2011 FORD EDGE Complaints

The contact owns a 2011 Ford Edge. The contact stated that while driving at undetermined speeds, the brake pedal became firm. The brake pedal was depressed but was slow to respond. There was an abnormal hissing sound detected. There were no warning lights illuminated. The vehicle was taken to an independent mechanic who bled the brakes. The vehicle was taken to the local dealer where it was diagnosed that the brake booster needed to be replaced. The vehicle was repaired but before leaving the dealer, the failure recurred. The manufacturer was contacted and provided a case number. The approximate failure mileage was 80,000.

I was driving to work early morning, roads were wet due to light layer of wet snow. Brakes worked normal when stopping at a stop sign and traffic light. When traffic start moving a vehicle in front of me was going to turn left I applied my brakes to slow down, however when the brake pedal went to the floor it felt like I was going to hit the car. I continued to keep pressing on the brake and finally stopped. When arriving at work the brakes reacted the same when attempting to stop. I checked the brake fluid it was filled. Furthermore there was no indication on my dash regarding brake service needed. I contacted my independent mechanic who informed me to have the car towed or drive it very slow with my flashers on. He also felt it was the brake booster because Ford was aware of this problem so they extended warranty coverage for the booster to 10 years of service or 150,000 miles. My mechanic contacted the dealer who said that it was not covered under the warranty since it was be on 10 years. However I have only 97,580 miles but over the 10year warranty. Besides replacing the brake booster the hydraulic control unit had to be replaced. Bottom line is the cost amounted to $1,750.68. I can't understand why Ford Motor Company has not issued a recall or the National Highway Traffic Safety Administration (NHTSA) has not required a recall on these effective brake components. This definitely is a safely related defect when one looks at the number of complaints filed with NHTSA. As we know the steering and brake are major safety components of any vehicle. From my research and review of the complaints it appears that both Ford Motor Company and the NHTSA have other agendas that are more important then a faulty brake component. It just a matter of time before a major accident happens where someone is critically injured. I sure hope and pray it is not a child.

The interior dome light stays on and door-ajar light for the driver/passenger doors. I have opened and shut the doors gently several times and the light will stay on for at least 50 mins. Sometimes, the light pops on when the car has been sitting in park.

It was the first snowfall of the season. Roads were slippery so my speed was reduced and I was being cautious. As I was approaching a stop sign my anti-lock brakes kicked in. Ever since then my brake pedal has been very soft. At times it felt like I have had to push my brake pedal all the way to the floor in order to stop. Roads are still slippery and when approaching other stop signs (in our development with no other traffic around) I tried to get my anti-locks to work and now they don't kick in and the brake pedal is very soft. There are no indicators on the dash and when doing a "system check" through the computer, it says the brakes are ok.

Without warning or partial failure the brake pedal goes near to the floor before limited breaking function. The vehicle is not capable of emergency braking. Local mechanic advised that the brake booster had to be replaced. It was replaced. I was never told that the HCU module could be the issue. Consequently, the issue still occurs: very soft pedal and very little brakes. After researching, the same identical problem was posted online by numerous Ford Edge owners of my year and other years. Ford Motor Company (Ford) Recall No. 19S54 – Certain 2006-2010 Model Year Ford Fusion, Mercury Milan, Lincoln Zephyr and Lincoln MKZ Vehicles Equipped with Anti-Lock Brake Systems – Anti-Lock Brake System Hydraulic Control Unit Valve Function. It did not include the Ford Edge. There have been several NHTSA follow up and Ford continued to work with NHTSA to investigate and engaged in ongoing discussion with NHTSA. This issue has gone long enough. Local mechanics are not familiar with the recommended procedure to fix the problem and that it would be prudent to have a properly trained Ford mechanic fix the issue. A recall is necessary so that Ford Edge owners can be notified of a potential danger.

Brake is extremely soft and must be pushed all the way to the floor to function. Both master cylinder and HCU were replaced with no correction to the problem. It is being inspected again.

The contact’s daughter owns a 2011 Ford Edge. The contact stated that while the brake pedal was depressed, her daughter heard a hissing sound, and the brake pedal became difficult to depress without extra effort. The contact also stated that on multiple occasions while the brake pedal was depressed, the brake pedal intermittently went to the floor. No warning lights were illuminated. The vehicle was taken to an independent mechanic to be diagnosed. The contact was informed that the brake booster needed to be replaced. The dealer was notified of the failure and the contact was informed that the vehicle was not covered under warranty. The vehicle was not repaired. The manufacturer was notified of the failure and the contact was informed that there was no recall on the VIN. The manufacturer also confirmed that the vehicle was not under warranty. There was no further assistance provided. The failure mileage was approximately 63,000.

Cel light and P0456 diagnostic reading indicates an EVAP leak. Large fuel leak discovered emanating from the fuel tank area when tank is at full. Fuel tank was removed and upon inspection it revealed the fuel tank had cracked at the top of the rollover valve just underneath a vent line. There is no recall for this fuel tank as there should be. A new fuel tank is ordered and awaiting delivery as there is no replacement part or means to install a new rollover valve. Cost of tank at discount is $1000. Photo of cracked area is attached.

The contact owns a 2011 Ford Edge. The contact stated that while operating the vehicle, the message "Service Brakes" was displayed. While depressing the brake pedal to stop the vehicle the pedal went to the floor and the braking distance was extended. The vehicle was taken to the local mechanic who replaced the rear brake pads. After retrieving the vehicle, while driving at an undisclosed speed, the vehicle was jerking while depressing the brake pedal. The cause of the failure was not yet determined. The local dealer was contacted and notified of the failure, but no assistance was offered. The manufacturer was not yet notified of the failure. The failure mileage was 70,000.

The contact owns a 2011 Ford Edge. The contact stated while driving approximately 45 MPH, she had to depress the brake pedal very hard to avoid crashing into a vehicle which had cut in front of her. The contact stated that the brakes failed. The contact stated that the brake pedal depressed to the floorboard, failing to stop the vehicle as needed. The contact steered the vehicle into the right lane to avoid a crash. The contact had not noticed any warning lights being illuminated. The contact pulled off the roadway and was finally able to stop the vehicle. The contact stated that the brakes had failed to stop the vehicle in a timely manner. The contact drove the vehicle to her residence. The contact stated that she had previously driven the vehicle to a dealer due to a prior brake failure. The dealer diagnosed the vehicle and determined that the brake booster needed to be replaced; however, the vehicle was not repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 160,000.