THE AXLE HOUSINGS WERE MANUFACTURED WITH A TIGHT FRICTION WELD CURL RADIUS ON THE INSIDE DIAMETER OF
— Recall Campaign #96V096000
THE AXLE HOUSINGS WERE MANUFACTURED WITH A TIGHT FRICTION WELD CURL RADIUS ON THE INSIDE DIAMETER OF THE AXLE HOUSING. UNDER OPERATIONAL LOADS, CRACKS CAN INITIATE AT THE WELD CURL RADIUS ON THE INSIDE OF THE HOUSING. THESE CRACKS MAY PROPAGATE, EVENTUALLY ALLOWING THE AXLE SPINDLE TO SEPARATE FROM THE AXLE HOUSING.
The recall was influenced by the manufacturer with about 588 units affected.
NHTSA Safety Recall Notice
96V096000
| Manufacturer: | INTERNATIONAL TRUCK & ENGINE CORPORATION |
|---|---|
| Recall date: | June 11, 1996 |
| NHTSA Campaign #: | 96V096000 |
| Units affected: | 588 |
- Description:
- THE AXLE HOUSINGS WERE MANUFACTURED WITH A TIGHT FRICTION WELD CURL RADIUS ON THE INSIDE DIAMETER OF THE AXLE HOUSING. UNDER OPERATIONAL LOADS, CRACKS CAN INITIATE AT THE WELD CURL RADIUS ON THE INSIDE OF THE HOUSING. THESE CRACKS MAY PROPAGATE, EVENTUALLY ALLOWING THE AXLE SPINDLE TO SEPARATE FROM THE AXLE HOUSING.
- Consequeces:
- SEPARATION OF THE AXLE SPINDLE FROM THE AXLE HOUSING CAN RESULT IN LOSS OF VEHICLE CONTROL AND A POSSIBLE ACCIDENT.
- Corrective action:
- DEALERS WILL REPLACE THE REAR AXLE HOUSING WITH A NEW HOUSING.
- Notes:
- SYSTEM: SUSPENSION; SINGLE AXLE; REAR. VEHICLE DESCRIPTION: SCHOOL BUSES AND HEAVY DUTY TRUCKS EQUIPPED WITH "ROCKWELL" MODEL RA-42, 17,500 LB. REAR AXLES. (SEE ROCKWELL CAMPAIGN 91E047). OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME, SHOULD CONTACT NAVISTAR AT 1-800-448-7825. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.