2017 CHRYSLER PACIFICA Complaints

The steering "sticks" and it is hesitant to pull back to center. It feels like the power steering just stops working for a couple seconds. This problem happens frequently...to the point that I am hesitant to drive the van. I get alerts for the electronic stabilization service, but when they pull the codes there are no issues to fix. I have had the vacuum pump and battery replaced (which I was told might correct the problem) but neither fixed the issue. After an internet search, I have found that this seems to be a problem with many 2017 and 2018 Pacifica models. There was one complaint that said to include NHTSA CAMPAIGN NUMBER: PE25009 in any complaints made to the NHTSA.

The contact owns a 2017 Chrysler Pacifica. The contact stated that on several occasions while driving and turning the steering wheel to the right, the steering wheel locked up and failed to return to center. The contact grabbed the steering wheel aggressively and turned it to return to center. The vehicle was taken to an independent mechanic; however, the failure was not duplicated. The manufacturer was not notified of the failure. The failure mileage was approximately 24,000.

The backup camera does not work 9 out of 10 times. Sometimes the screen is a blank blue, purple, or black screen. Sometimes its a frozen picture and Sometimes it flickers like a broken tv. Has been happening for a couple month now. Have not had it looked at yet because of costs involved with going to a dealer.

Electric power steering sticking while navigating an curve or turn in the road. Whether at slow speeds or fast speeds seems like my steering sticks everytime now. I've had my front end replaced previously for maintenance at 100000 when this originally started. And it seemed to help some but the batteries seem to fail atleast twice a year the aux battery and the main battery and then the steering goes off and over corrects "kicks back on" when you have to pry it out of getting "stuck"

The vehicle randomly but regularly experiences a grabbing in the steering when turning and requires a pulling on the steering wheel that then seems to overcorrect momentarily. This vehicle could be available for inspection upon request. I've taken it to my regular mechanic and he reproduced the problem and believes it is due to the steering rack or the electronic controls therein. No warning lamps or messages have ever displayed. I'm afraid that the overcorrection and/or lack of steering control could put the driver of our van and/or others nearby at risk.

Steering felt slightly stiff/stuck while driving on wide turns and straight on interstate. Going slower and making more frequent turns in town, steering felt normal but going fast there was a power steering concern. Not enough to make me jerk but I am worried that it will decline and force a hard jerk and possible swerving while going higher speeds. This is under investigation currently NHTSA CAMPAIGN NUMBER: PE25009. PLEASE PLEASE RECALL!! This was terrifying I have young children

When making steering corrections while driving over 55 miles an hour, the steering sticks and suddenly over corrects. This is especially troublesome when driving on winding two lane country roads. It feels like the vehicle might go into the oncoming traffic or off into the ditch.

Vehicle: 2017 Chrysler Pacifica Limited Gas (VIN: [XXX]) Component: Steering / Electrical Power Steering (EPS) Gear Rack Incident Description: I am filing this report in relation to active NHTSA Preliminary Evaluation PE25009 regarding the intermittent loss of electric power steering assist. While driving on curved roads, the steering system exhibits a distinct "sticky" or binding sensation during gradual, sustained turns. This mechanical resistance is highly localized and most noticeable when holding the steering wheel slightly off-center, specifically near the 11 o'clock and 1 o'clock positions. When attempting to exit a curve, the steering wheel fails to smoothly return to center on its own. It requires a deliberate, manual "nudge" or extra physical driver effort to break past the sticky threshold. Once this resistance is overcome, the Electric Power Steering (EPS) assist suddenly reactivates, creating a brief oversteer condition that requires immediate correction to keep the vehicle tracking safely in its lane. The behavior feels heavily tied to an internal electronic fault within the steering gear module rather than standard lane-keep assistance intervention, as the binding sensation persists even with safety features deactivated. This creates an unpredictable driving dynamic, particularly at highway speeds where subtle, precise inputs are required. Additionally, this vehicle has an extensive history of rapid battery failure, requiring multiple complete replacements of both the main and auxiliary batteries within consecutive 12-month periods. I suspect a systemic voltage drop or a compromised electrical ground circuit (potentially related to Chrysler Recall V53 / NHTSA 19V-348) may be concurrently affecting or accelerating the failure of the highly voltage-sensitive EPS rack assembly. The temporary binding of the steering infrastructure represents a clear, progressive safety defect. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

our 2017 Chrysler Pacifica Hybrid High Voltage (Hybrid) Battery pack experienced a failure. Check Engine Code P0A7F-00 active. The vehicle now refuses to charge the Hybrid Battery in any way other than using the on-board gas generator. The failed component is available for inspection and was reported to the local dealership. Originally the dealership advised the Battery Pack would be covered under TSB: 08-299-25. 3 weeks later they informed us Chrysler refused to replace the battery pack under the recall warranty. Recall warranty advised "Hybrid/EV Battery Pack "B" Deterioration was one of the check engine codes covered by the recall warranty. P0A7F-00 check engine code description is Hybrid/EV Battery Pack Deterioration. Check Engine light has been illuminated since the issue first appeared.

My 2017 Chrysler Pacifica Hybrid entered limp mode and was taken to Central Florida Chrysler Dodge on XXX. The service advisor, [XXX], identified three recalls, which needed to be completed, after claiming they had completed them, the issue persisted. I authorized a coolant flush without being informed it involved the battery cooling system. Further diagnostics revealed a failed hybrid battery. However, Chrysler denied the battery replacement claim, citing contamination from “incorrect” coolant. I dispute this reasoning, as I was not properly informed about the coolant issue and believe there is no proof that it caused the battery failure. Under the Magnuson-Moss Warranty Act, a warranty or recall claim cannot be denied without clear evidence linking the fluid to the failure. I have opened a case with Chrysler (Case #XXX) and am requesting that the battery replacement be honored under the recall, especially since recall guidelines indicate that unresolved issues after software updates may require component replacement. After a days of back and forth, not the dealership claims the PIM is not the original part of the vehicle and for that reason it would be covered under warranty. However the law is clear and Chrysler is obligated to replace it since this part is also part of the recall they claimed was completed. Now the dealer wants US$ 5K to replace the PIM. I need NHTSA to intervene please. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)