BMW Recalls

Apr 15, 2010 – BMW IS RECALLING CERTAIN MODEL YEAR 2010 X5 M SAV VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT," THESE VEHICLE'S WERE EQUIPPED WITH SIDE MARKER LAMPS, BUT NOT THE POWER SUPPLY CABLES LEADING TO THE LAMPS. AS A RESULT, THE SIDE MARKER LAMPS DO NOT ILLUMINATE.

Feb 18, 2010 – BMW IS RECALLING CERTAIN MODEL YEAR 2009-2010 7-SERIES AND MODEL YEAR 2010 550i GRAND TURISMO VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110 "TIRE SELECTION AND RIMS." THESE VEHICLE'S ARE EQUIPPED WITH A TIRE PRESSURE LABEL INDICATING THAT THE VEHICLE'S SEATING CAPACITY IS FIVE (5) PASSENGERS. THE ACTUAL SEATING CAPACITY IS FOUR (4) PASSENGERS. THE TIRE SIZE, TIRE PRESSURE, AND VEHICLE CAPACITY WEIGHT ON THE LABEL ARE CORRECT.

Jan 28, 2010 – BMW IS RECALLING CERTAIN MODEL YEAR 2010 X5 AND X6 SPORT ACTIVITY VEHICLES MANUFACTURED BETWEEN DECEMBER 14, 2009 AND DECEMBER 16, 2009. IN THE UPPER RIGHT AREA OF THE WINDSHIELD, BONDING MAY BE INSUFFICIENT OVER A LENGTH OF APPROXIMATELY 50CM.

Dec 30, 2009 – BMW IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 F650 GS AND F800 GS MOTORCYCLES MANUFACTURED BETWEEN JANUARY 2008 AND DECEMBER 2009. DURING ENGINE OPERATION, A VACUUM IS CREATED IN ORDER TO DRAW FRESH AIR INTO THE CANISTER. THIS AIR THEN MIXES WITH THE FUEL VAPORS CAPTURED BY THE CANISTER, AND IS SUBSEQUENTLY COMBUSTED. DUE TO THE ROUTING OF THE VENTILATION HOSE, WATER NEAR THE END OF THE HOSE COULD BE DRAWN INTO THE CHARCOAL CANISTER.

Dec 10, 2009 – BMW IS RECALLING CERTAIN MODEL YEAR 2009 AND 2010 K1300 S AND K1300 GT MOTORCYCLES MANUFACTURED BETWEEN SEPTEMBER 11, 2008 AND NOVEMBER 19, 2009. POOR FUEL QUALITY MAY LEAD TO SMALL DEPOSITS WITHIN THE THROTTLE BODIES. DURING ENGINE OPERATION IN A LOW RPM RANGE, TYPICALLY NEAR IDLE SPEED (WHEN COMING TO A STOP) AIR FLOW COULD BE SUFFICIENTLY RESTRICTED AND ENGINE STALLING COULD OCCUR.

Sep 29, 2009 – BMW IS RECALLING CERTAIN MODEL YEAR 2009 MOTORCYCLES. THE SWITCHES ON THE HANDLEBARS FOR BOTH THE DIRECTION INDICATOR AND THE EMERGENCY ENGINE OFF/ENGINE-START FUNCTIONS MAY FAIL.

Aug 11, 2009 – BMW IS RECALLING CERTAIN MODEL YEAR 2009 Z4 30I AND 35I VEHICLES MANUFACTURED BETWEEN MARCH 10 AND MARCH 19, 2009. A DEFECTIVE CRIMP CONNECTOR IN A BELT TENSIONER WIRING PLUG MAY LEAD TO INCREASED ELECTRICAL RESISTANCE OF THAT CONNECTION.

Aug 07, 2009 – BMW IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2008 R1200 GS MOTORCYCLES MANUFACTURED BETWEEN AUGUST 2006 AND JANUARY 2008. THE SEALING OF THE FUEL PUMP CONTROL UNIT HOUSING MIGHT BE INSUFFICIENT AND WATER COULD INTRUDE INTO THE CONTROL UNIT HOUSING CREATING A HUMID ATMOSPHERE. UNDER SUCH CONDITIONS, THE FUEL PUMP COULD CORRODE AND THEN FAIL.

Jul 08, 2009 – BMW IS RECALLING MY 2009 X5 AND X6 VEHICLES. THE REAR BRAKE DISCS MAY NOT HAVE BEEN MANUFACTURED ACCORDING TO SPECIFICATIONS. AS A RESULT, A REDUCTION IN BRAKING PERFORMANCE AT THE AFFECTED REAR WHEEL COULD OCCUR.

Jul 08, 2009 – BMW IS RECALLING 1,535 MY 2007-2009 R1200RT MOTORCYCLES. DUE TO ROUTING AND ASSEMBLY TOLERANCES OF THE FRONT BRAKE LINES, IT IS POSSIBLE FOR THE LINES TO BE UNDER STRAIN. IN COMBINATION WITH VIBRATION DURING RIDING, THE BRAKE LINES COULD DEVELOP A LEAK. THE LEVEL OF FLUID IN THE FRONT BRAKE FLUID RESERVOIR COULD DROP RENDERING THE FRONT BRAKES INOPERATIVE.