INTERNATIONAL Recalls

Mar 07, 2014 – Navistar, Inc. is recalling certain model year 2014 International Prostar trucks manufactured September 2013 through December 2013, and equipped with feature code 14GXP 6X2 rear axles with 'R' hubs and Dual Track rear axles. In the affected vehicles, axle shafts of an incorrect length may have been installed which can cause the splines on the axles shafts to be only partially engaged into the side gears of the rear axle differential.

Feb 20, 2014 – Navistar Inc., is recalling certain model year 2012-2013 International Lonestar, Paystar, Prostar, Workstar and 9900 trucks, equipped with feature code 0504501, 0504504, or 04EWM Reduced Stopping Distance (RSD) brake linings and with or without feature code 04WCS Greased For Life front air S-cam brakes. In the affected vehicles, the brake S-cam brackets may fracture.

Feb 19, 2014 – Navistar, Inc. (Navistar) is recalling certain model year 2014 and 2015 International Durastar trucks manufactured January 11, 2014, through January 23, 2014, and equipped with steering feature codes 05PRG, 05PRR, 05PRU, 05PRV or 05PSM. The bolts used to mount the steering gear to the frame may fail, resulting in either looseness of steering or the loss of steering.

Feb 19, 2014 – Navistar, Inc. (Navistar) is recalling certain model year 2011-2014 International DuraStar Trucks and 2012-2014 International TerraStar trucks intended for emergency vehicle operations manufactured from February 25, 2010, through February 18, 2013, and equipped with 2010 MaxxForce 7 V8 diesel engines. In the affected vehicles, the Engine Warning Protection Shutdown (EWPS) was inadvertently re-enabled when the Engine Control Module (ECM) was recalibrated.

Feb 07, 2014 – Navistar Inc. (Navistar) is recalling certain model year 2010-2011 IC bus 3200, model year 2012 and 2014 IC bus CE and model year 2011-2013 IC bus HC transit buses and model year 2008-2013 International 4300 and model year 2013 International Workstar commercial trucks equipped with Eaton hybrid automated transmissions. The software controlling the affected transmissions may improperly raise the vehicle's engine speed during downshifts without the driver's input.

Feb 04, 2014 – Kaffenbarger Truck Equipment Company (Kaffenbarger) is recalling certain model year 2006-2013 International class 8 trucks equipped with Sure Power-brand DC-DC converters containing a particular epoxy sealing, aka 'potting', compound. The specific potting compound used in the subject products for insulation was found to be capable of conducting electricity after being exposed to heat.

Nov 20, 2013 – Navistar, Inc. is recalling certain model year 2013-2014 International ProStar sleeper cab vehicles manufactured December 12, 2012, through August 8, 2013 and equipped with feature code 16XSA, 16XSB, 16XSC or 16XSD chassis skirts. In the affected vehicles, the rear chassis skirt upper horizontal support S-bracket may rub the fuel tank causing a hole in the tank.

Sep 18, 2013 – Navistar, Inc. is recalling certain model year 2008-2013 International LoneStar, ProStar, and TranStar trucks manufactured February 20, 2008, through July 29, 2013 and equipped with an electronic fifth wheel jaw release system (feature code 0595BAW or 0595BAY). Due to an assembly error, the air lines at the isolation/vent valve may not be oriented correctly.

Jul 10, 2013 – Matthews Specialty Vehicles is recalling one model year 2013 Freightliner XCR bus manufactured June 27, 2013; and one model year 2000 Thomas Built FE bus manufactured April 15, 2013; and model year 2013 International TerraStar buses manufactured June 12, 2013; and one model year 2011 Thomas Built CHSU/Mickey bus manufactured April 24, 2013. Due to a design change in the power awning motor assembly, the motor assembly screws may unknowingly shear.

Jun 04, 2013 – Navistar is recalling certain model year 2012-2013 International brand ProStar and TranStar commercial trucks, manufactured from August 01, 2011, through July 10, 2012, and equipped with front brake linings listed as feature codes 0504501, 0504504, or 04EWM. The brake S-Cam tube bracket assemblies on the steer axles may fracture.