2013 FORD F-150 Complaints

The contact's husband owns a 2013 Ford F-150. The contact stated that while her husband was driving at highway speeds, the vehicle unexpectedly downshifted and the instrument panel went blank. The contact's husband restarted the vehicle and resumed normal operation; however, the failure returned the next day. The vehicle was taken to a local dealer where it was acknowledged that the vehicle had experienced transmission failure; however, the vehicle was not covered under warranty or recall. The manufacturer was then notified of the failure and a case was filed. The contact was then referred to the NHTSA Hotline to report the failure. The vehicle was not repaired and remained with the dealer. The failure mileage was approximately 114,000.

2013 Ford F150 speed control issues. When driving the vehicle will downshift hard. Thankfully I was not driving at higher speeds. The vehicle is available for inspection. The problem has been confirmed by a Ford dealership. I was told by the service manager that the truck was having the symptoms of the recall 19S07, but that the “recall has expired.” There were no warning lights prior to the problem. A wrench symbol appeared on my dash screen when the truck downshifted. I spoke with Ford customer support and they said there was no recall.

The contact owns a 2013 Ford F-150. The contact stated that while operating the vehicle, the back over prevention camera screen displayed a blue screen, and there was no visible image displayed. The contact stated that the failure had created a visibility hazard. The contact stated that occasionally, after shifting to the reverse, the back-over prevention camera failed to activate. The cause of the failure was not yet been determined. The manufacturer and local dealer were notified of the failure, but no assistance was offered. The failure mileage was 118,000.

Truck is down shifting to 1st gear while on freeway at high speed. Causing no control and back wheels to lock up. Almost died. Ford says it’s not covered under recal

The faulty output shaft speed sensor (OSS) causes a signal loss between the sensor and the powertrain control module (PCM), leading to a sudden downshift into first gear, regardless of the vehicle's speed. This sudden downshift can cause the rear tires to slide, potentially leading to a loss of control and an increased risk of a crasH. There is already a recall for the 2014 Models and my 2013 is having the exact same issue.

My vehicle's transmission is suddenly downshifting and should be included in the recall

2013 F-150 subject to Customer Satisfaction Program 19N01, Transmission Molded Leadframe Extended Coverage. Speedometer went to zero, airbag light illuminated, truck downshifted on its own with a sudden lunging feeling, as if I got rear ended. Wrench icon illuminated. Truck would not shift properly. Mileage indication went blank. I was doing 55 mph on the highway with other vehicles around me. Caused me to have to make an abrupt stop and almost caused an accident. Definitely put my safety and others at risk. Problem happened 3 times during my 1 trip. Was able to correct by turning vehicle off then back on. Can be reproduced easily. Not confirmed by dealer or maintenance tech, or inspected by anyone because I am afraid to drive it. There were no warning signs or symptoms before problem occured.

The contact owns a 2013 Ford F-150. The contact stated that while driving at an undisclosed speed, the transmission unexpectedly downshifted. The vehicle returned to normal functionality, but the failure became a regular occurrence. The service transmission warning light was illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the output shaft. The vehicle was not repaired. After investigating the failure, the contact related the failure to the repair under NHTSA Campaign Number: 19V075000 (Power Train); the VIN was included, but the vehicle was already repaired. The contact stated that the failure had not occurred prior to the repair by the dealer. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was 304,000.

Safety issue. Engine code P0720 which means the output speed sensor sends erratic signals to the power train module or PCM. There is a recall on this truck for this exact thing. What happens is the gears in the transmission don’t shift smoothly and what happened to me was I was driving 70mph all of sudden the truck made a loud bang and I was in 6th gear and the truck went from being in 6th gear just dropped into 1st gear and at 70mph it’s pretty frightening. The brakes locked up and i managed to stay calm and regain control of the vehicle and pull over. Immediately I seen a big yellow wrench on the dashboard along with the check engine light so I turned it off and restarted it thinking maybe the computer will reset. The truck is literally stuck in like 3rd or 4th gear because I can’t go past 40 mph. I was only 5 mins away from home as soon as I got home I use my code machine and the engine code I received was P0720. I contacted my Larsen Ford in Lakewood NJ they informed me about the recall but told me that they’re not paying for any repairs because it’s past 10 years. It ended in January of 2024. I didn’t buy the truck until July 2024 I had no idea about any recalls. I’m not the original owner. I just assumed since it’s a safety issue that the manufacturer must be responsible for all repairs regardless of how long it’s been. I bought the truck with only 38,000 miles on it presently it has 40,000 miles on it now but I don’t think it’s fair that I have to pay for everything to be fixed myself.

The contact owns a 2013 Ford F-150. The contact stated while driving 30 MPH, the “WRENCH” symbol became displayed, and the vehicle came to a sudden stop. The accelerator pedal was depressed; however, the vehicle was slow to respond. The vehicle was restarted and then worked as designed. After exiting the ramp and driving on the highway at 70 MPH, the vehicle suddenly stopped. The “WRENCH” symbol was illuminated. The vehicle was taken to the local dealer, who was unable to determine the cause of the failure. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 227,601.