2007 FORD F-150 Complaints

THE COIL SPRING ON THE DRIVER'S SIDE STRUT BROKE WHICH APPEARS TO BE A WELL DOCUMENTED RELIABILITY PROBLEM ON THE F150 TRUCKS. THE MECHANIC SAID THAT THIS FAILURE ALWAYS HAPPENS ON THE DRIVERS SIDE AND THE SPRING BREAKAGE IS ALWAYS IN THE SAME SPOT. THE ID TAG ON THE PART WAS U 4L34 5310- BUT THE REST WAS NOT LEGIBLE.

THE THREADS IN MY 07 FORD F 150 FOR MY SPARK PLUG IN ONE OF MY CYLINDER'S WENT BAD. AND MY PLUG LEAKED HIGH PRESSURE COMPRESSED HEATED EXHAUST. CAUSING MY IGNITION COIL TO PARTIALLY MELT. ITS RIGHT BELOW THE FUEL RAIL SENSOR TOO. ITS THE BIGGEST PAIN IN THE BUTT TO FIX. USED A HELICOIL. DIDN'T LAST TOO LONG. TRYING A MORE PERMANENT FIX NEXT. I WAS ON THE HIGHWAY GOING 70 WHEN THE PLUG BEGAN A VERY NOTICEABLY LOUD RHYTHMIC LEAK WITH THE IGNITION OF THAT CYLINDER. ALSO, WHEN I SAW THE PROBLEM WHEN I LOOKED AT THE SPARK PLUG. IT HAD ALREADY HAD AN EXISTING HELICOIL PUT IN. AND YOU COULD TELL THIS HAPPEND WAY BEFORE 200K MILES. BECAUSE THE OLD SPARK PLUG WAS WORN ALMOST ALL THE WAY DOWN. I STILL HAVE THE OLD SPARK PLUG.

SHIFTER WON'T COME OUT OF PARKING. I HAVE RESEARCHED AND MANY PEOPLE HAVE REPORTED THE SAME ISSUE WITH FORD F150. SERVICE MANAGER SAID SHIFTER SENSOR WAS NOT WORKING.

IN APRIL 2015 I BEGAN EXPERIENCING ENGINE KNOCKING ON MY 2007 FORD F-150 WHICH HAD 57,532 MILES ON IT. I TOOK IT TO FORD SERVICE DEPARTMENT AND ENDED UP SPENDING $3,080.79 TO REPLACE CAMSHAFT, SOLENOID, AND TIMING CHAINS. I WAS TOLD THIS WORK WAS GUARANTEED. NOW, LESS THAN 7 MONTHS LATER AT 61,452 MILES I BEGAN HEARING SQUEAKING AS I DRIVE. TOOK IT BACK TO FORD AND THEY TELL ME IT IS NOW THE HARMONIC BALANCER IS OUT AND EXCESSIVE CRANK SHAFT END PLAY. I AM TOLD THAT THE ISSUE IS NOT RELATED TO THE PRIOR REPAIR WORK SO I WILL HAVE TO SPEND ANOTHER $3,000 OR MORE TO FIX THIS ISSUE. THIS IS ALL AFTER I SPENT OVER $300 IN DECEMBER 2014 TO REPLACE THE INGNITION COILS. I DRIVE MOSTLY CITY DRIVING. WE PICKED UP VEHICLE WITHOUT REPAIRING IT THIS TIME SO WE COULD FIGURE OUT WHAT TO DO.

VEHICLE HAS STARTED TO JERK AROUND 40-50 MPH. REVIEWS STATES THE SPARK PLUGS AND COILS ARE THE ISSUES. WANTED TO CHANGE OUT SPARK PLUGS, BUT UNDERSTAND THE PLUGS BREAKS UPON REMOVAL AND VERY EXPENSIVE TO FIX. KNOW ISSUE BY FORD MOTOR COMPANY. NOW I DON'T EVEN WANT TO ATTEMPT CHANGING OUT THE PLUGS. THIS ISSUE SHOULD BE RECALL OR PAID BY FORD FOR REPLACEMENT, SINCE THIS ISSUE IS KNOW BY FORD. ISSUE IS STILL ONGOING, HELP, DON'T WANT TO PAY $1000 FOR A SIMPLY MAINTENANCE.

