2017 CHRYSLER PACIFICA Complaints

Since 2019 there has been an intermittent issue with the steering. No warning or safety lights are on that would signify an issue. The steering wheel sticks when going through gentle curves on the road. Specifically when the steering wheel is in the 11:00 or 1:00 position. You can feel the steering stick and pull the vehicle slightly. By swiftly jerking the steering wheel in the opposite direction it seems to fix the issue. This happens at low and high speeds (back roads or highways). It is quite alarming and scary. We've taken it to multiple mechanics but they have been unsuccessful in figuring out the issue. They have been able to reproduce the issue but are unclear of what causes it.

Steering wheel sticks at lower speeds between 11-1 o’clock position (approximately) and requires extra force to turn the wheel. I came across number PE25009 which seems to clearly line up with what I am experiencing, so decided to report.

I have a 2017 Chrysler Pacifica minivan and I am experiencing intermittent steering wheel sticking issue. While driving at highway speeds, the electric power steering exhibits a distinct 'sticking' or 'catching' sensation when trying to make minor lane corrections. Extra physical effort is required to 'break' the wheel free from the center position, which causes the vehicle to over-correct and jerk into the lane. This creates an immediate risk of losing control or drifting out of the lane. The steering wheel catches and requires excessive manual force to unstick, leading to unsafe over-correction and lane drifting. This is a severe, recurring safety hazard.

The steering wheel in my 2017 Chrysler Pacifica is sticking or catching, especially during turns or when trying to return the steering wheel back to the centered position. Unknown cause. The steering system nearly consistently exhibits a sticking sensation during gradual turns, particularly when the steering wheel is positioned near the 11 o'clock or 1 o'clock position, and very noticeably at highway/freeway speeds. A very dangerous situation. During these events, there is increased steering effort required to return the steering wheel back to center. After or during the correction of the steering wheel back to the center position after these events, there seems to be some type of a sudden reactivation of the power steering assistance. It feels extremely dangerous to continue to operate this vehicle with this current condition.

The contact owns a 2017 Chrysler Pacifica. The contact stated that the vehicle was taken to the dealer to complete a recall repair for NHTSA Campaign Number 24V536000 (Hybrid Propulsion System). The contact was advised that the parts were not available and on back order with no estimated time of arrival. The manufacturer was notified of the issue. The approximate failure mileage was 128,000.

While driving my 2017 Chrysler Pacifica, the vehicle experienced a sudden, severe malfunction of the Electric Power Steering (EPS) system. The dashboard illuminated a "Service Power Steering" warning light, which was accompanied by an immediate, complete loss of power steering assist. The steering wheel became extremely stiff and heavy. It required immense physical force to steer. This failure occurred suddenly without warning, creating an immediate and severe crash hazard by making the vehicle uncontrollable. The vehicle also suddenly restored power assist while I was using the extra force which made driving very dangerous. I use my minivan to drive my kids to school every day and this hazard could have resulted in tragic loss of life especially with an infant and three toddlers in my car. I just noticed that the safety probe PE25009 has been opened last year with no recalls yet. Please help us resolve this ASAP as this is a critical, life-threatening, safety issue.

The vehicle has an unresolved electrical/propulsion failure involving sudden shutdowns while driving and CAN C bus/lost-communication faults. Since the high-voltage battery was replaced through a recall-related repair, the vehicle has had repeated shutdown/loss-of-communication events, occurring dozens of times. In the most serious incidents, while driving at speed, the dash flickered, windshield wipers activated unexpectedly, headlights turned off, turn signals would not work, and steering locked or became difficult to control. The vehicle then completely shut off while still moving. After shutdown, the hazard lights would not work. One documented incident occurred on the interstate at about 70 mph. This puts occupants and others at risk because the vehicle can suddenly lose motive power and critical electrical/control functions at the same time, including lighting, signals, hazards, instrument display, and steering/control assistance. The vehicle has been inspected multiple times by a Chrysler dealership. Dealer records documented multiple modules losing communication on the CAN C bus. The dealer replaced the shifter module as a possible contributor, but the problem continued. The dealer later corrected loose pin tension at a communication/star connector, but the vehicle continued to shut down and later scan reports still showed widespread active/stored CAN and lost-communication faults across powertrain, hybrid control, body control, braking/ABS, steering, and shifter-related systems. The vehicle is available for inspection upon request. The problem has been confirmed by dealer scan reports and repair records, but the root cause remains unresolved. The manufacturer has been contacted through customer care and repair/scan documentation was submitted. The exact root cause is UNKNOWN, but dealer findings indicate an unresolved major electrical/CAN communication problem possibly involving the harness, connector network, or communication system.

2017 Pacifica, 58,000 miles. Engine light comes on, error code is "00305 Engine misfire on cylinder 5". Replaced sensor and ignition coil and spark plugs, but error keeps coming back. The mechanic found that the head gasket is leaking anti-freeze into the cylinder. Looking online this is a common problem with Pacifica 3.6L engines, many people have had the same problem, there is a defect with the engine I checked for a recall, but there is nothing open for my VIN.

My 2017 Chrysler Pacifica steering wheel started locking in place at approximately 10 a 2 o'clock the other day as we were on a couple hundred-mile trip over the Memorial Day weekend. We looked up the symptoms, it said there was a recall for the Power Steering Assist v53/NHTSA 19V-348. I drove the car slowly the entire way home and set up an appointment at CDJR of Morgantown for the next day May25th at 8am. After arriving at the dealership, I was informed that this particular recall was closed, although its description fit exactly what my car had been doing the previous day. I informed them that my main battery IBS had been broken for nearly a year and wondered if that could have been the problem also. They took the car at 8am and at 9 am the man at the desk that had been helping me came to the waiting room and informed me that URSE dodge (where I bought the vehicle in 2017) showed record of performing the recall check " That's a lie" I replied! None the less, at 10 am they reported to me that the auxiliary battery had 0 CCA and needed replaced and that the IBS would also need replaced, all of which would run me nearly 1000 dollars. I asked when they could get the IBS and the parts department said 5 days, I asked the gentleman that had originally been helping me if they checked the ground wire from the original recall and he said yes, and it was fine. I changed the auxiliary battery and the IBS myself at Advance Auto yesterday and after I had the main battery hot lead off it also cleared all the codes that the dealership said was on the vehicle (electrical codes). I drove the vehicle yesterday and I can't say for sure that it did it, although I believe it stuck lightly a couple of times. The IBS and the auxiliary battery are my fault, I should have addressed them sooner. The bigger issue here is that URSE dodge in Fairmont never called me, I never received a recall notice.

I pulled into the Dollar General and before I could get to my parking spot the vehicle made a beep sound and stalled and wouldn't move . There were no warning lights that came on. It wouldn't accelerate and I was nervous for the traffic that would be pulling in behind me. I put the vehicle in park and turned off the vehicle to see if it would start again. After restarting the vehicle I was able to drive to parking spot. This is the first time this has happened and we were trying to check for safety recalls in this vehicle but are nervous of any further occurrences that would cause engine failure for us and the cars around us.