2020 FORD EXPLORER Complaints

recall in 2022 on rear bolts breaking was done bolts was replace. how ever new bolts are breakng as well, and dealership has put out report but only if rear bolts brake at this time u wreck the car , note two cars has crash do this when i ask they said the not replace them unless they break this incluedes bolts in upper and lower control arms, and related compontents, now why would say replace the bolts but wait untill they break makes no sence to me as total loss control can happen bolts should be replace with stanless steel , mettle wont rust or seze up , my resuch pulled up 5 car crashs all was hurt no one died so what must happen dose people neeed die , ? this must be taken care of asap cars are not safe , and this leads me to bigger probem front end uses same bolts yeat we have no idea how many bolts was replaced and never documented,

it is well know fack that rear bolts for axle and all part tend break ford replace them once with what ? bolts that still break so probems was never fix, now as ford did this as was no recall they refuseing replace bolts a 2ed time to fix there error, wich lead to many cars being damage so bad ford has refuse to fix them leaveing the people holding the bag more so when car wreckes, probem is ford and may others are hiding cars throw use of modle number vr ack year that car was made under, 2020 ford expoler made 2019 throw not one 2019 recall was place on this car, ? and why vin is base on modle number not year was made, and your department dose not force these busness to investgate part number in reclall list, parts should not been used in newer cars but was this goneing on more then not, now again i get message replace rear axle bolts only after they brake ONLY AFTER THEY BREAK now they know what will happen if they brake going 70 mpr, this probem was never fix right first time and now again this time ford saying we not going replace bolts , it is time you all step up and find out why this keeps going on why wasent it fix and get fix right, this is huge saft probem, that one can lose a hole tire if more one bolts breaks this has happen, ford and others do not look at part numbers as part there recall process throw part number in the system so if other cars has this probem people has fix it, think change must be made to not only look at vin but part numbers in all recalls regardless of vin or what car if that part is in it should be replace, now i cant explane why ford refuse to not replace such a critcal part this is not just something as lose pice of molding these bolts hold rear end in place and all the bolts prone to breaking, i ask that u look in to why they replace first time and why they must be replace again and force ford to replace these bolts befor some one dies

The contact owns a 2020 Ford Explorer. The contact stated while accelerating from a stop, there was a screeching noise coming from the transmission and the vehicle experienced hard shifting. The vehicle was taken to the local dealer who diagnosed the vehicle and determined that there was transmission fluid leaking from the transmission oil cooler. The contact was advised that the transmission oil cooler was faulty and needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure, but no assistance was offered. The failure mileage was 47,000.

Lift gate stopped opening. Would no longer operate with any of the buttons in the car or key fob. Dealership states that they are seeing this happening a lot with this vehicle at around 60,000 miles. This is a safety issue. What if you needed to get out of your trunk due to an emergency. The lift gate latch quit working due to having 60,000 miles on your car. That makes absolutely no sense. I feel that this needs to be recalled. This is a necessary door that should no go out due to a certain mileage.

The contact owns a 2020 Ford Explorer. The contact stated that while driving at various speeds, the vehicle lunged forward and jerked upon releasing the accelerator pedal. The contact stated that on one occasion, the SRS warning light was illuminated. The dealer was notified of the failure, but no service technicians were available to inspect the vehicle. The vehicle was then taken to an independent mechanic, where it was determined that the failure was related to NHTSA Campaign Number: 23V069000(Power Train), and the contact was referred to the manufacturer for assistance. The manufacturer was notified of the failure and informed the contact that the VIN was not included in the recall. The vehicle was not repaired. The failure mileage was approximately 96,500.

The transmission failed on my 2020 Ford Explorer with only 66,000. Ford knows there is an issue with the snap ring inside of the tranmission but won't do anything about it. This is a vehicle that is less than 5 years old and 6,000 out of warranty. There was no warning to the transmission going out, I was on my way to work and my car downshifted very hard and lost all power. I was on the 4 lane highway and thankfully was able to get over to the side of the road safely and call my husband. There were no warning lights or messages displayed but clearly the transmission was bad. I took my vehicle to my local Ford dealer and they confirmed the snap ring had come unseated and I was going to need a new transmission. I took it to a local transmission shop to get a second opinion and they also confirmed the same thing. I called Ford Customer Care and they weren't able to help. She stated there is a TSB out for this issue but no recall at the moment so they wouldn't cover anything under warranty. I paid $5,400 out of pocket to fix a repair that Ford knows is going on and that could have been a major safety issue, had I not been able to get off the highway.

The contact owns a 2020 Ford Explorer. The contact received notification of NHTSA Campaign Number: 23V675000 (Power Train); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

The contact owns a 2020 Ford Explorer. The contact stated while driving at approximately 55 MPH and slowing to exit the highway, the vehicle downshifted hard, and the vehicle was jerking. The contact stated no warning light was illuminated. The contact stated that the failure was recurring and was occurring while slowing down or while accelerating. The contact had taken the vehicle to a dealer who diagnosed the vehicle and determined that there was coolant intrusion into the transmission and the transmission needed to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was approximately 100,000.

The contact owns a 2020 Ford Explorer. The contact stated while driving at an undisclosed speed, the steering assist and several other unknown warning lights illuminated. The contact stated that the vehicle was difficult to steer. The failure occurred while the contact was driving home from a trip. The contact made several attempts to have the vehicle inspected for the failure; however, there were no local dealers available. The vehicle was taken to an independent mechanic; however, the vehicle was not diagnosed. The contact was informed that there was a failure with the steering. The contact was advised to safely drive the vehicle to his destination and then take the vehicle to a dealer. The vehicle was driven to the residence. The vehicle was taken to the dealer where it was diagnosed with a power steering control module failure. The contact was informed that the power steering control module needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure and a case was filed. The manufacturer agreed to cover 50% of the repair cost. The failure mileage was approximately 67,900.

The contact owns a 2020 Ford Explorer. The contact stated while driving at various speeds and attempting to accelerate, the vehicle was jerking abnormally. There was no warning light illuminated. The vehicle was taken to the dealer where it was diagnosed and determined that the main control valve had failed and needed to be repaired. The vehicle was repaired but the failure persisted. The vehicle was returned to the same dealer where it was diagnosed that the CDF clutch bushing had seized. The vehicle was not repaired. The manufacturer was made aware of the failure and opened a case. The manufacturer had referred the contact to the NHTSA Hotline to file a safety complaint. The failure mileage was 25,000.