2013 FORD F-150 Complaints

The contact owns a 2013 Ford F-150. The contact received notification of NHTSA Campaign Number: 19V075000 (Power Train); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at various speeds, the transmission unexpectedly downshifted to 1st gear, the vehicle shuddered, skidded, and the rear wheels locked up. The contact was able to coast over to the side of the road. The power train warning light was illuminated with the wrench symbol and the air bag warning light briefly before the vehicle went into LIMP Mode. The contact detached the battery and waited for a while before reattaching the battery, restarting the vehicle, and continued driving. The contact stated that the failure occurred approximately every 5 miles. The dealer was contacted and decided to charge the contact to diagnose the vehicle to determine the cause of failure, instead of completing the recall repair free of charge. The manufacturer was made aware of the issue and referred the contact back to the dealer. The failure mileage was approximately 145,000. Parts distribution disconnect.

Three times in the past couple of weeks, my vehicle has lost power at high speed. Once when I was trying to merge and again while just driving at high speed and giving it gas to avoid a situation in front of me. The first time it happened, the gauges in the fuel economy mode screen stopped working, including the speedometer, giving the vehicle Gas did nothing but rev the engine up like it was in neutral. I coasted to a parking lot on my trucks own forward momentum, shut the vehicle off restarted the vehicle. The gauges were working again, and the transmission seemed to be working as well. The second time it happened to me was while I was driving and it did the exact same thing, but I did not have to pull over to restart the vehicle. It started working again suddenly, at that time, the gauges were working. My husband was on the highway trying to pass another vehicle when he gave it gas, the truck suddenly lost all power, the transmission sounded like it was in neutral revving up due to giving it gas. Then just as suddenly it slammed really hard back into gear with a loud boom, so hard in fact, he thought he was hit from behind and was jerked forward in the vehicle violently. I contacted the dealership who works on our car and was told without a check engine light or a code there’s nothing they can do but to bring it there when it does that. The problem occurs intermittently and corrects before we can get to the dealership. I told the Ford dealership about the recall on the six speed transmission, 19S07, and was told that recall was taken care of in 2019 at Auffenburg Ford where we bought the vehicle. What is going on now is exactly the description of that recall, but because there are no active recalls for my vehicle the dealership does not want to even look at the vehicle. I and my husband or another driver could have been killed with high speed power loss like this. How do I get this recall re-added so the dealership will do something before a fatality?

The lead frame on my truck has began to fail. Throwing the code p-0722. Yes it would be available for inspection upon request. The lead frame failing causes the truck to shift erratically. This was almost life ending when it shifted gears on the I-44 going 70 MPH. Nearly ending my life and that of my passenger. The problem has been reproduced by an independent service center. No it hasn't been inspected by police, insurance, manufacturer. No there were no warning lights before hand.

The contact owns a 2013 Ford F-150. The contact stated while driving at various speeds, the transmission failed to shift above fifth gear. In addition, the contact stated that upon depression of the brake pedal, the vehicle only downshifted to third gear while decelerating. The contact stated that a wrench symbol was displayed, indicating a failure with the transmission. The contact was forced to restart the vehicle to resume normal operation. The contact called the dealer and was informed that the vehicle was not included in NHTSA Campaign Number: 19V075000 (Power Train). The contact used a code reader that showed a failure with the output speed sensor circuit inside the transmission control unit. The manufacturer was not notified of the failure. The vehicle was not repaired. The vehicle was not repaired. The failure mileage was approximately 156,000.

The contact owns a 2013 Ford F-150. The contact stated while driving 55 MPH, the brake pedal was depressed, and the vehicle failed to respond. There were no warning lights illuminated. The vehicle was connected to a trailer and while the brake pedal was depressed, the brake pedal went to the floorboard and the brakes responded intermittently. The contact attempted to disconnect the vehicle from the trailer and the brakes failed to respond. The contact stated that the vehicle hit a curve and came to a stop. The vehicle was taken to an independent mechanic and the vehicle was diagnosed with vacuum pump failure. The local dealer was contacted; however, the vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 166,000.

