TOYOTA SIENNA Recalls

Nov 30, 2011 – TOYOTA IS RECALLING CERTAIN MODEL YEAR 2011 THROUGH 2012 SIENNA VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NUMBER 110, "TIRE SELECTIONS AND RIMS." THESE VEHICLES DO NOT MEET THE REQUIREMENT FOR DISPLAYING THE CORRECT VEHICLE CAPACITY WEIGHT AS THE RATED LOAD FOR THE COMBINATION OF CARGO AND OCCUPANTS.

Nov 22, 2011 – SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2010-2011 COROLLA VEHICLES EQUIPPED WITH A NON-TOYOTA, BLUE TOOTH HANDS FREE DEVICE OR NAVIGATION UNIT AND CERTAIN MODEL YEAR 2011 TOYOTA SIENNA VEHICLES EQUIPPED WITH A NON-TOYOTA, OVERHEAD ENTERTAINMENT SYSTEM AND/OR BLUETOOTH HANDS FREE DEVICE. THERE IS A POSSIBILITY THAT THE FRONT A-PILLAR TRIM PANEL RETENTION CLIP MAY HAVE BEEN DAMAGED DURING THE INSTALLATION OF THE AFTERMARKET ACCESSORY.

Nov 09, 2011 – TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004 AVALON VEHICLES; 2004 AND 2005 CAMRY, CAMRY SOLARA, HIGHLANDER, AND SIENNA VEHICLES, 2006 HIGHLANDER HYBRID; 2004 AND 2005 LEXUS ES330 AND RX330; AND 2006 LEXUS RX400H VEHICLES MANUFACTURED FROM JUNE 1, 2004 THROUGH MARCH 31, 2005, EQUIPPED WITH THE 1MZ-FE OR 3MZ-FE ENGINE. THE AMOUNT OF ADHESIVE AGENT APPLIED BETWEEN THE OUTER RING AND THE TORSIONAL RUBBER DAMPER (INNER RING) IN THE CRANKSHAFT PULLEY MAY BE INADEQUATE. IF THE ADHESIVE IS INSUFFICIENT, THERE IS A POSSIBILITY THAT THE OUTER RING MAY BECOME MISALIGNED AND IT MAY NOT PROPERLY ROTATE WITH THE INNER RING, CAUSING NOISE AND/OR ILLUMINATION OF THE BATTERY DISCHARGE INDICATOR LIGHT.

Jun 01, 2011 – TOYOTA IS RECALLING CERTAIN MODEL YEAR 2011 VENZA AND SIENNA PASSENGER CARS MANUFACTURED FROM MARCH 7, THROUGH MARCH 10, 2011. THERE IS A POSSIBILITY THAT THE FRONT, RIGHT, DRIVE SHAFT MAY BREAK DUE TO INSUFFICIENT HEAT TREATMENT.

Dec 13, 2010 – TOYOTA IS RECALLING CERTAIN MODEL YEAR 2011 SIENNA VEHICLES. THE BRAKE STOP LAMP SWITCH IS MOUNTED ON A SMALL BRACKET WELDED ON THE LEFT SIDE OF THE SERVICE BRAKE PEDAL SUPPORT ASSEMBLY. DUE TO ITS PROXIMITY TO THE PARKING BRAKE PEDAL, IN LIMITED CIRCUMSTANCES THE STOP LAMP SWITCH BRACKET COULD BE DAMAGED BY THE OPERATOR'S FOOT DURING PARKING BRAKE APPLICATION.

Jun 17, 2010 – ACCESS OPTIONS IS RECALLING CERTAIN TRUCKS AND VANS BUILT ON FORD E150, E350, TOYOTA SIENNA, AND DODGE GRAND CARAVAN CHASSIS AND EQUIPPED WITH VMI/RICON 6-WAY POWER SEAT BASES. THE SIX WAY POWER SEAT BASE MAY HAVE A DEFECTIVE (COLD) WELD ON THE PIVOT PIN WHICH IS WELDED TO THE SWIVEL PLATE. THE WELD COULD FAIL.

Apr 20, 2010 – TOYOTA IS RECALLING CERTAIN MODEL YEAR 1998 THROUGH 2010 SIENNA PASSENGER VEHICLES MANUFACTURED BETWEEN AUGUST 7, 1997 AND JANUARY 4, 2010, CURRENTLY REGISTERED IN OR ORIGINALLY SOLD IN CONNECTICUT, DELAWARE, ILLINOIS, INDIANA, KENTUCKY, MAINE, MARYLAND, MASSACHUSETTS, MICHIGAN, MINNESOTA, NEW HAMPSHIRE, NEW JERSEY, NEW YORK, OHIO, PENNSYLVANIA, RHODE ISLAND, VERMONT, WASHINGTON DISTRICT OF COLUMBIA, VIRGINIA, WEST VIRGINIA, AND WISCONSIN. THE SUBJECT VEHICLES ARE EQUIPPED WITH THE SPARE TIRE STOWED UNDER THE VEHICLE. IF THE VEHICLE IS OPERATED IN THE COLD CLIMATE REGIONS OF THE UNITED STATES WHERE ROAD SALT IS FREQUENTLY USED, WATER SPLASHED BACKWARDS WITH HIGH CONCENTRATIONS OF ROAD SALT CAN REACH THE SPARE TIRE CARRIER AND CORRODE THE SPARE TIRE CARRIER ASSEMBLY CABLE.

Feb 03, 2010 – GULF STATES TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.

Feb 03, 2010 – SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2011 PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.

Jun 25, 2009 – TOYOTA IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2009 SIENNA AND 2009 LEXUS GX PASSENGER VEHICLES. THE VEHICLE CAPACITY WEIGHT ON THE TIRE AND LOADING INFORMATION LABEL AND THE GVWR ON THE CERTIFICATION LABEL IS INSUFFICIENT FOR CERTAIN VEHICLES. SOME VEHICLES WERE ACCESSORIZED THROUGH VEHICLE PROCESSING CENTERS AND HAD ACCESSORIES INSTALLED THAT CAUSED THE VEHICLE TO EXCEED THE GVWR VALUE. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO 110, "TIRE SELECTION AND RIMS," AND 49 CFR PART 567.