2018 CHRYSLER PACIFICA PLUG-IN HYBRID Complaints

The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 22V077000 (Hybrid Propulsion System) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that she was unable to charge the vehicle. The approximate failure mileage was 46,577. VIN tool confirms parts not available.

While driving the vehicle in rush hour traffic the engine slowed and would not accelerate when the gas pedal was applied. The light for the parking break went on along with the battery light. The vehicle appeared to be breaking on it’s own. A message was displayed though I do not recall what it was. Maybe a message to park? I attempted to switch to an outer lane and coast toward the side of the road until the vehicle stopped. I was partially blocking one of the two lanes in a no parking area. I turned the vehicle off and several times attempted to restart it. It would not initially shift into park. When it finally did I repeatedly attempted to start it. The display worked though the vehicle would not shift into drive, reverse, or neutral. The light for each gear flashed. I attempted for some time and at one point it did go into neutral. I attempted to restart and put it in drive then it would not go into neutral. I contacted the local Chrysler dealer who gave me the number for roadside assistance. I contacted the police to notify them as the vehicle was disabled in the road partially in a driving lane. I contacted Chrysler as this has happened previously. I have repeatedly had it serviced for similar problems with it unexpectedly turning off or not starting.

The contact owns a 2018 Chrysler Pacifica Hybrid. The contact received notification of NHTSA Campaign Number: 22V077000 (Hybrid Propulsion System) however, the part to do the recall repair was unavailable. The local dealer was contacted and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2018 Chrysler Pacifica. The contact stated while reversing up the driveway he noticed a loud noise. There was no warning light illuminated. The contact took the vehicle to the dealer to be diagnosed and was informed that the lower control arms needed to be replaced. The vehicle was not repaired. The contact related the failure to NHTSA Campaign Number: 19V143000 (Suspension). The manufacturer had not been notified of the failure. The approximate failure mileage was 42,570.

I was driving with the gas engine running when I lost power and then the engine shut off. I was able to get the engine restarted but it wouldn’t move forward or backwards under power.

This is in regard to the most recent recall on the 2018 Chrysler Pacific Hybrids. The entire reason that we purchased this vehicle, was so that we did not have to spend money on gas, as well as for the environment. It is unacceptable that we are expected to sit and wait with a major potential fire hazard. We live in a gated community where we cannot park the vehicle away from our home. We have a short driveway and my 67 year old Mother sleeps in the room RIGHT next to the driveway. We are not okay just accepting this as it is and think it is completely wrong that people just have to "hope it doesn't catch on fire." This is also already the second or third recall on the vehicle.

We were on the return portion of a road trip, this was day 4 of driving. There had been no indications of any issues at all on days 1-3. While going 80 mph on i-80 in nebraska, in the left lane, the vehicle suddenly lost drive power (electric systems stayed on). My husband, who was driving, pressed the gas pedal to try and regain power. At that point the check engine light came on, followed by a red turtle image accompanied by the words "vehicle speed may be limited". My husband was able to coast us to the shoulder of the highway before the vehicle stopped moving completely. We had no warning at all that anything was wrong. I had just had the vehicle in for an oil change a few days prior to the trip and they did a basic inspection- all was fine. I am so thankful the road was not crowded and that no 18 wheelers were too close. This could have ended very differently and we were very scared. After waiting by the side of the highway for nearly an hour, we were towed to a nearby dealer. They diagnosed transmission failure.

While driving at 60mph, vehicle shut off and would not allow me to accelerate. Error message displayed on speedometer, vehicle must be in park to shift gears. The PRNDL blue LED was flashing as well. Several indicator lights on my dashboard illuminated too. Vehicle has approximately 9300 miles on it. This is a pacifica e-hybrid. After pulling off the road I was able to restart and the van worked in “limp home” mode with the red turtle displayed. I then limped the van to a gas station, shut off the van, topped off the fuel tank which had been at 1/4 full, and after a few minutes restarted. After restart, only the yellow check engine light was displayed and the van operated normal. I have read a safety recall exists but Chrysler is saying it is not an active recall for my specific VIN even though I am experiencing the same problems as other owners. I am pretty sure it is associated with one of: 19V348000, 18V049000, or 18V524000. The dealer won’t repair this under recall since all my “active recalls” have been fixed. I can’t drive the vehicle safely but how can I get it fixed if Chrysler won’t repair the issue I am having. With no error codes saved, the dealer said unless it replicates while they have it they won’t be able to diagnose.

The car 12v battery drains completely, rendering the vehicle immobile and completely non functional. There has been an electrical burning smell once the car is jump started and driving. I fear there is some kind of short or electrical discharge somewhere that could render the vehicle inoperable or start a fire at my home or while the car is being used. This vehicle has been at the dealer for 7 weeks and they have not found the problem. I have been told that the car has been connected to a computer system that is being "looked into" remotely by Chrysler. They have replaced the battery and the charging management system at my expense. The problems started when the car had 38000 miles and began with the "radio" which controls many other functions of the car constantly rebooting and having corrupted firmware which I was told cannot be fixed, only replaced. I have since been told this unit cannot be ordered at this time.

Picked up Vehicle from Bayside Chrysler Dodge Jeep Ram of Annapolis after we were told the problems were addressed. After driving about 50 miles home parking than driving the Van again about 5 miles, In the center lane of the road driving about 45 mph the van said "Shift to P to start". The van wouldn't accelerate forcing my wife to drift to the shoulder of the road. The van was turned off and attempted to turn back on, but the Van would not turn completely on to drive. After about five minutes the van was able to be restarted and turned on. The check engine light came on, the van was driven to Auto zone to have the check engine light read. "Power Train System - P0BFD" & " Secondary DTC".