2017 FORD F-150 Complaints

On July 18, 2025, I was fueling my vehicle at COSTCO. I put my vehicle in park, exited and left the door open while I waited for my credit card to clear so I could start fueling my vehicle. I was out of the vehicle for about a minute when the vehicle started to move backwards. I was standing between the open door and the drivers seat and was startled when it began to move. I was hopping on one foot trying to get back into the vehicle. Ultimately, the open door hit a column at the station. There was damage done to my door. There was no warning that made me aware that the vehicle wasn't still in park and there was an impending issue.

Component: 6r80 transmission lead frame Safety: Driving at 70mph on the interstate on 07/23/2025 and vehicle violently downshifted while in cruise control. Rear tires locked briefly. Driver and passenger were restrained by the seat belts or there would have been a loss of control. I was able to pull to the side of the road. Reproduced: This is the third time in a year that this has happened. Independent shop is scheduled to inspect. DTC codes P061A and P0722 are logged in the PCM. Warning Lamp: After the incident, an amber wrench icon was displayed. Still displayed after restart. Disappeared after 2nd start.

The contact owns a 2017 Ford F-150. The contact stated that while the vehicle was being traded in at the dealer, the contact was informed that the cam phasers needed to be replaced. The vehicle was taken to a second dealer, Upper Marlboro Ford (5701 Crain Hwy, Upper Marlboro, MD 20772), who also determined that the cam phasers needed to be replaced. The vehicle was not repaired. The contact related the failure to Customer Satisfaction Programs: 21N03 (Cam Phaser Replacement) and 21B10 (Powertrain Control Module Reprogram for Cam Phaser Rattle); however, the VIN was not included. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The failure mileage was approximately 100,000.

When I turn my windshield wipers on during rain, I can't turn them back off. They WILL NOT TURN BACK OFF. I have to pull off the road and turn the truck off and then restart the truck.. Sometimes this works and sometimes this doesn't work either. THIS IS A VERY ANNOYING PROBLEM. This can be a safety issue if I am trying to deal with this and get off the road to turn the truck off. I also own a 2019 F150 and now it has started doing the EXACT same issue. I don't feel this is a problem for the owner. I feel there is a defect in these two trucks. I feel there should be a recall on this issue. I have talked to the Ford dealership about this issue. There are no warning lamps, messages or other symptoms of the problem prior to the failure. The date this first started is around April 2025 but I don't know the exact date. THANK YOU VERY MUCH:

The contact owns a 2017 Ford F-150. The contact stated that there was a small oil leak coming from the vehicle. There were no warning lights illuminated. The contact stated that the failure was a known issue that was related to the Customer Satisfaction Program: 21N03. The vehicle was taken to the local dealer, where the oil leak was confirmed, and the dealer was informed about issues with the cam phasers. The vehicle was not repaired. The manufacturer was contacted and transferred the contact to the NHTSA Hotline. The failure mileage was approximately 60,000.

The contact's husband owns a 2017 Ford F-150. The contact stated that while her husband was stopped at a red light, the vehicle shut off with an "Alarm" alert message on the instrument panel. The contact's husband sought assistance and had the vehicle jumpstarted, and the vehicle restarted. The vehicle was taken to an independent mechanic where an oil change was performed, and the battery was tested, and the contact was informed that the battery was in good condition. Upon leaving the mechanic, the vehicle shut off again but another attempt to jumpstart the vehicle failed. The vehicle was towed to a dealer. The vehicle remained with the dealer for four days; however, the dealer could not duplicate the failure. The failure persisted upon return of the vehicle and the vehicle was towed to LaFontaine Ford Grand Rapids (3385 Alpine Ave NW, Grand Rapids, MI 49544); where it remained unrepaired. The manufacturer was notified of the failure and the contact was referred to the NHTSA Hotline to report the failure. The failure mileage was 74,800.

The contact owns a 2017 Ford F-150. The contact stated that while cold-starting the vehicle, there was an abnormal rattling sound coming from the vehicle. After the vehicle had warmed up, the sound dissipated. While the contact’s mother was driving the vehicle, there was an abnormal rattling sound coming from the vehicle. The contact stated that there was a faint, unidentifiable sound in the vehicle prior to the start of the rattling sound. The contact stated that the failure was related to Customer Satisfaction Program: 21N03, related to the cam phaser. The contact, who is a mechanic, had been completing an oil change on the vehicle. The contact stated that the failure was related to the cam phasers. The contact called the local dealer, but there was no answer. The vehicle was not diagnosed or repaired. The manufacturer was contacted and referred the contact to the NHTSA Hotline. The failure mileage was approximately 130,000.

Back up camera does not work blank blue screen or freezes up or graney view can't see any possible hazards behind vehicle.

While driving with my cruise control at 75, the instrument cluster began to blink on and off like it was shorting out. Then the truck would suddenly downshift and search for a gear. It continued to do this until I could exit the highway. The truck aggressively downshifted multiple times quickly decelerating the vehicle. It was pretty scary.

My 2017 Ford F-150 is experiencing an oil pan leak. F150 model is equipped with the 2.7L EcoBoost engine. This is a lack of RTV adhesion at the oil pan seal. My dealership wants over 1k to fix which I refuse to pay. This issue was created by poor engineering and craftsmanship on Fords end and the consumer should not have to pay to fix this known issue. I understand there is a fix that involves a 1-piece aluminum pan, as seen on many you tube videos. I'm requesting that Ford be held responsible for fixing this issue and not the consumer, who paid a lot of money for this truck. Any help in getting this resolved would be greatly appreciated.