INTERNATIONAL Recalls

Jul 19, 2012 – Navistar is recalling certain model year 2010-2011 International Lonestar vehicles, manufactured from January 29, 2009, through February 21, 2011 and equipped with the Harley Davidson option package with feature codes 27DRV and 28DRV. Over time, due to corrosion and fatigue, the wheels may crack, resulting in possible wheel separation from the vehicle.

Jun 20, 2012 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2013 INTERNATIONAL DURASTAR TRUCKS, MANUFACTURED FROM FEBRUARY 12, 2012, THROUGH MARCH 19, 2012, EQUIPPED WITH CAB CODES 16030 OR 16AAK. THE WINDSHIELD AND BACKLIGHT GLASS ON THESE VEHICLES WERE INSTALLED WITHOUT PRIMER SEAL APPLICATION. OVER TIME, THIS MAY CAUSE SEPARATION FROM THE CAB.

May 02, 2012 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2010 THROUGH 2013 PAYSTAR, WORKSTAR, TRANSTAR, AND PROSTAR, AND MODEL YEAR 2012 AND 2013 LONESTAR COMMERCIAL TRUCKS MANUFACTURED FROM JUNE 1, 2009, THROUGH APRIL 4, 2012, EQUIPPED WITH A MAXXFORCE 11 OR 13 ENGINE (FEATURE CODE 12UXJ OR 12UXH) AND WITH BOSCH ALTERNATOR FEATURE CODES 08GGN, 08GGR, 08GHG, OR 08GHH. THE ALTERNATOR CABLE MAY RUB ON THE HIGH PRESSURE POWER STEERING HOSE, POSSIBLY CHAFING ITS INSULATION AND CAUSING AN ELECTRICAL SHORT.

Apr 17, 2012 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012 INTERNATIONAL TERRASTAR TRUCKS, MANUFACTURED FROM AUGUST 23, 2011, THROUGH NOVEMBER 16, 2011 AND EQUIPPED WITH A SHEPPARD M83 STEERING GEAR (FEATURE CODE 05PSN). THE FASTENER ATTACHING THE PITMAN ARM TO THE STEERING GEAR SHIFT MAY HAVE BEEN OVER TIGHTENED. AS A RESULT, THE SECURING BOLT MAY FAIL AND THE PITMAN ARM MAY SEPARATE FROM THE STEERING GEAR.

Mar 22, 2012 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012 AND 2013 INTERNATIONAL WORKSTAR TRUCKS MANUFACTURED FROM NOVEMBER 15, 2010, THROUGH MARCH 6, 2012, AND EQUIPPED WITH HEADLIGHTS IN THE BUMPER. THE HEADLIGHT BEAM CIRCUIT AND THE GROUND CIRCUIT ARE SWITCHED AT THE HEADLIGHT CONNECTOR. THE SWITCHED CIRCUITS AFFECTS THE HEADLIGHTS WATTAGE, RESULTING IN THE BUMPER HEADLIGHT BEING DIMMER THAN ALLOWED BY FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

Mar 22, 2012 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012 INTERNATIONAL LONESTAR AND PROSTAR TRUCKS, MANUFACTURED FROM MARCH 24, 2011, THROUGH NOVEMBER 22, 2011, EQUIPPED WITH a FEATURE CODE 08VTS, 08JAU, OR 08JAW BATTERY BOX. THE MOUNTING BRACKETS USED TO INSTALL THE BATTERY BOX LOWER STEP WERE ASSEMBLED WITH TWO WELDS INSTEAD OF THREE WELDS AND MAY CAUSE THE STEP MOUNT TO BREAK OFF FROM THE BRACKET.

Feb 13, 2012 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012-2013 IC BUS CE-C, HC, AND INTERNATIONAL 9400 AND CERTAIN MODEL YEAR 2011 THROUGH 2013 INTERNATIONAL DURASTAR, PAYSTAR, WORKSTAR, TRANSTAR, LONESTAR, PROSTAR, 9200, AND 9800, AND CERTAIN MODEL YEAR 2013 INTERNATIONAL 9900, VEHICLES, MANUFACTURED FROM DECEMBER 2, 2010, THROUGH JANUARY 26, 2012, AND EQUIPPED WITH BENDIX ATR-6 TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKES CAUSING CONTINUOUS BRAKE APPLICATION.

Jan 18, 2012 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2005-2011 INTERNATIONAL 3200IM, AND MODEL YEAR 2007-2011, IC BUS MODEL HC BUSES, MANUFACTURED FROM AUGUST 16, 2004, THROUGH MAY 13, 2010. WHEN THE BUS KNEELING FEATURE IS ACTIVATED, THE REAR BRAKE LINE MAY BE PINCHED BY A FRAME MEMBER CAUSING THE REAR BRAKES TO DRAG.

Dec 19, 2011 – NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2012 INTERNATIONAL DURASTAR AND IC BUS HC HEAVY TRUCKS AND BUSES MANUFACTURED FROM FEBRUARY 10, 2011, THROUGH FEBRUARY 18, 2011,THAT WERE EQUIPPED WITH A MERITOR MFS08 SERIES NON-DRIVE FRONT STEER AXLE. DURING THE ASSEMBLY PROCESS, THE STEERING ATTACHMENT BOLTS MAY HAVE BEEN INSUFFICIENTLY TORQUED.

Dec 19, 2011 – NAVISTAR IS RECALLING CERTAIN 2012 INTERNATIONAL PROSTAR COMMERCIAL TRUCKS MANUFACTURED FROM MARCH 22, 2011, THROUGH DECEMBER 9, 2011, EQUIPPED WITH FEATURE CODE 04AZX MERITOR WABCO ELECTRONIC STABILITY CONTROL (ESC) UNITS. UNDER CERTAIN ROAD AND DRIVING CONDITIONS, VEHICLE BODY ROLL AND ROAD INCLINATION CHARACTERISTICS MAY ADVERSELY AFFECT THE SLIP ANGLE CALCULATION OF THE ELECTRONIC STABILITY CONTROL (ESC) SYSTEM. THIS MIGHT CAUSE THE ESC TO PERCEIVE AN OVER STEERING SITUATION AND THEREFORE APPLY THE OUTER WHEEL BRAKE ON THE FRONT AXLE UNTIL THE VEHICLE IS PERCEIVED TO BE STABLE.