DUCATI Complaints

WHEN MOTORCYCLE DRIVEN AT SLOW PACE OR IN TRAFFIC THE HEAT IS UNBEARABLE FROM EXHAUST MAKING ME OVER HEAT AND ALMOST PASSED OUT FROM THIS BIKE CAUSING BURNS ON LEG. *TR

MOTORCYCLE GAS TANK (PLASTIC) IS DEFORMING AND: A) NO LONGER SITS TIGHT TO THE FRAME AS DESIGNED, B) IS EXERTING PRESSURE ON IGNITION, MAKING THE TANK DIFFICULT TO LATCH AND UNLATCH FOR MAINTENANCE. *TR

MY MOTORCYCLE HAS A PLASTIC GAS TANK WHICH HAS BEGUN TO EXPAND. THE OUTSIDE DIMENSIONS OF THE TANK HAVE INCREASED AND IT NOW DOES NOT SIT CORRECTLY IN THE FRAME, THE HANDLEBARS HIT IT ON TURNING, AND IT PRESSES AGAINST THE IGNITION SWITCH. PREVIOUSLY IT OPENED AND CLOSED WITHOUT PROBLEMS, NOW I HAVE TO WEDGE IT AGAINST THE IGNITION SWITCH TO CLOSE IT. THE RUBBER MOUNTS NO LONGER SIT ON THE FRAME. I HAVE NOT SIGNIFICANTLY MODIFIED MY MOTORCYCLE EXCEPT FOR AN AFTERMARKET EXHAUST AND SOME COSMETIC CHANGES. I HAVE MADE NO MODIFICATIONS TO THE FUEL TANK OR FUEL PUMP. I AM CONCERNED AS TO THE SAFETY OF THIS MOTORCYCLE NOW. THE TANK'S SWELLING HAS MADE IT SO THE HANDLEBARS DO NOT TURN CORRECTLY. IF THE TANK SWELLS ENOUGH, IT WILL SPLIT OPEN AND I AM CONCERNED THIS WILL HAPPEN WHILE I AM RIDING. *TR

FUEL TANK LEAK OVER EXHAUST PIPES. LEAK AT FLANGE TO TANK. NEW FLANGE O RING DOES NOT STOP THE LEAK. *TR

MY 2005 DUCATI MONSTER S2R800 HAS A PLASTIC GAS TANK WHICH HAS BEGUN TO EXPAND. THE OUTSIDE DIMENSIONS HAVE INCREASED AND IT DOES NOT SIT CORRECTLY IN THE FRAME AND IT NOW ITS GETTING CLOSE TO THE IGNITION SWITCH. ITS THE ORIGINAL TANK , STARTED TO SHOW FEW BUBBLES HERE AND THERE! MIGHT BE WARPING! I WORRY ABOUT MY SAFETY AND AS WELL OF OTHERS. AND HOPE THIS GETS RESOLVE. *TR

MY MOTORCYCLE HAS A PLASTIC GAS TANK WHICH HAS BEGUN TO EXPAND. THE OUTSIDE DIMENSIONS OF THE TANK HAVE INCREASED AND IT NOW DOES NOT SIT CORRECTLY IN THE FRAME, THE HANDLEBARS HIT IT ON TURNING, AND IT PRESSES AGAINST THE IGNITION SWITCH. PREVIOUSLY IT OPENED AND CLOSED WITHOUT PROBLEMS, NOW I HAVE TO WEDGE IT AGAINST THE IGNITION SWITCH TO CLOSE IT. THE RUBBER MOUNTS NO LONGER SIT ON THE FRAME. I HAVE NOT SIGNIFICANTLY MODIFIED MY MOTORCYCLE EXCEPT FOR AN AFTERMARKET EXHAUST AND SOME COSMETIC CHANGES. I HAVE MADE NO MODIFICATIONS TO THE FUEL TANK OR FUEL PUMP. I TOOK THE BIKE TO THE DEALER WHO SUBMITTED A CLAIM TO DUCATI NORTH AMERICA (THE IMPORTER/FACTORY). I AM VERY CONCERNED AS TO THE SAFETY OF THIS MOTORCYCLE NOW. THE TANK'S SWELLING HAS MADE IT SO THE HANDLEBARS DO NOT TURN CORRECTLY. IF THE TANK SWELLS ENOUGH, IT WILL SPLIT OPEN AND I AM CONCERNED THIS WILL HAPPEN WHILE I AM RIDING. *TR

MY MOTORCYCLE HAS A PLASTIC GAS TANK WHICH HAS BEGUN TO EXPAND. THE OUTSIDE DIMENSIONS OF THE TANK HAVE INCREASED AND IT NOW DOES NOT SIT CORRECTLY IN THE FRAME, THE HANDLEBARS HIT IT ON TURNING, AND IT PRESSES AGAINST THE IGNITION SWITCH. PREVIOUSLY IT OPENED AND CLOSED WITHOUT PROBLEMS, NOW I HAVE TO WEDGE IT AGAINST THE IGNITION SWITCH TO CLOSE IT. THE RUBBER MOUNTS NO LONGER SIT ON THE FRAME. *TR

THE FUEL TANK HAS EXPANDED AND DEFORMED, ALLOWING IT TO DISENGAGE FROM ITS MOUNTS AND SEPARATE FROM THE MOTORCYCLE. IT ALSO DEVELOPED DIMPLES AND BUMPS ON IT'S OUTER SURFACE. *TR

FUEL TANK EXPANDS OVER TIME AND COMES LOOSE FROM THE MOUNTS. FUEL TANK IS COMPLETELY OFF OF IT'S MOUNTS. THIS IS THE THIRD TANK ON THE MOTORCYCLE. ALL 3 TANKS HAVE HAD THE SAME PROBLEM. *TR

STALLED WHILE DRIVING AND WOULD NOT START. DEALER FOUND HIGH PRESSURE FUEL HOSE IN TANK DISCONNECTED, DEALER REPLACED FUEL LINE. *TR