PRO COMPETITION PRO COMP XTREME A-T Recalls - View the latest PRO COMPETITION PRO COMP XTREME A-T Recalls
|
Auto Recalls For Consumers
|
by PRO COMPETITION TIRE COMPANY
PRO COMPETITION PRO COMP XTREME A-T TIRE RECALLS - (5 Records Found)
Using tires that have been recalled could potentially be disasterous. But keep in mind, a recall could be for something as simple as a mis-print on the sidewall.
You should find your specific tire brand, model and/or size of your tire to be sure it is safe to use.
Find your tire listed below. Results are sorted by tire size and/or model & defect. Select your desired tire to view the complete details.
Information provided by the National Highway Traffic Safety Administration.
| View PRO COMPETITION Tire Recalls Below ↓ |
|
|
| |
|
Problem: CERTAIN PRO COMPETITION PRO COMP XTREME A/T TIRES, SIZE 38.5X14.50R20LT, MANUFACTURED BETWEEN FEBRUARY 1, 2004, AND JANUARY 21, 2006. THESE TIRES MAY NOT HAVE ADEQUATE RUBBER COVERAGE OF THE BELT EDGE DUE TO LOW TREAD GAUGE IN THE SHOULDER SLOT AREA OF THE TIRE. WHEN THIS CONDITION EXISTS, IT MAY EVENTUALLY CAUSE CRACKING AT THE BASE OF THE SHOULDER SLOTS RESULTING IN EXPOSED BELT WIRE WHICH COULD LEAD TO ACCELERATED BELT DEGRADATION, WHICH COULD RESULT IN A SEPARATION. IF THE SEPARATION IS NOT DETECTED, CONTINUED USE MAY CAUSE THE PLY CORDS TO BREAK AND THE TUBELESS LINER TO TEAR AND LOSE THE INFLATING AIR. Recall Details - 3/14/2006
Problem: CERTAIN PRO COMP TIRE MODELS LISTED ABOVE MANUFACTURED BETWEEN AUGUST 6 AND AUGUST 19, 2006 (DOT SERIAL WEEKS 3206 AND 3306.) SOME OF THE SUBJECT TIRES MAY HAVE BEEN PRODUCED WITH NON-CONFORMING BELT WIRE COAT STOCK. IF PLACED IN SERVICE, THE SUBJECT TIRES MAY DEVELOP A BELT SEPARATION DUE TO A REDUCED ABILITY TO PREVENT CORROSION OF THE STEEL WIRES IN AN INSTANCE WHERE MOISTURE REACHES THE STEEL BELT. Recall Details - 10/26/2006
Problem: CERTAIN PRO COMP TIRE MODELS LISTED ABOVE MANUFACTURED BETWEEN AUGUST 6 AND AUGUST 19, 2006 (DOT SERIAL WEEKS 3206 AND 3306.) SOME OF THE SUBJECT TIRES MAY HAVE BEEN PRODUCED WITH NON-CONFORMING BELT WIRE COAT STOCK. IF PLACED IN SERVICE, THE SUBJECT TIRES MAY DEVELOP A BELT SEPARATION DUE TO A REDUCED ABILITY TO PREVENT CORROSION OF THE STEEL WIRES IN AN INSTANCE WHERE MOISTURE REACHES THE STEEL BELT. Recall Details - 10/26/2006
Problem: CERTAIN PRO COMP TIRE MODELS LISTED ABOVE MANUFACTURED BETWEEN AUGUST 6 AND AUGUST 19, 2006 (DOT SERIAL WEEKS 3206 AND 3306.) SOME OF THE SUBJECT TIRES MAY HAVE BEEN PRODUCED WITH NON-CONFORMING BELT WIRE COAT STOCK. IF PLACED IN SERVICE, THE SUBJECT TIRES MAY DEVELOP A BELT SEPARATION DUE TO A REDUCED ABILITY TO PREVENT CORROSION OF THE STEEL WIRES IN AN INSTANCE WHERE MOISTURE REACHES THE STEEL BELT. Recall Details - 10/26/2006
Problem: CERTAIN PRO COMP TIRE MODELS LISTED ABOVE MANUFACTURED BETWEEN AUGUST 6 AND AUGUST 19, 2006 (DOT SERIAL WEEKS 3206 AND 3306.) SOME OF THE SUBJECT TIRES MAY HAVE BEEN PRODUCED WITH NON-CONFORMING BELT WIRE COAT STOCK. IF PLACED IN SERVICE, THE SUBJECT TIRES MAY DEVELOP A BELT SEPARATION DUE TO A REDUCED ABILITY TO PREVENT CORROSION OF THE STEEL WIRES IN AN INSTANCE WHERE MOISTURE REACHES THE STEEL BELT. Recall Details - 10/26/2006
|