CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010 CHRYSLER 300, DODGE CHALLENGER

May 11, 2010 — Recall Campaign #10V200000

CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010 CHRYSLER 300, DODGE CHALLENGER, CHARGER, JEEP COMMANDER, GRAND CHEROKEE AND DODGE RAM VEHICLES. THESE VEHICLES MAY HAVE BEEN BUILT WITH A WIRELESS IGNITION NODE (WIN) MODULE EXHIBITING A BINDING CONDITION OF THE SOLENOID LATCH.

The recall was influenced by the manufacturer with about 37,335 units affected.

See recall notice

NHTSA Safety Recall Notice

10V200000

Manufacturer:	Chrysler (FCA US, LLC)
Recall date:	May 11, 2010
NHTSA Campaign #:	10V200000
Units affected:	37,335

Description:: CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010 CHRYSLER 300, DODGE CHALLENGER, CHARGER, JEEP COMMANDER, GRAND CHEROKEE AND DODGE RAM VEHICLES. THESE VEHICLES MAY HAVE BEEN BUILT WITH A WIRELESS IGNITION NODE (WIN) MODULE EXHIBITING A BINDING CONDITION OF THE SOLENOID LATCH.
Consequeces:: THE RESULT OF THE DEFECT COULD LEAD TO A CONDITION WHERE THE KEY MAY BE REMOVED FROM THE IGNITION SWITCH (WIN MODULE) PRIOR TO PLACING THE SHIFTER IN PARK. THIS COULD RESULT IN THE POTENTIAL FOR UNINTENDED VEHICLE MOVEMENT AND COULD INCREASE THE RISK OF A CRASH.
Corrective action:: DEALERS WILL INSPECT AND REPLACE THE WIN MODULE FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR BEFORE AUGUST 23, 2010. OWNERS MAY CONTACT CHRYSLER AT 1-800-853-1403.
Notes:: CHRYSLER'S RECALL CAMPAIGN NUMBER IS K08.OWNERS MAY ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY 1-800-424-9153), OR GO TO HTTP://WWW.SAFERCAR.GOV .

Affects the following:

2010 CHRYSLER 300 Complaints
I have a 2010 Chrysler 300 and when I fill my tank up I take the handle out when it clicks I don’t keep filling because I know not to. My car will smell like someone poured gas into my backseat and if I roll the driver side window down for air it seems to get stronger for a little over 3 months now until it gets a quarter in a half below full. Now I don’t fill my car up all the way due to that and no one has figured it out yet. I have replaced lines and caps and now the fuel pump to find out none of it was the problem. I was followed home tonight to be told my car was pouring out gas from under the fuel pump area while I was driving. So I took a video of it pouring out under the driver back seat area and then I pulled off the back seat to find gas all on top of my brand new fuel pump. First I figured maybe the seal wasn’t on right but everything was put on correctly but yet I have no clue why there is gas everywhere especially seeing the pump is in correct. I can’t drive my car nor take my grandson anywhere with my car smelling like gas. Not understanding why my old and new fuel pump is backing up and I wouldn’t run my car on empty nor overfill. I have spent a bit of money into my car replacing things to continue to have the same problem. Major issue scared to ride in my car not knowing if it is going to catch on fire and that is my main transportation. By the way I changed my fuel pump because my car wouldn’t start yesterday and I didn’t hear the fuel pump turning on so tapped it a few times and it clicked on and it was whining so loud I parked it a few blocks away at a family members house scared to be stuck on the side of the road going home yesterday. Seatbelt lock box quit working as well I literally have to push it in 50 times to get it to click very irritating especially if you are in a hurry but that is way minor compared to my gas issue for the last few months Wish I could share video to show gas pouring out can’t see in pictures;
2010 DODGE CHALLENGER Complaints
Was driving and a tick was present then over heated sat on side of road until cooled down added coolant drove home . The next day car was drivable. Drove to school and car was sounding funny so took it to a repair shop and they told me the particular engine in the vehicle has a fuel efficient component where it shuts down the cylinders on the freeway, and the lifters are supposed to open, but our lifter did not open. It got stuck and grind the camshaft in the motor. Needless to say I had to have the car towed home. It’s just sitting in my parking lot. I tried calling Dodge. They wouldn’t help me. I tried calling multiple agencies to help. I looked up on the Internet and there is multiple complaints about the same problem it’s called the hemi lift so hopefully one day this can be recalled because I’m still paying on the car. I had a year and a half. No one will help me. My kids were driving the car. What if the thing blew up on them on the freeway and somebody hit them because Car wouldn’t move anymore . Or if they were taking the car through the desert and there is no phone calls and no one around. If they were going around corners of a mountain and just stopped on them or blew up because can’t drive the car anymore. very bad and scary and sad that the builder of that motor won’t fix their mistake and leave countless people stranded and in a predicament;
2010 DODGE CHARGER Complaints
Odometer Fraud. The contact purchased a 2010 DODGE Charger. It was discovered that there was a mileage discrepancy. The vehicle was a private sale. At the time of purchase, the vehicle mileage was 71,000 and at the time of registration, it was discovered that the mileage was 162,185.;
2010 DODGE RAM 1500 Complaints
The contact owns a 2010 Dodge Ram 1500. The contact stated while driving at an undisclosed speed, the driveshaft detached. No warning lights were illuminated. The contact received notification for NHTSA Campaign Number: 13V038000 (Power Train) however, the part to complete the recall repair was not yet available. The vehicle was towed to a dealer, where it was diagnosed that the rear axle pinion nut needed to be replaced. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 262,420. ;
2010 JEEP COMMANDER Complaints
My jeep will not crank sometimes...the key will not turn. The ignition control module seems to be a problem.;