NOVABUS Recalls

Feb 01, 2007 – ON CERTAIN TRANSIT BUSES EQUIPPED WITH DETROIT DIESEL SERIES 50 ENGINES, THE ELECTRONIC CONTROL MODULE (ECM) WILL NEED TO BE REPROGRAMMED TO ACTIVATE THE EXHAUST TEMPERATURE SENSOR.

Feb 28, 2005 – ON CERTAIN TRANSIT BUSES EQUIPPED WITH ARVINMERITOR URRESKO TIE ROD CLAMPS, HEAT TREATMENT OF CLAMPS CREATED A SURFACE HARDNESS THAT COULD LEAD TO A FRACTURE OF THE CLAMPS.

May 30, 2002 – CERTAIN TRANSIT BUSES WITH AN OPTION FOR DECELERATION LIGHTS DO NOT MEET ALL THE REQUIREMENTS OF FMVSS NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THE DECELERATION LIGHTS ARE LOCATED ON THE REAR CENTER OF THE BUS, ABOVE THE REAR ENGINE DOOR. THEY ARE PROVIDED AS A MEANS OF ALERTING VEHICLES TRAVELING BEHIND THE BUS THAT IT IS SLOWING DOWN AND MAY BE PREPARING TO STOP. ALSO, THE DRIVER ACTIVATED, FLASHING HOODLUM LIGHTS, IS TO ALERT THE PUBLIC/POLICE TO A DANGEROUS SITUATION OCCURRING IN THE BUS FOR WHICH THE DRIVER REQUIRES ASSISTANCE. TWO OF THESE LIGHTS ARE LOCATED ON THE FRONT OF THE BUS AT EACH END OF THE DESTINATION SIGN AND TWO AT THE REAR OF THE BUS BELOW THE LEVEL OF THE ROOF MARKER LIGHTS. THEY FLASH IN AN ALTERNATING PATTERN FROM SIDE TO SIDE. THE STANDARD REQUIRES THAT THESE LAMPS SHALL BE WIRED TO BE STEADY BURNING.

Oct 09, 2001 – VEHICLE DESCRIPTION: BUSES EQUIPPED WITH ADHESIVELY BONDED ALUMINUM BUS DOOR PANELS USED IN PASSENGER DOORWAYS ON TRANSIT AND LIGHT AND MEDIUM DUTY BUSES SUPPLIED BY VAPOR CORPORATION. DUE TO AN IMPERFECT BONDING OF THE DOOR PANEL SKIN TO THE PANEL FRAME, ENVIRONMENTAL MOISTURE MAY INFILTRATE REGIONS OF IMPERFECT BONDING AND CAUSE SEPARATION OF THE FRAME AND DOOR PANEL.

Oct 09, 2001 – VEHICLE DESCRIPTION: BUSES EQUIPPED WITH ELECTRONIC THROTTLE CONTROL/ACCELERATOR PEDALS SUPPLIED BY WILLIAMS CONTROLS INDUSTRIES. THE WELD ATTACHING THE CLEVIS TO THE PLATE HAS INSUFFICIENT PENETRATION AND COULD ALLOW THE CLEVIS TO SEPARATE FROM THE PLATE.

Aug 01, 2001 – VEHICLE DESCRIPTION: TRANSIT BUSES EQUIPPED WITH ARVINMERITOR "W-SERIES" AIR-ACTUATED BRAKE CAM ROLLERS. THESE ROLLERS WERE INSTALLED AS ORIGINAL EQUIPMENT AND ALSO SOLD AS REPLACEMENT PARTS. THE AFFECTED BRAKE ROLLERS MAY FRACTURE IF SUBJECTED TO HIGH APPLICATION LOADINGS.

Jul 01, 1999 – VEHICLE DESCRIPTION: 40 FOOT TRANSIT BUSES EQUIPPED WITH MERITOR REAR CAM BRAKES AND HALDEX AUTOMATIC SLACK ADJUSTERS AND SOLD TO NEW YORK CITY TRANSIT AUTHORITY. THE SLACK ADJUSTERS CAN CRACK.

Jan 09, 1997 – VEHICLE DESCRIPTION: BUSES EQUIPPED WITH ISRINGHAUSEN SEATS IN THE DRIVER POSITION. TWO WELDS LOCATED ON THE BACK REST ADJUSTMENT SIDE OF THE SEAT FRAME DID NOT MEET THE MANUFACTURER'S SPECIFICATIONS.