FERRARA Recalls

Mar 02, 2021 – Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2009-2020 Aerial vehicles equipped with a positional waterway trolley. If the operator attempts to both extend the ladder, and shift from one mode to the other at the same time, the locking tabs can be broken off the locking arms.

Sep 24, 2019 – Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2019 Inferno fire trucks equipped with independent front suspensions manufactured by Reyco Granning. The front shocks may separate from their upper mount on the front suspension. The loose shock may contact and damage the steering gear housing, possibly causing a steering fluid leak and a loss of power steering assist.

Sep 11, 2018 – Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2017-2019 Ferrara Inferno, Igniter, Cinder, Ultra, and Intruder emergency vehicles equipped with Whelen accessory brake lights. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."

Mar 14, 2018 – Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2004-2012 Inferno and Igniter emergency vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle.

Feb 05, 2018 – Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2015-2016 Inferno and International 4400, 2013-2016 Igniter, 2014-2017 Cinder and Freightliner M2 106, 2013-2014 Ember and 2013-2017 Kenworth T370 fire-fighting vehicles, equipped with Hale pressure relief valves in the water pumps used for fire fighting. Rings securing the valves may corrode over time after exposure to water, causing the ring to fail and the pressure relief valve to open, reducing the water pressure available for fire fighting.

May 18, 2017 – Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain 2000-2016 Fire Apparatus 100' Rear Mount Platform emergency vehicles. The affected vehicles are equipped with a movable ladder access guardrail that may bend or break under heavy loads.

Aug 04, 2016 – Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2015-2016 Inferno, Igniter, Intruder and Cinder fire trucks built on Freightliner and International chassis manufactured April 13, 2015, to May 30, 2016. The affected vehicles may be equipped with certain C20 and C21 split-shaft transmissions from Waterous. This transmission sends power to the wheels of an emergency response vehicle or powers an add-on unit such as a water pump used for fighting fires. A component within the shift unit may be damaged and as a result, the operator may not be able to switch the power output.

Jul 20, 2016 – Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2011-2016 Inferno, Igniter, Intruder, and Cinder emergency vehicles manufactured October 3, 2011, to May 31, 2016, equipped with Class 1 Ultraview Touchscreens manufactured by Hale Products. These touchscreens may experience false switch activations that can happen without the operator's knowledge causing accessories to turn on or off, affecting vehicle performance.

Jul 13, 2016 – Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2014-2016 Igniter vehicles manufactured January 1, 2014, to May 2, 2016, equipped with certain Class 1 ES-KEY power control modules manufactured by Hale Products. The affected power control modules may not provide sufficient circuit protection depending on their combination of software and installation, possibly resulting in a short circuit.

Jun 16, 2016 – Ferrara Fire Apparatus, Inc. (Ferrara) is recalling certain model year 2015-2016 Inferno, Igniter, Cinder, Ultra, and Intruder vehicles built on Freightliner and International chassis manufactured August 3, 2015, to April 29, 2016, equipped with pumps to provide pressurized water to aid in fighting fires. These pumps have 6" intake strainers that may have been improperly soldered during production and, as a result, the strainers may come apart during use, allowing parts of the strainer and debris to enter the pump, possibly damaging the pump.