SUZUKI GRAND VITARA Recalls

Aug 30, 2004 – ON CERTAIN PASSENGER VEHICLES, UNDER AMBIENT TEMPERATURES BELOW -25 DEGREES CELSIUS, MOISTURE CAN FREEZE IN THE FUEL PRESSURE REGULATOR. AS A RESULT, FUEL SYSTEM PRESSURE MAY INCREASE AT THE TIME OF ENGINE START UP, CAUSING FUEL LOSS AT THE FUEL PIPE/FUEL HOSE CONNECTION.

Dec 05, 2003 – ON CERTAIN SPORT UTILITY VEHICLES, THE ACCELERATOR CABLE CASING CAP THAT IS ATTACHED TO THE VEHICLE FIREWALL CAN CRACK DUE TO EXTENDED EXPOSURE TO FORCES FROM THE ACCELERATOR CABLE AND INSUFFICIENT LONG-TERM DURABILITY OF THE PLASTIC CASING CAP. IF THE CASING CAP BECOMES CRACKED, MOVEMENT OF THE INNER ACCELERATOR CABLE THROUGH THE CAP CAN CAUSE THE INNER ACCELERATOR CABLE TO BECOME FRAYED.

Dec 02, 2003 – ON CERTAIN SPORT UTILITY VEHICLES, THE IGNITION SYSTEM WIRING HARNESS IS ROUTED UNDER THE INTAKE MANIFOLD. THE HARNESS CAN RUB AGAINST THE MANIFOLD DURING VEHICLE OPERATION AND ABRASION DAMAGE TO THE HARNESS CAN OCCUR.

Jun 16, 2003 – CERTAIN PASSENGER (111 MY 2002 ESTEEM, 777 MY 2002 AERIO, 2,368 MY 2003 AERIO) AND SPORT UTILITY (324 MY 2002 GRAND VITARA, 274 MY 2003 GRAND VITARA, 684 MY 2002 GRAND VITARA XL-7, AND 781 MY 2003 GRAND VITARA XL-7) VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 212, 'WINDSHIELD MOUNTING." THE WINDSHIELD MAY NOT BE PROPERLY SECURED TO THE VEHICLE BODY DUE TO INSUFFICIENT ADHESION BETWEEN THE PAINT APPLIED DURING THE SECOND-STAGE PAINTING PROCESS AND THE PAINT APPLIED DURING FINAL-STAGE PAINTING.

Apr 27, 2001 – VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. UNDER TEMPERATURES BELOW -25 DEGREES, MOISTURE CAN FREEZE IN THE FUEL PRESSURE REGULATOR. FUEL SYSTEM PRESSURE COULD INCREASE AT THE TIME OF ENGINE START UP, CAUSING FUEL LOSS AT THE FUEL PIPE/FUEL HOSE CONNECTION.

Mar 02, 2001 – VEHICLE DESCRIPTION: SOME SPORT UTILITY VEHICLES DO NOT COMPLY WITH THE CERTAIN REQUIREMENTS OF FMVSS NO. 120, "TIRE SELECTION AND RIMS FOR MOTOR VEHICLES OTHER THAN PASSENGER CARS." THE PRESENTATION OF SOME OF THE INFORMATION ON THE TIRE INFORMATION LABEL DEVIATES FROM THE FORMAT SET FORTH IN THE STANDARD AND THE LABEL MAY NOT BE "PERMANENTLY AFFIXED" AS REQUIRED BY THE STANDARD.

Dec 26, 2000 – EQUIPMENT DESCRIPTION: STEEL REPLACEMENT WHEELS, PART NO. 4310-665D21-27S, USED FOR SPARE PARTS ON 1999-2001 SUZUKI GRAND VITARA AND 2001 SUZUKI GRAND VITARA XL-7 MULTIPURPOSE PASSENGER VEHICLES. THE AFFECTED WHEELS WERE PRODUCED FROM JULY 30 THROUGH SEPTEMBER 20, 2000. THE THICKNESS OF THE STEEL WHEEL INBOARD OF THE AREA WHERE THE WHEEL RIM IS WELDED TO THE WHEEL DISK IS LESS THAN THE DESIGN SPECIFICATION.