DODGE Recalls

Sep 29, 2011 – CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2012 CHRYSLER VEHICLES, INCLUDING 200 AND TOWN AND COUNTRY MODELS, DODGE VEHICLES, INCLUDING CHARGER, DURANGO, GRAND CARAVAN AND JOURNEY MODELS AND JEEP GRAND CHEROKEE VEHICLES MANUFACTURED FROM AUGUST 31, 2011, THROUGH SEPTEMBER 13, 2011, THAT ARE EQUIPPED WITH 3.6L ENGINES. THESE ENGINES MAY EXPERIENCE CONNECTING ROD BEARING FAILURE DUE TO DEBRIS INSIDE THE ENGINE BLOCK.

Sep 08, 2011 – KOVATCH (KME) IS RECALLING CERTAIN MODEL YEAR 2010 AND 2011 PREDATOR PUMPER FIRE TRUCKS AND 2011 5500 RESCUE FIRE TRUCKS MANUFACTURED FROM APRIL 2010 THROUGH MARCH 2011, EQUIPPED WITH A CUMMINS ISX OR ISL DIESEL ENGINE. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.

Aug 09, 2011 – MERCEDES-BENZ USA (MBUSA) IS RECALLING CERTAIN MODEL YEAR 2002- 2003 SPRINTER 2500 AND 3500 VANS SOLD AS DODGE AND FREIGHTLINER VEHICLES. THE INTAKE MANIFOLDS MAY HAVE CORRODED. A CHEMICAL REACTION INVOLVING SULFUR IN THE DIESEL FUEL THAT TAKES PLACE UNDER CERTAIN CONDITIONS CAN LEAD TO THE FORMATION OF SULFURIC ACID IN THE EXHAUST CHANNEL OF THE INTAKE MANIFOLD.

Aug 03, 2011 – CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008 CHRYSLER GRAND VOYAGER, TOWN AND COUNTRY AND DODGE GRAND CARAVAN VEHICLES MANUFACTURED FROM JUNE 24, 2007, THROUGH JULY 30, 2008. THESE VEHICLES MAY EXPERIENCE A HEATING AND AIR CONDITIONER (HVAC) CONDENSATE LEAK FROM THE HVAC DRAIN GROMMET ONTO THE OCCUPANT RESTRAINT CONTROL (ORC) MODULE, WHICH CAN LEAD TO THE ILLUMINATION OF THE AIRBAG WARNING LIGHT AND A POTENTIAL INADVERTENT AIRBAG DEPLOYMENT WITHOUT WARNING.

Jul 06, 2011 – CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2008-2011 DODGE RAM 2500/3500 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; MODEL YEAR 2008-2011 DODGE RAM 3500 CAB CHASSIS 4X2, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH MARCH 28, 2011; AND MODEL YEAR 2008 DODGE RAM 1500 MEGA CAB 4X4, MANUFACTURED FROM FEBRUARY 14, 2008, THROUGH AUGUST 15, 2008, BECAUSE THE LEFT TIE ROD BALL STUD MAY FRACTURE. THIS CONDITION TENDS TO OCCUR DURING LOW SPEED PARKING LOT TYPE MANEUVERS WHEN THE CUSTOMER IS MAKING A TIGHT TURN. ADDITIONALLY, MODEL YEAR 2003-2008 DODGE RAM 2500/3500 VEHICLES MAY HAVE RECEIVED THE AFFECTED TIE ROD ASSEMBLY AS A REPLACEMENT PART DURING NORMAL SERVICE.

Jun 08, 2011 – CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2011DODGE JOURNEY, JEEP WRANGLER, CHRYSLER 200, CHRYSLER 200 CONVERTIBLE, DODGE AVENGER, DODGE NITRO, JEEP LIBERTY, DODGE CALIBER, JEEP COMPASS, JEEP PATRIOT, DODGE GRAND CARAVAN AND CHRYSLER TOWN & COUNTRY VEHICLES. SOME OF THESE VEHICLES MAY HAVE BEEN BUILT WITH A MISSING OR INCORRECTLY INSTALLED STEERING COLUMN PIVOT RIVET.

Mar 30, 2011 – MERCEDES-BENZ IS RECALLING CERTAIN MODEL YEAR 2008-2011 2500 AND 3500 SPRINTER VEHICLES EQUIPPED WITH AN OPTIONAL THREE-SEAT BENCH IN THE PASSENGER COMPARTMENT. THE SEAT BENCHES IN THE SECOND SEATING ROW MAY HAVE BEEN EQUIPPED WITH SAFETY BELTS THAT DO NOT MEET THE MINIMUM REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD 208, "OCCUPANT PROTECTION IN INTERIOR IMPACT," AND MOTOR VEHICLE SAFETY STANDARD 209, "SEAT BELT ASSEMBLIES." FIRST, THOSE SAFETY BELTS MAY NOT LOCK AS REQUIRED. SECOND, THE ASSEMBLY LOOP MAY NOT PERFORM TO MINIMUM FORCE REQUIREMENTS.

Mar 01, 2011 – CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2010 DODGE JOURNEY, GRAND CARAVAN, AND CHRYSLER TOWN & COUNTRY VEHICLES MANUFACTURER FROM AUGUST 3, 2009, THROUGH JUNE 17, 2010. SOME VEHICLES MAY EXPERIENCE INADVERTENT IGNITION KEY DISPLACEMENT FROM THE RUN TO ACCESSORY POSITION WHILE DRIVING CAUSING THE ENGINE TO SHUT OFF.

Dec 27, 2010 – FEDERAL-MOGUL IS RECALLING CERTAIN REPLACEMENT CONTROL ARM ASSEMBLIES, PART NUMBERS K7425, 10945, FA4510X, K7427, 10946, AND FA4611X, SOLD FOR USE ON VARIOUS PASSENGER VEHICLES LISTED ABOVE. THE BALL JOINT ON THE CONTROL ARM ASSEMBLY CAN FAIL CAUSING THE BALL STUD TO WEAR THROUGH THE CONTROL ARM HOUSING RESULTING IN NOISE AND/OR SEPARATION OF THE BALL STUD FROM THE HOUSING.

Dec 24, 2010 – CHRYSLER IS RECALLING CERTAIN MODEL YEAR 2011 RAM 1500 TRUCKS MANUFACTURED FROM SEPTEMBER 2009 THROUGH DECEMBER 2010. SOME VEHICLES MAY HAVE EXPERIENCE A NOISE (GROWL, GRIND) COMING FROM THE REAR AXLE BEARING WHICH COULD EVENTUALLY SEIZE.