2017 CHRYSLER PACIFICA Complaints

The contact owns a 2017 Chrysler Pacifica. The contact stated that the check engine warning light was displayed on the instrument panel soon after the vehicle was purchased. An independent mechanic replaced the EVAP purge valve, but after the repair, the power steering assist failed, and several unknown warning lights were illuminated. A mobile mechanic attempted to clear the codes, but the power steering failure persisted. The vehicle was then towed back to the independent mechanic, where a diagnostic test provided several fault codes, including electrical, ABS, brakes, traction control, rack and pinion, and the check engine warning light was displayed. The vehicle remained with the mechanic unrepaired. The dealer and manufacturer were notified of the failure but provided no assistance. The failure mileage was 107,000.

The contact owned a 2017 Chrysler Pacifica. The contact stated that while the vehicle was parked at the residence and unoccupied for over 24 hours, the contact's son smelled smoke, looked out the bedroom window, and observed flames coming from the tailgate and the rear of the vehicle. The contact's son notified 911, and the fire department responded and extinguished the fire. A police report was not filed. The vehicle was towed to Next Gear Auto Sales (Easton, PA). The vehicle was destroyed. The vehicle was not insured. The manufacturer was not notified of the failure. The failure mileage was unknown.

Steering is sticking on curves, creating a hazardous condition. Condition comes and goes

The contact's girlfriend owns a 2017 Chrysler Pacifica. The contact stated that while his girlfriend was attempting to open the rear passenger’s side sliding door, the door detached from the track. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 44,450.

The electric power steering intermittently sticks when the steering wheel is returned toward center after a turn. When this occurs, the wheel does not return to center on its own and requires noticeably increased effort to move. When the resistance releases, the wheel moves abruptly. Our local mechanic at Ashburn Auto Care reproduced the issue and he described it as “violently snapping back” The vehicle is available for inspection upon request. This regularly occurs at over 35 mph or so on highway curves and off-ramps all and has happened approximately 20 times since I first noticed it in July of this year. It seems to occur most often when coasting to the right and then pulling back towards center. Several times, it has caused me or my wife to oversteer and requires us to quickly react in order not to hit another car or leave the road. This is a family vehicle that regularly carries children. No warning lamps or messages appeared before or during these events. There are no diagnostic trouble codes stored. The problem has been reproduced by our independent mechanic but no solutions were provided. Our next step is to visit the dealer but I wanted to document the problem here before I do.

The contact owns a 2017 Chrysler Pacifica. The contact stated that while driving at an undisclosed speed and approaching a red light, the vehicle stalled. The vehicle was pulled over to the side of the road, shifted into park, and shifted back into drive, and the vehicle returned to normal operation. The message "Shift into Park" was displayed on the instrument panel. The failure had occurred on several occasions. The vehicle was taken back to the residence. The contact researched and became aware of a recall; however, the VIN was not under recall. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 145,000.

The contact owns a 2017 Chrysler Pacifica. The contact stated that the steering wheel was sticking intermittently while turning, causing the steering wheel to overcorrect after being turned. The TPMS warning light was illuminated. The local dealer was not contacted. The vehicle had not been diagnosed or repaired. The manufacturer was not contacted. The approximate failure mileage was 127,000.

The car has developed an unsmooth turning sensation that I noticed at highway speeds causing over / understeering curve turning. It is gradually becoming worse over the last few months, but it is not a daily driven vehicle, maybe once a week or so.

At speeds between 20-80mph, the steering wheel sticks while turning to the right. I have to force it to come back to center after the turn. It does not do this all the time but has become more frequent lately. As yet, it does not do this while turning to the left.

I have had this happen twice in the last few months, most recently in the last three weeks. I was driving on a 45 mph highway with the cruise control set at 49 or 50 miles per hour. On the most recent time, I was coming to a red traffic light and applied the break to slow down. However, the van kept going forward even though I was pressing the break pedal totally down. The van slowed somewhat, but the van kept going. I put the van in neutral and was able to stop, but the engine kept going, presumably at the speed set on the cruise control. I stopped the engine By putting the vehicle in Lo, which I believe shut off the engine. By that time I was partly in the intersection. Luckily I had no cars in front of me or behind me, and no one was crossing in front of me. Otherwise I would have had a collision. I called and made an appointment at my dealership, [XXX] on XXX. They test drove the van but couldn't duplicate the concern. According to the Invoice, they "Captured VSR No DTCS related to concern. Checked for sofware updates, None related to concern. Checked for SBS or star cases related to concern. None found." The summary concluded:" System is operating as designed at this time. Updated TCM, BCM and PLGM." I don't know what all of that means, but I think that they did a thorough inspection of my van and couldn't find out what was causing the Cruise Control to not shut off. I did some research online and I found that there were 2 recalls in 2018 for the 2017 and 2018 Chrysler Pacifica that appear to have attempted to correct this exact issue, but it showed that my vehicle, with my VIN, was covered by FCA Safety Recall U64, NHTSA 18V-332 and the recall status showed that my vehicle was "Repaired." Has anyone else had this problem, because this creates a very scary, dangerous event. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)