I have had a problem with the transmission molded lead frame 19N01 it also shows a wrench when this problem occurs. This caused my vehicle to not show the speed limit of my vehicle. It also caused my vehicle not be able to accelerate. I then worried about this problem due to this incident was on the highway and almost caused a crash.

The contact owns a 2013 Ford F-150. The contact stated while driving at approximately 45 MPH, there was an abnormal sound coming from the front brakes. The contact stated that the braking system independently engaged and stopped the vehicle. The contact stated that the vehicle had not stalled. No warning lights were illuminated. The vehicle was taken to a parts store and upon parking he observed that smoke was being emitted from the passenger side front wheel well. The contact stated that he observed that a flame was visible from the passenger wheel well and that store employees had extinguished the flames with hand-held fire extinguishers. The vehicle was towed to an independent mechanic where it was diagnosed that the front brake line on the passenger side, both brake drums, calipers, pads, and rotors needed to be replaced. The vehicle was repaired. The contact stated that later the failure recurred and he needed to replace pads, and calipers on the front passenger side. The contact researched online and related the failure to NHTSA Campaign Number: 16V345000 (Service Brakes, Hydraulic). The manufacturer was notified of the failure and confirmed that the VIN was not associated with any recalls related to the failure. The failure mileage was approximately 145,000.

When on interstate or main road it shifts from 6th gear to first gear called Ford they said there is no recalls for my vehicle it shifts down so hard that my back tires slide without warning it is a danger

The contact owns a 2013 Ford F-150. The contact stated while driving at various speeds, the vehicle unexpectedly downshifted to first gear with the wrench warning symbol displayed. The contact was forced to reset the vehicle by turning off the vehicle, disconnecting and then reconnecting the battery, for the vehicle to resume normal operation. Upon investigation, the contact discovered NHTSA Campaign Number: 19V075000 (Power Train); which was linked to the failure. The contact used a code reader that showed a defect with the speed sensor inside the transmission control unit. The manufacturer was notified of the failure but offered no assistance. The contact was referred to the NHTSA Hotline to report the failure. The vehicle was not repaired. The failure mileage was approximately 103,000.

The contact owns a 2013 Ford F-150. The contact stated while driving at various speeds, the vehicle was running rough and there was a strong burning smell. The vehicle was taken to an independent mechanic, who diagnosed that the ABS fuse was overheating, was damaging the brake pads and rotors, and was causing the vehicle to overheat. The mechanic advised the contact to remove the ABS fuse, and the contact removed the fuse. The vehicle was later taken to another independent mechanic, where it was determined that the failure was related to the ABS module. The vehicle was taken to a transmission specialist, where the same assessment was made. The vehicle was taken to an unknown dealer, where it was diagnosed that the ABS module had failed and needed to be replaced. The vehicle was not repaired due to the cost. The contact stated while driving approximately 50 MPH and approaching the stop light, the vehicle in front of her vehicle stopped prematurely. The contact stated that upon depressing the brake pedal to stop the vehicle, the vehicle decelerated but failed to stop as intended and crashed into the rear of the other vehicle. The contact stated that the ABS and the traction control warning lights were illuminated. The air bags did not deploy. The contact hit the right leg shin area against the dashboard and sustained a punctured wound on the leg. The contact also sustained a swollen right leg and back pain. The emergency units physically examined the contact and recommended medical assistance for the right leg injury. The contact later went to urgent care but could not afford the cost of the medical care. The contact then treated the injuries at home. It was unknown whether the other driver sustained injuries. There was no property damage. A police report was filed but the contact did not have the information available. The police determined that it was a no-fault accident. The contact was able to drive the vehicle from the scene. The vehicle was not repaired. The manufacturer referred the contact to the NHTSA Hot