OSHKOSH Recalls

Apr 07, 2014 – Oshkosh Corporation (Oshkosh) is recalling certain model year 2012-2014 S-Series Ready Mixed Concrete trucks manufactured February 29, 2012, through January 27, 2014, and equipped with certain Cummins Westport Model ISL G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor.

Dec 30, 2013 – Oshkosh Corporation is recalling certain model year 2013 S-Series ready mixed concrete trucks manufactured May 1, 2013, through November 27, 2013. In the affected vehicles, the brake pedal bracket may loosen due to missing lock washers.

Aug 13, 2013 – Pierce Manufacturing is recalling one model year 2008 Oshkosh AMAMTH-2 trailer manufactured in February 2008. The trailer is equipped with a Ricon wheelchair lift with an optional armored pendant cable. The armored cable may be positioned such that it does not clear the wheelchair lift.

Feb 01, 2010 – OSHKOSH IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 OSHKOSH H-SERIES SNOW BLOWERS OPERATED ON PUBLIC ROADS MANUFACTURED BETWEEN AUGUST 20, 2008, AND JANUARY 22, 2010. AN ELECTRICAL POWER CABLE MAY COME IN CONTACT WITH A HYDRAULIC HOSE. RUBBING MAY WEAR AWAY THE ELECTRICAL POWER CABLE INSULATION AND THE HOSE BODY. EVENTUALLY THE POWER CABLE INTERFERENCE MAY CAUSE SPARKS AND ARCING.

May 05, 2009 – OSHKOSH IS RECALLING 302 MY 2008 T-SERIES, TX, STA, H, P, S AND H-TRACTOR, AIRPORT RESCUE, FIREFIGHTING, COMMERCIAL, CONCRETE MIXER AND MILITARY TRUCKS AND HIGHWAY VEHICLES EQUIPPED WITH HALDEX AIR BRAKE SYSTEM CONTROL VALVE. THE RUBBER DIAPHRAGM USED INSIDE THE QUICK RELEASE VALVE (QRV) MAY DELAMINATE AND MAY CAUSE LEAKAGE LEVELS PAST AND/OR THROUGH THE DIAPHRAGM IN EXCESS OF PERMISSIBLE SPECIFICATIONS, OR COULD CAUSE A RESTRICTION IN THE AIR FLOW, THEREBY EFFECTING PRESSURE DELIVERY TO THE SERVICE BRAKES AND NOT ALLOW THE SERVICE BRAKES TO RELEASE.

Jul 31, 2007 – ON CERTAIN MILITARY TRUCKS EQUIPPED WITH CATERPILLAR C-15 ENGINES, THE VARIABLE VALVE ACTUATION OIL LINE MAY WEAR AGAINST THE SHARP EDGE OF THE CYLINDER HEAD IF NOT POSITIONED CORRECTLY.

Jul 02, 2007 – ON CERTAIN TRUCKS EQUIPPED WITH BENDIX SR-7 SPRING BRAKE MODULATING VALVES, THE INTERNAL RUBBER CHECK VALVE MAY LEAK CAUSING A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER THE OPERATOR PULLS THE DASH VALVE BUTTON.

Oct 12, 2006 – ON CERTAIN TRUCKS EQUIPPED WITH ARVINMERITOR AXLE ASSEMBLIES, THE TORQUE ROD TOWER HAS A NONCONFORMING LOCATION AND WELD. THE WELD CAN CRACK, LEADING TO THE TANDEM AXLE LOSING ITS ANCHOR POINT, CAUSING THE DRIVELINE TO BEND TO AN ANGLE OUTSIDE ITS OPERATING PERIMETERS.

Jun 19, 2006 – ON CERTAIN TRUCKS EQUIPPED WITH SR-7 BENDIX BRAKE VALVES, THE CHECK VALVE INSIDE THE VALVE CAVITY MAY NOT PROPERLY SET, CAUSING INTERNAL AIR LEAKAGE. IF THE CHECK VALVE DOES NOT PROPERLY SEAT, THE RESULTING LEAKAGE CAN CAUSE A DELAY IN THE APPLICATION OF THE SPRING BRAKES TO PARK THE VEHICLE AFTER OPERATOR PULLS THE DASH VALVE BUTTON.

Jul 20, 2005 – ON CERTAIN TEREX ADVANCE CONCRETE MIXERS EQUIPPED WITH HOLLAND AIR SUSPENSION SYSTEMS, A TRANSVERSE BEAM CASTING MAY FRACTURE UNDER NORMAL LOADS. IF A CASTING BREAKS WHEN THE VEHICLE IS TRAVELING ON A ROADWAY THERE IS THE POTENTIAL FOR PIECES OF THE CASTING TO BECOME PROJECTILES AND THE SUSPENSION'S TRANSVERSE BEAM MAY DROP DOWN LOW ENOUGH TO CONTACT THE ROAD SURFACE.