COLLINS Recalls

Jul 19, 2012 – Collins is recalling certain model year 2012 Collins, Corbeil, and Mid-Bus school bus and multi-function school activity buses, models SL400, SH400, DH400, DH416 with 139" wheel base and two-passenger seat set at 24, 25, 26, 27, or 28" hip to knee spacing and three-passenger seat set at 24, 25, or 26" hip to knee spacing and model year 2012 DH500 and DH516 with 159" wheel base and two-passenger seat set at 28 or 29" hip to knee spacing and three-passenger seat set at 27, 28, or 29" hip to knee spacing. These buses were manufactured from March 12, 2012, through September 20, 2012. In some floor plans on these models of buses, there is the possibility that the fuel filler hose was damaged during seat or seat track installation or that a seat bolt and/or the seat bolt bracket interferes with the routing of the fuel fill hose. The fuel fill hose runs from the exterior of the bus, through a housing in the bus, then under the bus and toward the fuel tank. Some floor plans have a seat or track bolt that comes through the floor near the area where the hose crosses the chassis frame. In addition to possible damage during installation, there is a chance that the bolt or the bracket can abrade or puncture the hose in this area.

Jul 19, 2012 – Collins is recalling certain model year 2012 Collins, Mid-Bus, or Corbeil SL, SH, DH, and DE model school and multi-function school activity buses manufacturer from March 12, 2012, through July 3, 2012. When the Double Out Door is open, there is potential for a drawstring of a backpack or an article of clothing to become entangled in a gap at the door bracket or support hardware as a passenger is exiting the bus.

Jun 07, 2012 – COLLINS IS RECALLING CERTAIN MODEL YEAR 2008 AND 2010 GRAND BANTAM, SUPER BANTAM, MID BUS GRAND GUIDE, AND MID BUS SUPER GUIDE SCHOOL BUSES MANUFACTURED FROM FEBRUARY 21, 2008, THROUGH SEPTEMBER 21, 2010, EQUIPPED WITH BRAUN CENTURY-2 WHEELCHAIR LIFTS. OVER TIME, AND WITH FREQUENT USE, THE ROLL STOP LATCHES ON THE OUTER BARRIER MAY BECOME BENT OR MISALIGNED.

Oct 14, 2011 – COLLINS IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2008 BANTAM, GRAND BANTAM, AND SUPER BANTAM SCHOOL BUSES MANUFACTURED FROM AUGUST 23, 2006, THROUGH FEBRUARY 1, 2008, EQUIPPED WITH CARRIER GENV EM-1 EVAPORATOR UNITS. DUE TO TIME, TEMPERATURE, AND/OR VIBRATION, THE FUSE MAY LOOSEN IN THE FUSE HOLDER RESULTING IN HIGH RESISTANCE AND ARCING.

May 23, 2011 – COLLINS IS RECALLING CERTAIN MODEL YEAR 2002-2011 BANTAM, GRAND BANTAM, AND SUPER BANTAM SCHOOL BUSES MANUFACTURED FROM OCTOBER 2002 THROUGH MAY 20, 2011, FOR FAILING TO CONFORM TO THE LEG PROTECTION ZONE IMPACT REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD 222 "SCHOOL BUS PASSENGER SEATING AND CRASH PROTECTION."

Sep 28, 2010 – COLLINS IS RECALLING CERTAIN MODEL YEAR 2008 AND 2009 SUPER BANTAM AND GRAND BANTAM AND MID BUS SUPER GUIDE AND GRAND GUIDE SCHOOL BUSES BUILT ON FORD AND CHEVROLET PLATFORMS FROM MARCH 31, 2008 THROUGH JULY 31, 2009, EQUIPPED WITH SPECIALTY MANUFACTURING, INC. (SMI) 000290 LED LIGHT KITS. A CHANGE TO THE WIRE USED IN THE LED LIGHT KITS MAY REDUCE THE EFFECTIVE LIFE OF THE LIGHTS USED ON THE STOP ARMS. THE LIGHTS MAY STOP FUNCTIONING WITHOUT WARNING.

Aug 02, 2010 – COLLINS IS RECALLING CERTAIN MODEL YEAR 2008 BANTAM, GRAND BANTAM, AND SUPER BANTAM MODEL SCHOOL BUSES. THE 39 INCH THREE PASSENGER SEATS FAIL TO MEET THE MINIMUM PERFORMANCE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 222, "SCHOOL BUS PASSENGER AND CRASH PROTECTION."

Jun 29, 2010 – COLLINS IS RECALLING CERTAIN MODEL YEAR 2010 GRAND BANTAM AND SUPER BANTAM SCHOOL BUSES MANUFACTURED FROM OCTOBER 5, 2009 THROUGH JANUARY 4, 2010 AND BUILT WITH CERTAIN LAP SHOULDER BELT SEATS MANUFACTURED BY IMMI. THE SEAT CUSHION LOCKING MECHANISMS WERE MISALIGNED DURING VEHICLE ASSEMBLY. THIS FAILS TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 222, "SCHOOL BUS PASSENGER SEATING AND CRASH PROTECTION."

Feb 18, 2010 – COLLINS IS RECALLING CERTAIN MODEL YEAR 2009 BANTAM, SUPER BANTAM, AND GRAND BANTAM SCHOOL BUSES MANUFACTURED BETWEEN APRIL 1 AND OCTOBER 1, 2009, BUILT ON FORD CUTAWAY CHASSIS. THE BRAKE-TURN SEPARATOR MODULE WHICH IS USED TO CONTROL THE BRAKE LIGHTS AND TURN SIGNALS LIGHTS IN THE REAR MAY NOT ALWAYS DISTINGUISH CORRECTLY BETWEEN A BRAKE SIGNAL INPUT AND A TURN SIGNAL INPUT FROM THE FORD CHASSIS OEM WIRING. FOR TYPICAL BRAKE AND TURN SIGNAL OPERATION, THE STOP/TAIL/TURN LIGHTS AT THE REAR OF THE BUS WILL FUNCTION PROPERLY. HOWEVER, IF THE BRAKES ARE PUMPED/APPLIED IN A FREQUENCY MATCHING THAT OF THE BLINKING TURN SIGNAL WHILE THE TURN INDICATOR IS ON, THERE IS THE POTENTIAL THAT THE BRAKE SIGNAL THROUGH THE MODULE MAY CANCEL OUT THE TURN SIGNAL TEMPORARILY OR CAUSE IT TO FLASH INTERMITTENTLY.

Dec 11, 2009 – COLLINS IS RECALLING CERTAIN MODEL YEAR 2008 AND 2009 GRAND BANTAM, SUPER BANTAM, MID BUS GRAND GUIDE, AND MID BUS SUPER GUIDE SCHOOL BUSES MANUFACTURED FROM FEBRUARY 14 TO OCTOBER 19, 2009, EQUIPPED WITH A BRAUN NCL917IB-2 CENTURY WHEELCHAIR LIFT. THE TOE STOP INNER BARRIER AND PLATFORM MAY NOT BE ADJUSTED CORRECTLY POSSIBLY ALLOWING THE UNIT TO BE MOVED TO THE STOW POSITION. THESE WHEELCHAIR LEFTS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 404, "PLATFORM LIFT INSTALLATIONS IN MOTOR VEHICLES."