I HAVE HAD SEVERAL ELECTRICAL FAILURES ON THIS VEHICLE AFTER BUYING IT NEW IN OCTOBER 2007, IN OCTOBER 2009 THE CIGARETTE LIGHTER STOPPED WORKING WAS REPAIRED AND AGAIN MONTHS LATER STOPPED WORKING. THE WINDOWS STOPPED WORKING A TOTAL OF SIX TIMES WITH THREE OF THOSE BEING THIS YEAR. I HAVE TAKEN MY CAR IN TO BE REPAIRED A TOTAL OF THREE TIMES THIS YEAR ALONE AND THE LAST TIME , ABOUT FOUR OR FIVE WEEKS AGO I INSTRUCTED THE WORKER TO JUST LET THE WINDOWS UP AND DISCONNECT THEM AFTER BEING TOLD THAT I NEEDED A COMPLETE NEW WIRING HARNESS WHICH WERE NO LONGER AVAILABLE. I WAS TOLD THAT THE WIRING WAS BRITTLE AND THAT THIS WAS A COMMON PROBLEM WITH THE F 150. I FEEL THAT THIS COULD POSE A DANGER IN AN EMERGENCY ESCAPE SITUATION AS WELL AS OTHER PROBLEMS. THIS PROBLEM ALSO INVOLVE THE ELECTRONIC LOCKING SYSTEM WHICH IS A GREAT SAFETY HAZARD, I CAN GET NO REAL RESPONSE FROM FORD.

I'VE HAD THE SPARK PLUG BLOW OUT IN CYLINDER 6 TWICE WHILE DRIVING AT ABOUT 55MPH. MY HUSBAND HAD HIS IN 2008 F150 ALSO. I'VE HAD TO HAVE THE PLUGS REPLACED 2X. JUST WAITING FOR THE FUEL MODULE AND STEERING TO GO AS NOTED IN OTHER NUMEROUS COMPLAINTS.

TL* THE CONTACT OWNS A 2007 FORD F-150. WHILE DRIVING 55 MPH, THE VEHICLE STALLED. THE VEHICLE WAS TAKEN TO A DEALER WHERE IT WAS DIAGNOSED THAT THE CAM PHASERS FAILED. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS 132,000.

THE FAILURES STEM FROM BAD OIL FLOW TO THE TOP END OF THE ENGINE DUE TO A FLAW IN DESIGN. SPECIFICALLY MY CAMSHAFT, CAM PHASER, TIMING COMPONENTS AND LIFTERS ROLLERS HAVE FAILED. THE PROBLEM FIRST SHOWED UP AT 42256 MILES AND HAS SINCE RESURFACED TWICE EVEN AFTER EXPENSIVE REPAIRS. THE WORRISOME PART IS THAT THE WEB IS FILLED WITH THOUSANDS UPON THOUSANDS OF SIMILAR COMPLAINTS ABOUT THIS ENGINE WHICH IS ALSO IN EXPEDITIONS AND CROWN VICTORIAS AND PROBABLY OTHER FORD VEHICLES.

BOUGHT THE T07 F150 AT 28K AND AT 61K THIS HAPPENED. WHILE DRIVING AT LOW GEAR 2ND THE ENGING CHUGGED A LITTLE ( LKE AN OLD DIESAL) TOOK IT TO THE DEALER THEY SAID IT WAS PROBABLY THE SMALL OIL SEAL BEHIND THE CAM. THEY WAS GOING TO CHARGE BE 5600 FOR A NEW ENGINE. THEY TRIED LIKE HE11 TO GET ME TO SAY I DIDNT HAVE THE OIL CHANGED REGULARLY. I NEVER BACKED DOWN, THEN REMINDED THEM THAT I HAD BOUGHT THE $2700.00 EXTENDED WARRENTY (WHICH I USUALLY NEVER DID) THEY BAUKED AND CRIED. BUY SAID THAT THEY WOULD FIND ANOTHER USED ENGINE, THEY CALLED ME AND SAID THAT THEY FOUND ONE FOR 3500 (OR SOMETHING LIKE THAT) I BEGAN A LONG SEARCH ONLINE AND FOUND A REBUILD FOR LESS AND GAVE THEM THE INFORMATION. THEY DECIDED TO GO WITH THAT. THEY ORDERED THE ENGINE AND INSTALLED IT ( WELL WHAT DO YOU KNOW THE REPLACEMENT HAD THE SAME PROB) THEY HAD TO PULL THAT ENGINE AND GET ANOTHER FROM THE COMPANY . TOOK AN EXTRA WEEK AND GOT THE TRUCK BACK ITS NOW AT 100K AND STILL RUNS WELL (SO I KNOW IT WASNT MY DRIVING) SO IT HAD TO BE THE INCORRECT PLACEMENT OF THAT SEAL FROM THE DEALER, WHICH WOULD LEAKED HOT OIL ONTO THE ENGINE AND CAUSE A FIRE. I LOOKED AT THE ORIGIONAL PAPER WORK THAT THEY HAD TO REPLACE TH ORIGIONAL WIRING HARNESS BEFORE IT EVEN LEFT THE FACTORY.