GMC SAVANA Recalls

Mar 22, 2012 – GENERAL MOTORS (GM) IS RECALLING CERTAIN MODEL YEAR 2012 CHEVROLET EXPRESS AND SUBURBAN VEHICLES, AND GMC SAVANA AND YUKON XL HEAVY DUTY VEHICLES. THE STEERING GEAR PITMAN SHAFT MAY NOT HAVE BEEN ADEQUATELY HARDENED AND COULD FRACTURE.

Nov 08, 2011 – GM IS RECALLING CERTAIN MODEL YEAR 2012 CHEVROLET EXPRESS AND GMC SAVANA VEHICLES MANUFACTURED FROM JUNE 2, 2011, THROUGH OCTOBER 17, 2011. THE SECOND STAGE OF THE DUAL-STAGE AIR BAG WILL NOT INFLATE IN A SEVERE FRONTAL IMPACT. ACCORDINGLY, THE AIR BAGS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY NO. 208, "OCCUPANT CRASH PROTECTION."

May 06, 2011 – GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2011 CHEVROLET EXPRESS AND GMC SAVANA VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 135, "PASSENGER CAR BRAKE SYSTEMS." SOME OF THESE VEHICLES MAY HAVE BEEN BUILT WITH A CLEARANCE CONDITION IN WHICH THE RIGHT REAR BRAKE HOSE MAY CONTACT THE TIRE OR WHEEL RIM. IF THE BRAKE HOSE REPEATEDLY CONTACTS THE TIRE OR WHEEL RIM, A HOLE COULD BE WORN IN THE BRAKE HOSE.

Jan 06, 2011 – GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2011 CADILLAC ESCALADE, ESCALADE ESV, ESCALADE EXT; CHEVROLET AVALANCHE, COLORADO, EXPRESS, SILVERADO, SUBURBAN, TAHOE; AND GMC CANYON, SIERRA, SAVANA, YUKON AND YUKON XL VEHICLES. THE REAR AXLE CROSS PINS WERE NOT PROPERLY HEAT TREATED AND COULD FRACTURE AND BECOME DISPLACED WITHIN THE REAR AXLE. SHOULD THE PIN SHIFT OUT OF POSITION, IT COULD CREATE AN INTERFERENCE CONDITION AND CAUSE THE REAR AXLE TO LOCK.

May 13, 2010 – MAIN MOBILITY IS RECALLING CERTAIN MODEL YEAR 2008 AND 2009 CONVERSION VANS BUILT ON CHEVROLET EXPRESS AND GMC SAVANA CHASSIS FROM OCTOBER 2007 THROUGH MAY 2010 AND FITTED WITH CERTAIN RICON S SERIES AND K SERIES L-MODEL WHEELCHAIR LIFTS. DUE TO A PROBLEM IN THE SOFTWARE THAT CONTROLS THE LIFT'S "UP" FUNCTION, SHOULD THE "UP" BUTTON BE RELEASED BEFORE THE FLOOR LEVEL LIMIT SWITCH IS ACTIVATED, THE LIFT MAY CONTINUE ITS UPWARD TRAVEL AND MAY OVERRUN THE FLOOR LEVEL CUT OFF POINT.

Apr 06, 2010 – GENERAL MOTORS HAS NOTIFIED NHTSA OF A DEFECT IN CERTAIN MODEL YEAR 2010 CHEVROLET EXPRESS AND GMC SAVANA VANS 2500, 3500 AND 4500 SERIES. SOME OF THESE VEHICLES HAVE A CONDITION IN WHICH THE GENERATOR MAY DEVELOP A LOW RESISTANCE SHORT WITHIN THE VOLTAGE REGULATOR.

Mar 12, 2010 – GENERAL MOTORS IS RECALLING CERTAIN MODEL YEAR 2009-2010 CHEVROLET EXPRESS AND GMC SAVANA VEHICLES FOR FAILING TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 103, "WINDSHIELD WIPING AND WASHING SYSTEMS." THESE VEHICLES WERE BUILT WITH HEATING, VENTILATION, AND AIR CONDITIONING (HVAC) CONTROL KNOBS THAT MAY FRACTURE AND SPIN ON THE CONTROL SHAFT. THE DRIVER MAY NO LONGER BE ABLE TO CONTROL THE HEATING, COOLING, AND VENTILATION FOR THE VEHICLE.

Jul 06, 2009 – MAIN MOBILITY IS RECALLING 185 MODEL YEAR 2005 THROUGH 2009 CHEVROLET EXPRESS AND GMC SAVANA VANS MANUFACTURED BETWEEN APRIL 1, 2005 AND JUNE 25, 2009, EQUIPPED WITH RICON PLATFORM STYLE WHEELCHAIR LIFTS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 404, "PLATFORM LIFT INSTALLATIONS IN MOTOR VEHICLES." THE THRESHOLD WARNING SYSTEM MAY NOT DETECT THE PRESENCE OF A WHEELCHAIR OR MOBILITY AID USER IN A CERTAIN SPOT WITHIN THE DEFINED THRESHOLD AREA.

Jul 06, 2009 – MAIN MOBILITY IS RECALLING 185 MODEL YEAR 2005 THROUGH 2009 CHEVROLET EXPRESS AND GMC SAVANA VANS MANUFACTURED BETWEEN APRIL 1, 2005 AND JUNE 25, 2009, EQUIPPED WITH RICON PLATFORM STYLE WHEELCHAIR LIFTS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 403, "PLATFORM LIFT INSTALLATIONS IN MOTOR VEHICLES." THE ANTI-STOW INTERLOCK MAY NOT DETECT THE PRESENCE OF A WHEELCHAIR OR MOBILITY AID USER. THE PRESSURE SENSING SWITCH THAT DETECTS THE PRESENCE OF WEIGHT ON THE PLATFORM WAS NOT ADJUSTED TO THE NECESSARY SENSITIVITY LEVEL. THE LIFT COULD STOW EVEN THOUGH SOMEONE OR SOMETHING IS STILL ON THE LIFT.

Apr 07, 2009 – SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.