SUZUKI GSX1300R Recalls

Oct 16, 2024 – Suzuki Motor USA, LLC (Suzuki) is recalling certain 2022-2024 GSX1300R (Hayabusa) motorcycles. The master cylinder internal rubber components may swell due to contamination from the brake fluid cap diaphragm, which can result in a blocked brake fluid port. As such, these motorcycles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 122, "Motorcycle Brake Systems."

Jan 23, 2024 – Suzuki Motor USA, LLC (Suzuki) is recalling certain 2024 GSX1300R motorcycles. The brake fluid pipe flare nut for the brake fluid supply line may have been tightened incorrectly and cause a brake fluid leak.

Feb 15, 2023 – Suzuki Motor USA, LLC (Suzuki) is recalling certain 2022 GSX1300RRQ/ZM2 (Hayabusa) motorcycles. An incorrect position of the front brake master cylinder primary port could cause the port to become blocked, and result in a gap between the front brake pad and discs. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 122, "Motorcycle Brake Systems."

Jan 19, 2016 – Suzuki Motor of America, Inc. (Suzuki) is recalling certain model year 2008-2012 AN400, AN400A, DL1000, GSX1300R, 2008-2009 GSF1250S and GSF1250SA, 2008 GSX1300BK and GSX1300BKA, 2008-2010 GSX650F, GSX-R600, GSX-R750, VLR1800, VLR1800T, and 2009-2010 SFV650 and VZ1500 motorcycles. Due to a problem with the circuit board for the regulator/rectifier power module, the motorcycle may not sufficiently charge the battery and the motorcycle may stall.

Apr 01, 2014 – Ohlins Racing AB (Ohlins) is recalling certain steering dampers kits manufactured with an incorrectly machined bracket. These dampers were sold for use as aftermarket equipment on Yamaha R1, R6, and FZ6, Suzuki TL1000 R and GSX1300R, Honda CB600RR, and Ducati Monster 1000, 748, 848, 916, 996, and 998 motorcycles. Also included are universal steering damper kits with part numbers SD 000 through SD 005. The affected brackets may crack.

Feb 23, 2011 – SUZUKI IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2010 MOTORCYCLES MANUFACTURED FROM JULY 2007 THROUGH SEPTEMBER 2009, EQUIPPED WITH REGULATOR/RECTIFIER ASSEMBLIES, SUZUKI PART NUMBERS 32800-41F11, 32800-15H10, 32800-05H11, 32800-41G10, 32800-15H00, 32800-18H00, 32800-05G10, 32800-10G10, 32800-05H20, OR 32800-06G01. SOME REGULATOR/RECTIFIER ASSEMBLIES WERE PRODUCED WITH INSUFFICIENT ADHESION BETWEEN THE POWER MODULE (CIRCUIT BOARD) AND THE RECTIFIER CASE THAT CONTAINS A HEAT SINK TO DISSIPATE HEAT. DUE TO INSUFFICIENT ADHESION, HEAT GENERATED ON THE POWER MODULE CIRCUIT BOARD CAN CAUSE THE CIRCUIT BOARD TO DEFORM, AND LIFT OF THE CASE.

Aug 15, 2008 – MOTION PRO IS RECALLING 10,000 AFTERMARKET BRAKE LEVERS, MODEL NO. 14-0415, SOLD FOR USE ON CERTAIN MY 1999 THROUGH 2008 SUZUKI AND MY 1998 THROUGH 2003 YAMAHA MOTORCYCLES. THE LOBE HEIGHT ON SOME OF THESE LEVERS ARE SMALLER AND DO NOT PROPERLY ENGAGE THE STOMP LAMP SWITCH WHICH WILL NOT DEACTIVATE WHEN THE DRIVER RELEASES THE BRAKE LEVER. THE LEVER CAN BE IDENTIFIED BY THE MARKING "JY 378" AT THE BASE OF THE LEVER NEAR THE PIVOT BUSHING.

Oct 11, 2000 – VEHICLE DESCRIPTION: ON CERTAIN MOTORCYCLES, THE SPRING IN THE CAM CHAIN TENSION ADJUSTER CAN BREAK. EXCESSIVE SLACK WILL DEVELOP IN THE CAM CHAIN, ALLOWING THE CHAIN TO JUMP TO THE WRONG POSITION ON THE CAM SHAFT SPROCKETS.

Oct 12, 1999 – VEHICLE DESCRIPTION: MOTORCYCLES. THE SPRING IN THE CAM CHAIN TENSION ADJUSTER CAN BREAK ALLOWING THE CAM CHAIN TO JUMP TO THE WRONG POSITION ON THE CAM SHAFT SPROCKETS. IF THE CHAIN JUMPS TO THE WRONG POSITION, SEVERE ENGINE DAMAGE COULD OCCUR CAUSING SUDDEN ENGINE FAILURE.