INTERNATIONAL HARVESTER 4700 Recalls

Jun 03, 2004 – ON CERTAIN SCHOOL BUSES AND TRUCK MODEL VEHICLES MANUFACTURED BETWEEN FEBRUARY 28, 1999, THROUGH APRIL 5, 2004, THE ANTI-LOCK BRAKE SYSTEM ELECTRONIC CONTROL UNIT (ECU) MAY MISINTERPRET A CORRUPT WHEEL SPEED SIGNAL.

Apr 03, 2003 – ON CERTAIN HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL.

Mar 06, 2003 – ON CERTAIN HEAVY DUTY TRUCKS EQUIPPED WITH BOSTROM DRIVER SEAT MODELS 910, 910SC, OR 914 AND INTERNATIONAL'S PARKING BRAKE CODE 04036, IF SOMEONE OUTSIDE THE CAB ADJUSTS/SLIDES THE DRIVER'S SEAT TO ITS MOST FORWARD POSITION, WITH THE PARKING BRAKE SET, THE SEAT WILL CONTACT AND RELEASE THE PARKING BRAKE LEVER.

Feb 25, 2003 – ON CERTAIN SCHOOL AND TRANSIT BUSES BUILT WITH BOSCH ZERO OFFSET PIN SLIDE (ZOPS) HYDRAULIC DISC BRAKES, THE ZOPS HYDRAULIC DISC BRAKES MAY EXPERIENCE CALIPERS STICKING IN THE APPLIED POSITION, WHICH CAN RESULT IN EXCESSIVE OR ABNORMAL HEAT GENERATION AT ONE OR MORE OF THE BRAKES.

May 20, 2002 – ON CERTAIN MEDIUM AND HEAVY DUTY TRUCKS, A BRASS FITTING CONNECTS THE DOUBLE CHECK VALVE TO THE BRAKE RELAY VALVE. WITH CERTAIN INPUTS TO THE VEHICLE, THE WEIGHT OF THE CHECK VALVE ON THE FITTING CAN CAUSE THE ASSEMBLY TO RESONATE. THE SUBJECT VIBRATION CAN CAUSE EXCESSIVE STRAIN LEVELS IN THE FITTING, WHICH COULD EVENTUALLY FATIGUE AND FAIL.

Mar 26, 2001 – VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH BOSTROM DRIVER SEAT MODELS (910, 910SC, OR 914) AND INTERNATIONAL'S PARKING BRAKE CODE 04036. IF SOMEONE OUTSIDE THE CAB ADJUSTS/SLIDES THE DRIVER'S SEAT TO ITS MOST FORWARD POSITION, WITH THE PARKING BRAKE SET, THE SEAT WILL CONTACT AND RELEASE THE PARKING BRAKE LEVER.

Dec 06, 2000 – VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS. THE VEHICLES INVOLVED IN THIS RECALL WERE BUILT FOR EXPORT WITH MANUAL SLACK ADJUSTERS AND WERE SOLD IN THE US. THESE VEHICLES NEED TO HAVE AUTOMATIC SLACK ADJUSTERS IN ORDER TO COMPLY WITH THE REQUIREMENTS OF FMVSS 121, "AIR BRAKE SYSTEMS."

Sep 26, 2000 – VEHICLE DESCRIPTION: TRUCKS EQUIPPED WITH ALLISON 1000 OR 2400 SERIES TRANSMISSIONS. THESE TRANSMISSIONS CAN EXPERIENCE PARK PAWL TO REAR COVER INTERFERENCE DUE TO AN OUT OF FLATNESS CONDITION.

May 23, 2000 – VEHICLE DESCRIPTION: SCHOOL/TRANSIT BUSES AND MEDIUM DUTY TRUCKS. THE CASTINGS USED ON THE POWER STEERING PUMPS WERE NOT BUILT TO MATCH THE ENGINEERING DRAWINGS, RESULTING IN A THIN WALL IN THE PUMP CASTING OR A COMPLETE CONNECTION OF TWO PASSAGES THAT ARE SUPPOSED TO BE SEPARATED TO CONTROL FLUID FLOW. THE FLUID FLOW MAY BE REDUCED TO LESS THAN THE MINIMUM REQUIRED FLOW RATE TO PROVIDE FULL POWER ASSIST TO THE BRAKE SYSTEM WITH LOW ENGINE SPEED.

Nov 27, 1996 – VEHICLE DESCRIPTION: SCHOOL BUSES AND HEAVY DUTY TRUCKS EQUIPPED WITH REAR AXLE ASSEMBLIES PRODUCED BY DANA SPICER. CERTAIN REAR AXLE ASSEMBLIES WERE IMPROPERLY HEAT TREATED WHICH COULD ALLOW PINION BREAKAGE AT THE PINION THREADS.