FORD E-350 Recalls

Mar 04, 2014 – Landi Renzo USA is recalling certain model year 2011-2014 Ford E-150, E-250, and E-350 vehicles modified January 2, 2011, through February 24, 2014 to operate on compressed natural gas (CNG). In the affected vehicles, the left and right rear brackets that support the rear CNG cylinder may fail, allowing the cylinder to dislodge from the vehicle.

Jun 21, 2013 – Mobility Works is recalling certain model year 2006-2012 Ford E-150, E-250 and E-350 vehicles manufactured August 2006 through August 2012. The vehicles are equipped with certain Ricon S series and K Series wheelchair lifts with an optional armored pendant cable. The armored cable may be positioned such that it does not clear the wheelchair lift.

Jun 29, 2012 – PRIME-TIME SPECIALTY VEHICLES (PRIME-TIME) IS RECALLING ONE MODEL YEAR 2010 FORD E350 SUPER VAN EQUIPPED WITH A BRAUN CENTURY-2 WHEELCHAIR LIFT. OVER TIME AND WITH FREQUENT USE, THE ROLL STOP LATCHES ON THE OUTER BARRIER MAY BECOME BENT OR MISALIGNED.

Nov 08, 2011 – FORD IS RECALLING CERTAIN REPLACEMENT FUEL TANKS THAT COULD BE INSTALLED INTO MODEL YEAR 2004 THROUGH 2008 E-150, E-250, AND E-350 VANS AND WAGONS. THE AFFECTED FUEL TANKS HAVE AN EXTRA OBDII SENSOR HOLE ON THE TOP OF THE TANK THAT MAY NOT BE PROPERLY SEALED AND MAY LEAK FUEL.

Aug 31, 2011 – ROUSH IS RECALLING CERTAIN AFTERMARKET ROUSH CLEAN TECH LIQUID PROPANE AUTOGAS FUEL SYSTEM KITS USED FOR INSTALLATION ON THE FOLLOWING VEHICLES: MODEL YEAR 2007 AND 2008 FORD E-350 (DUEL REAR WHEEL), MY 2009-2011 FORD E- 150, E-250, AND E-350, AND MY 2009-2011 FORD E-450 CUTAWAYS. THE FUEL RAILS INCLUDED IN THE KITS CONTAIN IMPROPERLY SEATED INJECTOR RETENTION CLIPS. THIS COULD RESULT IN LEAKAGE OF PROPANE AUTOGAS. THE PART NUMBERS OF THE AFFECTED KITS ARE: P07C2-176KIT-AB, P10C2-RCOMMKIT-AB, P10C2-R150KIT-AA, P10C2-R150KIT-AC, P10C2-R350KIT-AC, P11C2-R150KIT-AA, P11C2-R150KIT-AB, P11C2-R350KIT-AA, P11C2-R350KIT-AB, P10-SO-RKIT-BA, PBC2-RKIT158-AB, PBC2-RKIT176-AB, AND PBC2-RKITMB-AC.

Aug 31, 2011 – ROUSH IS RECALLING CERTAIN MODEL YEAR 2009-2011 FORD E-150, E-250, AND E-350 5.4L ENGIN VANS/WAGONS/CUTAWAYS, AND MODEL YEAR 2010-2011 FORD E-450 6.8L ENGINE CUTAWAY VEHICLES ALTERED BY ROUCH TO OPERATE USING THE ROUSH BRANDED CLEANTECH PROPANE AUTOGAS FUEL SYSTEM. THE FUEL RAILS INCLUDED IN THE KITS CONTAIN IMPROPERLY SEATED INJECTOR RETENTION CLIPS. THIS COULD RESULT IN LEAKAGE OF PROPANE AUTOGAS.

Aug 26, 2011 – Ford Motor Company (Ford) is recalling certain model year 2011 Ford E-150, E-250, E-350, and E-450 vehicles built from May 12, 2011, through May 26, 2011. Due to improper manufacturing conditions, some of the windshields may form bubbles after an extended time in hot temperatures. As such, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 205, "Glazing Materials."

Aug 01, 2011 – FRONTLINE IS RECALLING CERTAIN MODEL YEAR 2006-2011 ELECTRONIC NEWS GATHERING (ENG) VEHICLES BUILT ON A FORD E-350 CHASSIS WITH AN AFTERMARKET REAR ANTI-SWAY BAR AND MANUFACTURED FROM OCTOBER 31, 2006, THROUGH JULY 12, 2011. THESE VEHICLES MAY BE SUSCEPTIBLE TO REAR HYDRAULIC BRAKE LINE DAMAGE. THE REAR ANTI-SWAY BAR FRAME MOUNTING BOLT THREADS MAY COME IN CONTACT WITH THE STEEL HYDRAULIC BRAKE LINE. IF METAL-TO-METAL ABRASION OCCURS, THE BRAKE LINE MAY EVENTUALLY RUPTURE AND CAUSE A LOSS OF HYDRAULIC SERVICE BRAKE PRESSURE.

May 31, 2011 – ROUSH PERFORMANCE PRODUCTS IS RECALLING CERTAIN 2011 FORD E-SERIES VANS EQUIPPED WITH 5.4 OR 6.8 LITER ENGINES THAT HAVE BEEN ALTERED BY ROUSH TO OPERATE USING THE ROUSH LIQUID PROPANE AUTOGAS FUEL SYSTEM. A VALVE IN THE SYSTEM MAY HAVE BEEN MISMACHINED ALLOWING A PROPANE LEAK.

May 31, 2011 – ROUSH IS RECALLING CERTAIN AFTERMARKET ROUSH CLEAN TECH LIQUID PROPANE AUTOGAS FUEL SYSTEM KITS PRODUCED BETWEEN DECEMBER 17, 2010, AND MAY 6, 2011, USED FOR INSTALLATION ON FLEET VEHICLES MODEL YEAR 2009 THROUGH 2011 FORD E-SERIES VANS/WAGONS/SHUTTLES/CUTAWAY (150, 250 AND 350) WITH 5.4L ENGINES ("E-SERIES"), AND MY 2011 FORD E-450 CUTAWAYS. THE VALVES INSTALLED IN THE SERVICE PORT OF THE FUEL RAILS OF THE KIT WERE UNDER MINIMUM SPECIFICATION FOR THE DIAMETER. THIS LED TO INSUFFICIENT COMPRESSION OF THE O-RING, ALLOWING LEAKAGE OF PROPANE AUTOGAS. THE PART NUMBERS OF THE AFFECTED KITS ARE: P10C2-R150KIT-AA, P10C2-R150KIT-AC, P10C2-R350KIT-AC, P11C2-R150KIT-AA, P11C2-R150KIT-AB, P11C2-R350KIT-AA, P11C2-R350KIT-AB, P-10-SO-RKIT-BA, PBC2-RKIT158-AB, PBC2-RKIT176-AB, AND PBC2-RKITMB-AC.