1994 FORD BRONCO Complaints

CRACK AND RUST RAIN GUTTER LEFT AND RIGHT SIDE ABOVE DOORS. THIS IS THE SECOND BRONCO I HAVE OWNED THAT DID THE SAME THING. THE OTHER BRONCO WAS A 1987 (?) OR SO IT WAS FIXED AT LEAST 2 TIMES BY FORD BUT CRACK CAME BACK. THIS BRONCO DID SAME THING FORD SAID THERE IS NO FIX. THERE SHOULD BE ONE OR MONETARY COMPENSATION AS IT IS A KNOWN REOCCURRING PROBLEM. THE RUST IS GETTING BAD NOW AND THEY DON'T WANT TO KNOW ANYTHING. THEY WERE NOTIFIED OF IT WHILE IT WAS UNDER WARRANTY THEY PUT BODY SEALER ON THE CRACKS TO SEAL THEM UNTIL IT PEELED AND FLAKED OFF. *AK

VEHICLE WAS MAKING LOUD HUMMING NOISES. WHILE DRIVING ON THE HIGHWAY AND GOING UP HILL, ALL OF A SUDDEN THE VEHICLE WOULD NOT MOVE. APPLIED BRAKES AND PUT VEHICLE IN PARK AND LEFT IT THERE. CONTACTED THE MECHANIC WHO REPLACED THE TRANSMISSION IN MARCH 1998, BUT WARRANTY WAS UP. *AK

THIS APPEARS TO BE A DESIGN DEFECT. THE CATALYTIC CONVERTER IS MELTING THE RADIUS ARM BUSHINGS. FORD HAS HAD SIMILAR PROBLEMS WITH FORD EXPLORER AND PROBABLY F150. IF YOU TALK TO THE PARTS FOLKS THIS IS A COMMEN PROBLEM. I HAVE WRITTEN AND CALLED FORD SEVERAL TIMES ABOUT THIS. THE RADIUS ARM BUSHINGS HELP HOLD THE FRONT AXLE IN PLACE, WHEN THEY MELT IT CAUSES THE VEHICLE TO STEER AND BRAKE DANGEROUSLY.

TOTAL LOSS OF BRAKING DUE TO MALFUNCTIONING OF MASTER CYLINDER. DEALER NOTIFIED AND MAD E REPAIRS. EPORTING THIS INCIDENT TO NHTSA. *AK

THE CLOCK SPRING IS LOOSE WITHIN AIRBAG ASSEMBLY, CAUSING A RATTLING NOISE WHEN TURNING THE STEERING WHEEL. *AK

THIS IS THE MAIN HARNESS THAT REVEALS HEATING AT THE 120 PLUS PIN CONNECTOR AT THE ENGINE WALL AND CONNECTED TO THE COMPUTER MODULE UNDER THE HOOD ADJACENT TO THE STEERING COLUMN. CONTACT JOHN AT SUPERIOR INVESTIAGTIONS AT THE ABOVE NUMBERS FOR ADDITIONAL INFORMATION

BUSHINGS APPEAR TO HAVE MELTED. THE RIGHT BUSHING IS NEAR THE EXHAUST, SO WHEN IT FAILED I ASSUMED IT WAS THE PROXIMITY TO HEAT. THE LEFT IS NO WHERE NEAR ANY HEAT SOURCE. THE REPLACEMENT ON THE RIGHT SIDE AND ALL OTHER SUSPENSION COMPONEMTS SHOW NO SIGNS OF WEAR. ONLY THE ORIGIONAL BUSHINGS HAVE DETERIORATED. *AK

WAS TOLD OVERHEATED CATALYTIC CONVERTER BURNED THROUGH TRANSMISSION FLUID LINE, CAUSING FIRE. MY HUSBAND AND I WERE DRIVING ON A TRIP (ON 12-28-98) WHEN OUR 1994 FORD BRONCO CAUGHT ON FIRE. AFTER THE FIRE TRUCKS ARRIVED AND THE FLAMES WERE PUT OUT, TH

VEHICLE SEAT TRACKS/ANCHORS FAILED RESULTING IN STABILITY PROBLEMS WITH SEATS, RECALL ON COMPONENT HOWEVER VEHICLE DENIED DUE TO VIN #.

THIS RISK WAS PARKED IN AN ENCLOSED GARAGE FOR APPROX. TWOO HOURS BEFORE CATCHING FIRE DOING DAMAGE TO THIS PLUS ANOTHER VEHICLE PLUS SMOKE AND HEAT DAMAGE THROUGHOUT THE STRUCTURE. THIS LOSS IS AN ELECTRICAL COMPONENT FAILURE OVER THE DRIVERS SIDE FRONT FENDER IN THE AREA OF THE PRIMARY FUSE PANEL. CALL JOHN AT SUPERIOR INVESTIGATIONS FOR DETAILS 727-848-3923.