROLS THE LIFT'S "UP" FUNCTION, SHOULD THE "UP" BUTTON BE RELEASED BEFORE THE FLOOR LEVEL LIMIT SWITCH IS ACTIVATED, THE LIFT MAY CONTINUE ITS UPWARD TRAVEL AND MAY OVERRUN THE FLOOR LEVEL CUT OFF POINT.

May 10, 2010 – STARTRANS BUS IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2010 CANDIDATE, CANDIDATE II, SENATOR, SENATOR HD, PRESIDENT, TROLLEY, SENATOR II, AND SENTINAL TRANSIT BUSES MANUFACTURED FROM DECEMBER 2007 THROUGH DECEMBER 18, 2009 AND FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.