RENAULT 18I RECALLS - (8 Recalls Found)
Since 1966, RENAULT has issued a total of 72 car recalls worldwide. Of those recalls, 8 have been for the RENAULT 18I starting in 1980. This accounts for less than 1.0% of the 58048 car recalls issued by the NHTSA since 1966. The 18I accounts for about 11.1% of all the RENAULT recalls issued since 1966. Compared to other car manufacturers, RENAULT ranks #49 in overall number of recalls issued by a car maker.
Please keep in mind these numbers are for statistical purposes only & do not necessarily reflect the quality of the RENAULT 18I or RENAULT itself. These figures are based only on the number of recalls issued and NOT the total number of vehicles affected by a particular recall.
Find your RENAULT 18I listed below. Results are sorted year from newest to oldest. Select the desired RENAULT 18I to view the complete recall details.
Information provided by the National Highway Traffic Safety Administration.
| View RENAULT 18I Recalls Below ↓ |
|
1985 Recalls ↓
Problem: THE 12 MM SPACER USED ON THE REAR SEAT BELT ANCHORAGE BOLTS MAY AFFECT ANCHOR BOLT LOAD CAPACITY AND FAIL TO COMPLY WITH FMVSS 210, SEAT BELT ASSEMBLY ANCHORAGES. CONSEQUENCE OF DEFECT: THE REAR OUTBOARD SEAT BELT ANCHORAGES MAY NOT MAINTAIN LOAD REQUIREMENTS FOR THE SPECIFIED TIME. THIS FAILURE MAY CAUSE THE SEAT BELT SYSTEM NOT TO RESTRAIN THE OCCUPANT IN POSITION IF AN ACCIDENT WERE TO OCCUR, CAUSING SERIOUS INJURIES. Recall Details - 4/12/1985
1984 Recalls ↓
Problem: THE 12 MM SPACER USED ON THE REAR SEAT BELT ANCHORAGE BOLTS MAY AFFECT ANCHOR BOLT LOAD CAPACITY AND FAIL TO COMPLY WITH FMVSS 210, SEAT BELT ASSEMBLY ANCHORAGES. CONSEQUENCE OF DEFECT: THE REAR OUTBOARD SEAT BELT ANCHORAGES MAY NOT MAINTAIN LOAD REQUIREMENTS FOR THE SPECIFIED TIME. THIS FAILURE MAY CAUSE THE SEAT BELT SYSTEM NOT TO RESTRAIN THE OCCUPANT IN POSITION IF AN ACCIDENT WERE TO OCCUR, CAUSING SERIOUS INJURIES. Recall Details - 4/12/1985
1983 Recalls ↓
Problem: THE 12 MM SPACER USED ON THE REAR SEAT BELT ANCHORAGE BOLTS MAY AFFECT ANCHOR BOLT LOAD CAPACITY AND FAIL TO COMPLY WITH FMVSS 210, SEAT BELT ASSEMBLY ANCHORAGES. CONSEQUENCE OF DEFECT: THE REAR OUTBOARD SEAT BELT ANCHORAGES MAY NOT MAINTAIN LOAD REQUIREMENTS FOR THE SPECIFIED TIME. THIS FAILURE MAY CAUSE THE SEAT BELT SYSTEM NOT TO RESTRAIN THE OCCUPANT IN POSITION IF AN ACCIDENT WERE TO OCCUR, CAUSING SERIOUS INJURIES. Recall Details - 4/12/1985
1981 Recalls ↓
Problem: ON CERTAIN VEHICLES, THE WIRING HARNESS FOR THE AIR CONDITIONER MAY PROVIDE POWER TO THE IGNITION CIRCUIT WHILE THE KEY IS IN THE OFF POSITION. Recall Details - 9/19/1980
Problem: ON CERTAIN VEHICLES, THE CRUISE CONTROL ACTUATION CHAIN COULD CATCH ON CERTAIN CARBURETOR HARDWARE, CAUSING THE THROTTLE PLATE TO REMAIN IN A PARTIALLY OPEN POSITION. Recall Details - 9/19/1980
Problem: VEHICLES MAY HAVE BEEN ASSEMBLED WITH A RESTRICTED FUEL SUPPLY SYSTEM THAT DOES NOT FUNCTION PROPERLY. THE ENGINE MAY STOP UNEXPECTEDLY, EVEN THOUGH THE FUEL GAUGE INDICATES FUEL IS AVAILABLE. Recall Details - 12/2/1981
Problem: SOME OF THE INVOLVED VEHICLES MAY DEVELOP A FUEL LEAK NEAR THE ENGINE DUE TO A LOOSE FUEL LINE CONNECTION. Recall Details - 8/28/1981
Problem: ON CERTAIN VEHICLES, THE WIRING SYSTEM IN THE ENGINE COMPARTMENT MAY HAVE BEEN IMPROPERLY ROUTED. IF SO, THE WIRES MAY COME IN CONTACT WITH SOME OF THE ENGINE COMPARTMENT COMPONENTS. Recall Details - 9/12/1983
|