INTERNATIONAL Recalls

Apr 17, 2013 – Navistar is recalling certain model year 2011-2012 International Lonestar, model year 2012-2013 International Terrastar and model year 2011-2013 International DuraStar, ProStar, TranStar, and WorkStar commercial trucks manufactured from June 1, 2010, through March 7, 2012 and equipped with day cab codes 16CAB, 16030, or 16196 and feature codes 16WCE, 16WCR, 16XWD, 16XWE, 16XWV, 16XXB, 16XXD, 16XXE, 16XXG, or 16XYN sun shades. The sun shade may not be properly secured to the cab roof panel which may result in partial or full separation of the sun shade from the roof panel.

Mar 20, 2013 – Navistar is recalling certain model year 2013 International ProStar commercial trucks, manufactured from January 24, 2012, through January 2, 2013, with feature codes 29AEB and 29AEC (Preset Plus hubs). The axle bearing retaining nut lock snap ring may have not been installed or may have been installed incorrectly which may result in the retainer nut working loose and possibly separating the wheel hub from the axle.

Jan 17, 2013 – Navistar is recalling certain model year 2012-2013 IC Bus brand model 1300FBC, CE, HC, and RE buses; model year 2011-2013 International brand model Durastar, model year 2013 International brand Workstar trucks; model year 2013 Holiday Rambler brand model Ambassador and Endeavor vehicles; and model year 2013 Monaco brand model Diplomat and Knight vehicles. These vehicles were manufactured August 5, 2010 through September 6, 2012 and are equipped with certain 2011-2013 model year I-6 engines with feature codes 12NUK, 12NUL, 12NUM, 12NUN, 12NUP, 12NUR, 12NUS, 12NUT, 12NUU, 12NUV, 12NUX, 12NUY and 12NUZ. The injection pressure regulator (IPR) harness wire may break due to vibrational damage. This could cause an unexpected shut down of the engine.

Nov 21, 2012 – Navistar is recalling certain model year 2012-2013 International brand ProStar and TranStar commercial trucks, manufactured from August 01, 2011, through June 12, 2012, and equipped with front brake linings listed as feature codes 0504501 or 0504504. The brake S-Cam tube bracket assemblies on the steer axles may fracture.

Oct 18, 2012 – Navistar is recalling certain model year 2013 International ProStar commercial trucks, manufactured from May 14, 2012, through August 14, 2012, and equipped with tow hook feature code 01570. The tow hooks may not have been heat treated to specification resulting in reduced strength.

Oct 18, 2012 – Navistar is recalling certain model year 2012 International DuraStar and Workstar commercial trucks, manufactured from April 26, 2011, through December 19, 2011, and equipped with a 7 degree passenger seat (feature code 16JAJ or SCBA). During a load test, the front passenger seat separated from its mounting rails. Thus, the vehicles failed to conform to the requirements of Federal Motor Vehicle Safety Standard No. 207, "Seating Systems."

Oct 17, 2012 – Navistar is recalling certain model year 2013 International brand LoneStar, ProStar, and WorkStar commercial trucks, manufactured from April 22, 2012, through October 29, 2012, and equipped with steering wheel feature codes 05CAW, 05CAX, 05CAZ, 05CBA, or 05WBD. The steering wheel may not have been completely welded to its mounting hub.

Sep 20, 2012 – Navistar is recalling certain model year 2013 International 8600, 2012 and 2013 Durastar, 2011-2013 ProStar, and 2012 WorkStar trucks, manufactured from November 23, 2010, through April 02, 2012, and equipped with piston spring brake feature code 04EVP. The piston bore area of the parking brake chamber may have an air leak could result in the parking brake not fully releasing.

Sep 12, 2012 – Geo. Heiser Body Company, Inc., (Geo. Heiser Body Company) is recalling certain model year 2006 International and 2010-2013 Fuso, Hino, International, Kenworth, and Peterbilt vehicles equipped with Sure Power battery separator devices. These devices may overheat.

Aug 14, 2012 – Navistar is recalling certain model year 2011-2013 International vehicles manufactured from November 2, 2010 through May 25, 2012, equipped with Bendix air disc brakes. Bolts that fasten the air disc brake caliper to the caliper mounting plate may not have been tightended to their specified torque. This may cause the mouting bolts to become loose and possibly allow the air disc brake caliper to separate from the caliper mounting plate, resulting in an unexpected pull condition during braking application or an unexpected increase in stopping distance.