2020 FORD EXPLORER Complaints
View complaints related to 2020 FORD EXPLORER. The complaints found here are submitted by actual consumers with first hand experience. There are more than 1,160 complaints submitted for the 2020 FORD EXPLORER. You can submit your own complaint to the NHTSA or call the Hotline, Monday-Friday 8am to 8pm at (888) 327-4236, TTY: (800) 424-9153.
-
2020 FORD EXPLORER- San Juan Capistrano, CA
The contact owns a 2020 Ford Explorer. The contact stated that while the vehicle was parked, unattended on an incline, the vehicle rolled backward without warning. The contact was able to place her hand on the brake and stop the vehicle. There were no warning indicator lights illuminated. The contact scraped her knee but no medical attention was provided. The contact stated while sitting in the driver's seat, the vehicle rolled backward. The driver was able to depress the brake pedal. The vehicle was taken to the local dealer where they could not duplicate the failure. The vehicle was not diagnosed or repaired. The manufacturer was notified but no additional assistance was provided. The failure mileage was 22,000.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2020 FORD EXPLORER- Elgin, SC
The contact owns a 2020 Ford Explorer. The contact stated that while driving at various speeds, the rear end of the vehicle would make an abnormal, roaring sound as well as vibrate without warning. The contact also stated that the vehicle would violently jerk upon depression of the brake pedal or the accelerator pedal. The contact stated that she had taken the vehicle to the dealer several times for repair and had the transmission replaced; however, a year later, the failure recurred. The manufacturer was notified of the failure and a case was filed. The contact stated that the VIN was included in NHTSA Campaign Number: 21V154000 (Suspension). The vehicle was not repaired. The failure mileage was approximately 6,000.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2020 FORD EXPLORER- Manteca, CA
I have brought my vehicle to the dealership for repair of the Safety Recall for my car. They stated that they repaired the car. However the problem still exist. I have taken images and videos of the problem.
Source: NHTSA WEB SITE -
2020 FORD EXPLORER- Hanover, PA
Reverse camera blue screen is appearing again after the 1st recall “fix”. Apparently this is becoming quite common, as I am in many Ford Explorer groups. Many others have this happening after their “recall fix” as well. Some even appear to have this happening after multiple times of recall “fixes”. Ford should be held accountable for not addressing a safety concern with a concrete solution. I have asked others within the groups to also submit incident reports.
Source: NHTSA WEB SITE -
2020 FORD EXPLORER- White Bear Lake, MN
This vehicle has a recall 21E11, for an inlet exhaust leak on the driver side, but the service technician when doing the recall says I have the exact same thing on the passenger side - a weld has corroded and there is an exhaust leak (photo available). The passenger side is not covered by the 21E11 recall, but is the same identical weld/corrosion/exhaust leak issue. They quoted $3,500 to repair. I have escalated via Ford - case number CAS36437910, but until this side has an official recall, they won't repair.
Source: NHTSA WEB SITE -
-
2020 FORD EXPLORER- Lowell, MA
The back up camera is malfunctioning on my vehicle. It presents a blue image with the back up camera and a blue image on the 360 camera. Everything that I have read shows it is a recall, but my VIN does not have a recall.
Source: NHTSA WEB SITE -
2020 FORD EXPLORER- Salem, MO
Recall 21V735000 was performed by Sakelaris Ford of Rolla, Missouri on December 9, 2021. On February 28, 2022 the problem of the "Blue Screen" Backup Camera display again occurred and has been occurring regularly ever since. I have not yet contacted the dealer to reschedule a follow up pending correspondence from the NHTSA.
Source: NHTSA WEB SITE -
2020 FORD EXPLORER- Amissville, VA
Twice now my car has felt like it has stalled. Once I was at a stop light, the light was red so I stopped. Then when the light turned green I accelerated, the car moved slightly and then stalled. Pedal to the floor and nothing happened. Nothing in the car indicated why this happened. The car was on and ready to go but the petal or engine didn't work. Not sure what happened. The second time it happened I was trying to make a turn from a stop. I accelerated, the car moved a bit then stopped. I was pulling onto a 55 mph road and I was just sitting there. Car was fine, running and seemed to be in working condition but it stalled on me. Pedal to the floor, no response from the car. I have an appointment on Tuesday April 12th to take the car in to speak with the service department. I have spoken to other 6th generation ford explorer owners that have stated the same thing has happened and the service department had no answer for them. I am hoping if enough of us submit an issue it will get investigated preventing a fetal crash.
Source: NHTSA WEB SITE -
2020 FORD EXPLORER- Bailey, CO
The contact owns a 2020 Ford Explorer. The contact stated that there was oil leaking from the vehicle at start-up. The seat heating and cooling system was inoperable. There were no warning lights illuminated. The vehicle was taken four times to the local dealer who was unable to duplicate the failure. The vehicle was then taken to Phil Long Ford of Denver (7887 W Tufts Ave, Denver, CO 80123) where it was diagnosed and determined that the valve was loose and oil was leaking on to the manifold. The vehicle was repaired. The manufacturer was contacted but no further assistance was provided. The failure mileage was approximately 10,516. THE CONSUMER STATED THEY FAILURE WAS DUE TO ELECTRICAL COMPONENTS AND DRIVER'S SIDE BEZEL TRIM REPLACEMENT.
Source: HOTLINE VEHICLE OWNERS QUESTIONNAIRE -
2020 FORD EXPLORER- Plumas Lake, CA
My car warnings were malfunctioning as they were all flashing on briefly. The car has done this before and has other issues with the panel such as now it has the icon for camera visibility is not working. I cleaned each camera and the light is still on. I backed out of the driveway put the car in drive and started to accelerate. I stepped on the brakes and they were not working, I repeatedly tried to stop but they were gone. My car finally stopped (I was not far enough to have started to build any speed. I turned the car off and back on and the brakes were back on. This happened March 31st, 2022.
Source: NHTSA WEB SITE