BMW 740IL Recalls

May 27, 2010 – FCP GROTON IS RECALLING CERTAIN STEERING CENTER DRAG LINKS, P/N 32 21 1 096 057, SOLD FROM DECEMBER 1, 2009 THROUGH APRIL 9, 2010 AS REPLACEMENT EQUIPMENT FOR MODEL YEAR 1995 THROUGH 2001 BMW 740I, 740IL, AND 750IL PASSENGER VEHICLES. THE SHAFT OF THE STEERING CENTER TIE ROD MAY SHEAR OFF.

May 16, 2002 – ON CERTAIN PASSENGER VEHICLES, THE ENGINE AUXILIARY/COOLING FAN OPERATION, INCLUDING VARIABLE SPEED, IS ELECTRONICALLY CONTROLLED. FAILURE OF THE FAN MOTOR CAN CAUSE THE ELECTRICAL CIRCUITRY OF THE FAN CONTROL UNIT TO OVERLOAD AND FAIL, CAUSING THE FAN TO STOP OPERATING.

Jun 21, 2001 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE ENGINE AUXILIARY/COOLING FAN OPERATION, INCLUDING VARIABLE SPEED, IS ELECTRONICALLY CONTROLLED. FAILURE OF THE FAN MOTOR CAN CAUSE THE ELECTRICAL CIRCUITRY OF THE FAN CONTROL UNIT TO OVERLOAD AND FAIL, CAUSING THE FAN TO STOP OPERATING.

Jan 04, 2001 – VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH 18-INCH TIRES. (18-INCH TIRES ARE STANDARD EQUIPMENT ON THE M5 AND OPTIONAL EQUIPMENT ON THE 7-SERIES MODELS). THE MACHINE USED TO MOUNT AND INFLATE THE TIRES ON THE WHEELS AT THE ASSEMBLY PLANT MAY HAVE DAMAGED THE SIDEWALL OF ONE OR MORE TIRES. THE DAMAGED AREA COULD WEAKEN TO THE POINT WHERE A SUDDEN LOSS OF AIR FROM THE TIRE COULD OCCUR.

Feb 17, 2000 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE BRAKE LAMPS IN THESE VEHICLES ARE CONTROLLED BY A SWITCH ACTIVATED BY THE MOVEMENT OF THE BRAKE PEDAL. THIS SWITCH COULD FAIL INTERNALLY, CAUSING IT TO REMAIN EITHER IN THE "BRAKE LAMPS OFF" POSITION OR IN THE "BRAKE LAMPS ON" POSITION.

Jan 04, 1999 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE THICKNESS OF THE MAIN POSITIVE ELECTRICAL CABLE (GENERATOR TO STARTER) INSULATION IS LESS THAN SPECIFIED, MAKING IT SUSCEPTIBLE TO BEING ABRADED OR CUT BY THE CLIP THAT SECURES THE CABLE TO THE GENERATOR.

Jan 04, 1999 – VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH A 5HP24 AUTOMATIC TRANSMISSION. PREMATURE WEAR OF THE RING GEAR CAN OCCUR, LEADING TO THE LOSS OF 1ST, 2ND, 3RD, AND REVERSE GEARS.

Aug 04, 1998 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. A MALFUNCTION OR FAILURE OF A COOLANT SYSTEM COMPONENT, SUCH AS A THERMOSTAT, WATER PUMP, OR FAN BELT, CAN RESULT IN SIGNIFICANTLY INCREASED COOLANT TEMPERATURE AND SYSTEM PRESSURE. IF THE INDICATIONS OF A CRITICAL OVERHEATING CONDITION IS NOT NOTICED BY THE DRIVER, IT IS POSSIBLE THAT DAMAGE TO, OR FAILURE OF, A COOLANT SYSTEM COMPONENT COULD OCCUR.

Jun 22, 1998 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE DIFFERENTIAL PINION SHAFT WITHIN THE DIFFERENTIAL CASE ASSEMBLY WAS PRODUCED WITHOUT THE APPROPRIATE SURFACE HARDENING. THIS CAN RESULT IN THE SHAFT EXPERIENCING PREMATURE WEAR.

Aug 22, 1997 – VEHICLE DESCRIPTION: PASSENGER VEHICLES. ROAD GRIT AND GRAVEL ASSOCIATED WITH WINTER ROAD CONDITIONS CAN PENETRATE THE RUBBER OF THE LOWER FRONT SPRING MOUNTS AND ACCUMULATE IN THE MOUNTS CAUSING NOTCHES OR PITS TO DEVELOP. THESE NOTCHES CAN DEVELOP CRACKS RESULTING IN BREAKAGE OF A BOTTOM COIL OF THE SPRING.