TOYOTA CAMRY Recalls

Nov 13, 2014 – Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2011 Toyota Camry vehicles manufactured March 8, 2011, to July 20, 2011. In the affected vehicles, the rubber boot on the front suspension lower arm ball joint may have been damaged during manufacturing. The damage could cause the boot to leak lubricant grease which could then cause the ball joint to wear and loosen prematurely.

Nov 07, 2014 – Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Toyota Camry, Camry HV, Avalon, and Avalon HV vehicles equipped with 16-inch and 17-inch rims. In the affected vehicles, the left-side front suspension lower arm may have been incorrectly manufactured. As a result, the left side lower arm may not have enough clamping surface area for one of the bolts that secures the lower arm to the lower ball joint.

Sep 19, 2014 – Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014 Toyota Avalon, Camry, Sienna, and Highlander and model year 2015 Lexus RX350 vehicles. Fuel may leak from the one of the fuel delivery pipes in the engine compartment.

Oct 17, 2013 – Toyota is recalling certain model year 2012-2013 Avalon, Avalon HV, Venza, Camry, and Camry HV vehicles. In the affected vehicles, the drain hose for the air conditioning condenser may become clogged causing water to accumulate at the bottom of the air conditioning condenser unit housing. The accumulated water may then leak through a seam in the housing onto the air bag control module potentially resulting in a short circuit of the module.

Oct 17, 2013 – Toyota Motor Engineering & manufacturing North America, Inc. (Toyota) is recalling certain model year 2013-2014 Camry and Camry HV, model year 2013 Avalon and Avalon HV and model year 2014 Corolla vehicles. In the affected vehicles, the windshield wiper switch assembly may short circuit. As such, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard, No. 104, "Windshield Wiping and Washing Systems."

Apr 09, 2013 – Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota Tacoma, 2011-2012 Toyota Sienna, 2012 Toyota Prius, 2013 Scion FR-S, 2011 Scion XD, 2011 Scion XB, and 2012 Scion TC vehicles. These vehicles were sold with labels that were outside the allowable one percent of accuracy of actual weight added. Thus, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) Number 110, "Tire Selection and Rims."

Jan 16, 2013 – Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed.

Oct 10, 2012 – Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.

Mar 07, 2012 – TOYOTA IS RECALLING CERTAIN MODEL YEAR 2009 CAMRY VEHICLES MANUFACTURED FROM JULY 1, 2008, THROUGH FEBRUARY 28, 2009, AND MODEL YEAR 2009-2011 VENZA VEHICLES MANUFACTURED FROM OCTOBER 20, 2008, THROUGH JANUARY 4, 2011. DURING ASSEMBLY OF THE CONTACT-TYPE STOP LAMP SWITCH, SILICONE GREASE MAY HAVE COME IN CONTACT WITH THE SURFACE OF THE SWITCH WHICH COULD CAUSE CONTACT RESISTANCE. IF THIS OCCURS, WARNING LAMPS COULD ILLUMINATE, A NO START CONDITION COULD RESULT, THE SHIFT LEVER MAY NOT SHIFT FROM THE ?PARK? POSITION, OR THE VEHICLE?S BRAKE LIGHTS COULD BECOME INOPERATIVE.

Nov 09, 2011 – TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004 AVALON VEHICLES; 2004 AND 2005 CAMRY, CAMRY SOLARA, HIGHLANDER, AND SIENNA VEHICLES, 2006 HIGHLANDER HYBRID; 2004 AND 2005 LEXUS ES330 AND RX330; AND 2006 LEXUS RX400H VEHICLES MANUFACTURED FROM JUNE 1, 2004 THROUGH MARCH 31, 2005, EQUIPPED WITH THE 1MZ-FE OR 3MZ-FE ENGINE. THE AMOUNT OF ADHESIVE AGENT APPLIED BETWEEN THE OUTER RING AND THE TORSIONAL RUBBER DAMPER (INNER RING) IN THE CRANKSHAFT PULLEY MAY BE INADEQUATE. IF THE ADHESIVE IS INSUFFICIENT, THERE IS A POSSIBILITY THAT THE OUTER RING MAY BECOME MISALIGNED AND IT MAY NOT PROPERLY ROTATE WITH THE INNER RING, CAUSING NOISE AND/OR ILLUMINATION OF THE BATTERY DISCHARGE INDICATOR LIGHT.