Chrysler Group LLC is recalling certain model year 2012 RAM 3500 trucks manufactured May 4

Aug 06, 2013 — Recall Campaign #13V344000

Chrysler Group LLC (Chrysler) is recalling certain model year 2012 RAM 3500 trucks manufactured May 4, 2012, through August 7, 2012; and model year 2012 RAM 4500 and 5500 trucks manufactured May 3, 2012, through August 7, 2012. Due to a loose snap ring inside the transmission, there may be a loss of power transfer through the transmission to the wheels.

The recall was influenced by the manufacturer with about 85 units affected.

See recall notice

NHTSA Safety Recall Notice

13V344000

Manufacturer:	Chrysler (FCA US, LLC)
Recall date:	August 06, 2013
NHTSA Campaign #:	13V344000
Units affected:	85

Description:: Chrysler Group LLC (Chrysler) is recalling certain model year 2012 RAM 3500 trucks manufactured May 4, 2012, through August 7, 2012; and model year 2012 RAM 4500 and 5500 trucks manufactured May 3, 2012, through August 7, 2012. Due to a loose snap ring inside the transmission, there may be a loss of power transfer through the transmission to the wheels.
Consequeces:: An unexpected loss of power transfer may increase the risk of a crash.
Corrective action:: Chrysler will notify owners, and dealers will replace the transmission assembly free of charge. The recall began on October 17, 2013. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N50.
Notes:: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Affects the following:

2012 DODGE RAM 3500 Complaints
Driving my 2012 dodge ram 3500, just as I was crossing one of the busiest intersections in my town my truck lost all power and dropped from 35mph to 5 mph. Barley made it acrossed and pulled over. As soon as I pulled over the engine light comes on, checked code, and U010C lost coms with turbo actuator comes up. Turned truck off and rest code and everything back to normal. About a week later it happened again, luckily not as busy of a spot. Called dealer and soonest appointment was in April. Meanwhile I look up code and see hundreds of post for same issue, bad actuator replace. 28 years as a diesel mechanic for the military, so I found the part online and ordered. Replaced the actuator, drove about 50 miles, light comes back on. Finally get my appointment with dealer and they say my turbo is bad, they want $8k to fix. I ordered the turbo and replaced it myself along with another actuator, test drove. Light still comes on but have not lost power yet?? Dealer is not helping. This is a major issue that is all over the internet! The truck just goes to limp and your in the middle of traffic. If this has not caused an accident it’s only a matter of time before it does. The dealer ship just wants to replace big parts for lots of money. I’m already $2500 into this and still having an issue;
2012 DODGE RAM 4500 Complaints
FRONT WHEEL BEARING ON DRIVER SIDE WENT OUT ON THE TRUCK IT MADE A CRUNCHING SOUND. I WAS ON A CITY STREET HEADED BACK HOME. HAD TO TOW TRUCK TO REPAIR SHP, HAD TO REPLACE HUB ASSY, BRAKE ROTOR'S, BRAKE CALIPER, AXLE SEAL, AXLE COLLAR. THE COST WAS $1,589.43. THE IS A 2012 DODGE RAM 4500.;
2012 DODGE RAM 5500 Complaints
The contact owns a 2012 Dodge Ram. The contact stated that while driving at approximately 55 mph the vehicle started making noise coming from the engine compartment. The smoke originates from the engine compartment and the exhaust pipe in the rear of the vehicle and when the accelerator was depressed the vehicle did not accelerate. Additionally, the check engine safety warning light became illuminated. The contact stated that the vehicle veered to the side of the road where the vehicle was turned off but the engine continued to run. The vehicle was towed to a dealer where the Engine, Intake system, and Exhaust needed to be replaced. The manufacturer was notified, The failure mileage was 73,031.;